-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Aye good shout. I have a spare Marui nozzle and a couple of G&P and one very angry gun one too lol
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Hello all, got a problem with my mws, the barrel is loose and can twist left to right ( twisting it whilst holding onto the handguard counter clockwise re-centers the barrel ) about 3 mm, might be less than 3 mm but it's definitely noticeable. it's effecting accuracy, twisted back center it seems to shoot pretty much spot on, twist it the other way and it's 2-3 inch over to the left of point of aim. Anyone had this problem? Thank you for your time Ryan.
Last edited by a moderator:
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Hypokondrikern
Members
- Oct 15, 2019
- 163
- 36
How often do they restock at Impulse 101? Every quarter? Probably even slower with the ongoing pandemic but I never see the parts for a second upper in stock.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Things will improve as time goes on. They stock as and when and a lot of MWS stuff flies out quick. Especially nozzles and nozzle springs. 6 months from now it may all be getting back to a normal. It’s simply a waiting game.
Laylax M4 Sopmod wrench. Fire Support sell them.
View attachment 69316
Last edited by a moderator:
Ah thought it would be that, thank you for the help, been following the thread for ages lol, anyone seen the TM akm coming out? Definitely on the Christmas list!
Last edited by a moderator:
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
I requested some parts the other day and got a lead time of 2 weeks to dispatch.
Hypokondrikern
Members
- Oct 15, 2019
- 163
- 36
Totally true,
I also got the same positive answer after having emailed them!
"If Marui has this part in stock we should receive it in the coming few days as we have placed an order last week.
Please register to the restock alert on the product page!
Best regards
Impulse101"
I also got the same positive answer after having emailed them!
"If Marui has this part in stock we should receive it in the coming few days as we have placed an order last week.
Please register to the restock alert on the product page!
Best regards
Impulse101"
Angrygun are really consistently pointing these days! Although my stock charging handle broke and I picked up an ambi charging handle from them and it was drop in fit, works perfectly with no issues. If only it were the same for their bolts and nozzles. It seemed promising when they posted the video of a 10,000 round full auto with the V2 nozzle but I guess their quality control is bad or something ?
I've personally tried the 3.5 G&P valve, it worked fine but didn't allow me to go UP in joules, only down. Other than that, I'm using the G&P forged bolt with their nozzle, and that brings me to 1.2 joules with 0.25's.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
It’s probably super loctited. Just apply a heat to it to melt/loosen the loctite. Obviously be careful when doing it. That sopmod wrench is really all you need and some Popeye spinach. Failing that a pack of McCoys crisps and Yorkie Bar and that will do the trick. Maybe a pint of Guinness too? Hmmmm
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Give it some welly lad ?
Thing is it’s good it’s on tight. The last thing one wants is a loose one. One needs ones buffer tube to be well tight in there. Right.? ?
Last edited by a moderator:
Similar threads
