THE TM MWS thread

I have seen the laylax version Alphabear, and have read the reviews on it.( all good )

The Wiitech version with the concaved contact area sounds interesting and slightly more similar to the sixG nub

 
They probably copied the best of SixG and Laylax to create their version lol

 
Sods law. 

Dave emailed me this morning and has nubs available again.

I already have the arm on order but quite tempted to order one anyway. 

Has anyone done an arm vs nub test on a stock rubber with the same setup to test the difference?

 
ajumma said:
But you're still missing outer barrel, hop chamber, dust cover etc. Also I've see Angrygun have a new gen 2 of their MK16 (which honestly looked horrific before) and it seems promising!

Edit: now I think about it, taxes would kind of suck... I think international shipping is free with orders over $150 though so that's not a problem. It's probably not even worth trying to build an upper and instead pick up a boneyard MWS but they're so rare ?
Click to expand...
Click to shrink...


dont do it. the Angry gun MK2 rail is dogshit. they have changed the barrel nut so it only works with Angry gun spacers which you can only get with their outer barrel kits and do not include the spacer (they claim they will in future when I complained) The finish is crap, it scratches super easily. the bolts are still wobbly . I mean, it looks OK...but HAO is cheaper and waaaaaaaaay better! 

Captain Darling said:
Both good points guys. I just needed it for a game in December so it was easier to shove the Marui BCG back in. 
 

I will have a look at it next week, I’ve recently got my hands on a Angry Gun high speed buffer, so that’s something else to mess with. I love tuning this gun, it’s much more rewarding than an AEG in that department. 
 
Click to expand...
Click to shrink...
I got an AG high speed bolt...returned it. Junk like most AG parts. TM Piston wouldnt fit without modding as the body was too tight. AG piston was also tight but not as bad as the TM one. The key (the bit that holds the piston in the BC) wouldnt fit without modding. 

AG only test their parts with their parts. They do not check against stock parts. I have bought soooo many AG parts in the last few months. Only the flash hiders are any good, the rest (bolt release, mag catch, bolt catch, bolt etc etc) are all shite in different ways. 

 
Groot said:
Sods law. 

Dave emailed me this morning and has nubs available again.

I already have the arm on order but quite tempted to order one anyway. 

Has anyone done an arm vs nub test on a stock rubber with the same setup to test the difference?
Click to expand...
Click to shrink...
Yep same here. But i went ahead and ordered

 
quango2k said:
dont do it. the Angry gun MK2 rail is dogshit. they have changed the barrel nut so it only works with Angry gun spacers which you can only get with their outer barrel kits and do not include the spacer (they claim they will in future when I complained) The finish is crap, it scratches super easily. the bolts are still wobbly . I mean, it looks OK...but HAO is cheaper and waaaaaaaaay better! 

I got an AG high speed bolt...returned it. Junk like most AG parts. TM Piston wouldnt fit without modding as the body was too tight. AG piston was also tight but not as bad as the TM one. The key (the bit that holds the piston in the BC) wouldnt fit without modding. 

AG only test their parts with their parts. They do not check against stock parts. I have bought soooo many AG parts in the last few months. Only the flash hiders are any good, the rest (bolt release, mag catch, bolt catch, bolt etc etc) are all shite in different ways. 
Click to expand...
Click to shrink...
AG do make great suppressors (I have one) but of course you need to use their flashider which actually is pretty decent.

 
Groot said:
Sods law. 

Dave emailed me this morning and has nubs available again.

I already have the arm on order but quite tempted to order one anyway. 

Has anyone done an arm vs nub test on a stock rubber with the same setup to test the difference?
Click to expand...
Click to shrink...


I don't have a nub but have had the wii-tech arm installed for about 1.5ish years. Never had an issue. Have shot up to .36's with room to hop heavier. I generally just run .3's though and run it with the Tan Modify bucking.

 
Anyone know if the MWS buffer tuber is the same as the NGRS buffer tube. I am after a customer castle nut and found someone who makes them for the NGRS

 
The MWS and the NGRS castle nuts use the same laylax spanner. But the castle nuts are advertised separately even though they look the same to me. 
 

Ive just taken a set of callipers to mine and that MWS buffer tube is smaller in diameter than the NGRS one. It’s not by much but there is a difference. 

 
The new pmag will be a lightweight of around 373g  and cost roughly the same as the regular magazines. ( I can already see all those SAA pmags entering the sales corner )

— — —

P.S the screws for the bottom plate of the OG mags are standard M2 threading right? 

View attachment 70350

P.S the screws for the bottom plate of the OG mags are standard M2 threading right? 

 
Last edited by a moderator:
gunbod007 said:
How often do the nozzles break? I have heard its the most likely thing to go but I am hoping to get a few games out if it at least haha
Click to expand...
Click to shrink...


Mine was a unique case as you all know haha but these are supposed to be pretty robust... Yes they can take a hammering so-to-speak but at the end of the day it's a plastic nozzle slamming against a plastic bb and over time it will fail.. fail in this context means the  front of it getting really battered... It should easily last a year or two with normal use I should think? I'm sure others with more MWS usage experience can jump in...

 
You must log in or register to reply here.

Similar threads

Nick G
VFC M249 Thread
9 10 11
Replies
203
Views
27K
Nick G
Nick G
Back
Top