THE TM MWS thread

[Davegolf]

On a standard gun the HSB drops in with no adjustment.

If you run much higher power and/or a lightweight bolt you may also need to unscrew 1 turn.

 

[TadsJ2]

On a standard gun the HSB drops in with no adjustment.

If you run much higher power and/or a lightweight bolt you may also need to unscrew 1 turn.

Yeah, so i understood correctly, thanks 

I have one more question, isnt the bolt travel speed tied to how much FPS my gun is shooting at? I am asking because yesterday i thought that the bolt carrier speed is directly linked to it ONLY (while my gun had 410mm crazy jet, 2021 decepticon 70 degree, G&P NPAS nozzle 5.0) but when I lowered the fps with G&G NPAS to 270fps it still didnt lock the bolt for me... So I guess this is not entirely true is it? Can this also be because of a better airseal?  I noticed that gas efficiency was waaay better than it was with AG V2 NPAS nozzle, and maybe thats what also has some effect on bolt carrier traveling speed? 

 

[Wild Weasel]

TadsJ2 10p is similar diameter as a quarter dollar (I have both in my buffer tube)

Once again kudos to fire support for helping me out as the John Wick fde bolt carrier from angry gun does not accept the standard size sealing buffer without binding in the bore (dp enhanced or Marui), additionally the gas key nozzle guide will pull straight off the slightly smaller screws on the top of the carrier. So in order to use this effectively with whatever nozzle you decide to use you will require the sealing buffer and the plastic guide gas key from angry gun to make it work effectively in my opinion.

So hats off to fire support for helping me sort these items in time for my next game cheers lads.

Aftermarket parts are turning into absolute nightmare for me, I wish to God I could just buy a standard bare Marui bolt from somewhere.

 

[TadsJ2]

So long story short - i've put everything back, meaning, ML 410mm crazy jet, decepticon + omega nub, G&P reinforced nozzle set, dynamic precision enchanced sealing buffer, AG 170% nozzle return spring, G&P Nozzle NPAS 5.0...
AND unscrewed buffer tube by one full cycle back... AND bolt lock works now, though not everytime on one of the mags, but it works pretty damn well, i dont want to give another turn because of what WildWeasel told me, so I will just wait out for HSB to arrive to me and then will try to give it another full rotation backwards and see the results  But for now i am really happy with it, i've put my NPAS to shoot on 394FPS, and it holds it really REALLY god damn well, its WAY better than AG V2 NPAS (no surprise here, huh). 
I also got the G&P adjustable piston valve if for some reason G&P 5.0 NPAS will start failing me  

Thank you for your help guys, I really appreciate it and cant wait to field my gun to see the differences of the innerbarrel and bucking upgrade  
Have a nice one

 

[TadsJ2]

Okay guys, so up to the next problem.
I've read in this tread that buffer tube cap unscrewing itself is no big deal and i should use loctite... What loctite do you suggest me using? Low or medium power?

Another problem I also ran into yesterday was with G&P 5.0 NPAS nozzle:
 In my setup the gun is shooting too hot, field limit for non dmr's is around 425FPS, i was trying to set up my MTR to shoot at 393FPS but it is practically impossible for me to do that with only trying to set up NPAS. I can set it up to have  a consistent 380-387FPS or 410FPS , and I would be fine with 410 FPS but it randomly shoots up to 442FPS which is way over my field limit and judges wont let me field my gbbr  
I thought that this is probably of NPAS screw getting too loose, so i loctited it with medium strength loctite, but still, its either 387 or 410 FPS with random 1-2 shots with +10 FPS. 
So my question to you is what can i do to loose ~10FPS ? I would like to go for ~400FPS on my build for summer games.
I've got a Guns Modify 150% Nozzle Reset Spring Set installed, in my G&P reinforced nozzle set, so i've wondered if i would change the spring which is holding nozzle in place to a standard one, would it lower my FPS? 

 

[Wild Weasel]

Okay guys, so up to the next problem.
I've read in this tread that buffer tube cap unscrewing itself is no big deal and i should use loctite... What loctite do you suggest me using? Low or medium power?

Another problem I also ran into yesterday was with G&P 5.0 NPAS nozzle:
 In my setup the gun is shooting too hot, field limit for non dmr's is around 425FPS, i was trying to set up my MTR to shoot at 393FPS but it is practically impossible for me to do that with only trying to set up NPAS. I can set it up to have  a consistent 380-387FPS or 410FPS , and I would be fine with 410 FPS but it randomly shoots up to 442FPS which is way over my field limit and would judges wont let me field my gbbr  
I thought that this is probably of NPAS screw getting too loose, so i loctited it with medium strength loctite, but still, its either 387 or 410 FPS with random 1-2 shots with +10 FPS. 
So my question to you is what can i do to loose ~10FPS ? I would like to go for ~400FPS on my build for summer games.
I've got a Guns Modify 150% Nozzle Reset Spring Set installed, in my G&P reinforced nozzle set, so i've wondered if i would change the spring which is holding nozzle in place to a standard one, would it lower my FPS? 

Just as a suggestion you could try if you have a spare to shorten the spring in front of the npas to reduce the gas required before the valve closes and the excess is used to cycle the action?

 

[TadsJ2]

Just as a suggestion you could try if you have a spare to shorten the spring in front of the npas to reduce the gas required before the valve closes and the excess is used to cycle the action?

so in theory this should help with gas consistency? will it affect FPS? 

 

[sabaka]

Okay guys, so up to the next problem.
I've read in this tread that buffer tube cap unscrewing itself is no big deal and i should use loctite... What loctite do you suggest me using? Low or medium power?

Another problem I also ran into yesterday was with G&P 5.0 NPAS nozzle:
 In my setup the gun is shooting too hot, field limit for non dmr's is around 425FPS, i was trying to set up my MTR to shoot at 393FPS but it is practically impossible for me to do that with only trying to set up NPAS. I can set it up to have  a consistent 380-387FPS or 410FPS , and I would be fine with 410 FPS but it randomly shoots up to 442FPS which is way over my field limit and judges wont let me field my gbbr  
I thought that this is probably of NPAS screw getting too loose, so i loctited it with medium strength loctite, but still, its either 387 or 410 FPS with random 1-2 shots with +10 FPS. 
So my question to you is what can i do to loose ~10FPS ? I would like to go for ~400FPS on my build for summer games.
I've got a Guns Modify 150% Nozzle Reset Spring Set installed, in my G&P reinforced nozzle set, so i've wondered if i would change the spring which is holding nozzle in place to a standard one, would it lower my FPS? 

i used blue (medium) loctite for end cap and for screw too.

 

[AlphaBear]

I’ve been having way too much fun here. Let me explain......

So, I wanted to try out a Unity mount on the MWS and wasn’t sure if I’d want to spend £200 on the real deal. I mean what if I didn’t like it? It’s a lot of money to spend on a real steel mount especially if you don’t like it afterwards. So fortunately Unity provide a template which you can download and create a mock up model of the mount. So guess what I did. Yup. Craft time ?

Whatcha think fellas? Cerakote it? ?. 
 

On a serious note the mount is pretty tall. It’s a 2.26inch variant which gives you a better shooting position when looking down the barrel.

So based on this would you buy one? 

View attachment 73560

View attachment 73558

View attachment 73562

View attachment 73561

 

[C-Diddy]

I’ve been having way too much fun here. Let me explain......

So, I wanted to try out a Unity mount on the MWS and wasn’t sure if I’d want to spend £200 on the real deal. I mean what if I didn’t like it? It’s a lot of money to spend on a real steel mount especially if you don’t like it afterwards. So fortunately Unity provide a template which you can download and create a mock up model of the mount. So guess what I did. Yup. Craft time ?

Whatcha think fellas? Cerakote it? ?. 
 

On a serious note the mount is pretty tall. It’s a 2.26inch variant which gives you a better shooting position when looking down the barrel.

So based on this would you buy one? 

View attachment 73560

View attachment 73558

View attachment 73562

View attachment 73561

Awesome! What brand tape do you recommend to secure it to the upper?

 

[AlphaBear]

Awesome! What brand tape do you recommend to secure it to the upper?

Real steel brand of sellotape. No knock off clone tape 

 

[camden]

I’ve been having way too much fun here. Let me explain......

So, I wanted to try out a Unity mount on the MWS and wasn’t sure if I’d want to spend £200 on the real deal. I mean what if I didn’t like it? It’s a lot of money to spend on a real steel mount especially if you don’t like it afterwards. So fortunately Unity provide a template which you can download and create a mock up model of the mount. So guess what I did. Yup. Craft time ?

Whatcha think fellas? Cerakote it? ?. 
 

On a serious note the mount is pretty tall. It’s a 2.26inch variant which gives you a better shooting position when looking down the barrel.

So based on this would you buy one? 

I bought it and love it. It just takes a little to get use to as it does change your sahooting position for the better!

View attachment 73560

View attachment 73558

View attachment 73562

View attachment 73561

 

[AlphaBear]

If you have a spare moment can you lob up a pic of it on one of your RIF's. And are you using any magnification with your optic? Thx

 

[camden]

If you have a spare moment can you lob up a pic of it on one of your RIF's. And are you using any magnification with your optic? Thx

View attachment 73570I View attachment 73570View attachment 73569View attachment 73568

 

[AlphaBear]

View attachment 73570View attachment 73569View attachment 73568

I’m trying not to look at that hole where the screw should be in the rail. Damn Ocd.  ?

The mount does look good! I’m warming to it truth be told. The PTS version is supposed to be a very good licensed replica as you already know from having one.  Thanks for the pics. Appreciated. 

 

[camden]

I’m trying not to look at that hole where the screw should be in the rail. Damn Ocd.  ?

The mount does look good! I’m warming to it truth be told. The PTS version is supposed to be a very good licensed replica as you already know from having one.  Thanks for the pics. Appreciated. 

Just so that you can sleep better tonight: replacement screw is in the post from HAO ?

There is an even cheaper version available on ebay I have just been made aware, just search for: Unity Style Fast Micro Aimpoint T1 / T2 High Rise Mount Only Black / FDE Airsoft

 

[Wild Weasel]

so in theory this should help with gas consistency? will it affect FPS? 

Sorry mate, your right it won't help with consistency it will just increase the FPS.  I should have read your post more carefully.

 

[TadsJ2]

Sorry mate, your right it won't help with consistency it will just increase the FPS.  I should have read your post more carefully.

Its okay dude, i wanted to decrease the fps a lil bit, thanks for the tip, but can you clarify, what you suggested to do it will help with gas consistency?

 

[Wild Weasel]

Its okay dude, i wanted to decrease the fps a lil bit, thanks for the tip, but can you clarify, what you suggested to do it will help with gas consistency?

Nothing, I totally mis read your post. What I was getting at was lengthening the valve spring in the nozzle should cause the valve to close slower (in theory) and increase FPS and conversely shortening it should close faster and decrease FPS.

 

[Recoil_]

I’ve just joined the club! Just awaiting an optic and then I’m all set. I’m running it on green gas and I have an upgraded rubber and hop arm to change out. 
 

What’s a good barrel tool to remove the barrel so I can change the parts?
 

The buffer is plastic, any good replacements for when it may break?

View attachment 73665