Captain Darling
Members
- Jan 5, 2020
- 110
- 59
Which colour autobot?
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Wild Weasel
Members
- Sep 24, 2019
- 190
- 56
Well, I have a rifle clamp (home made), a laser tape measure, a 20m range, a six g nub, a standard nub, a standard 250mm barrel, a modify tan, standard TM, ml Autobot 60°, ml Mr hop rubber, some Geoff's 0.30g bb's and some spare time...
... Cue the music.
View attachment 67136
View attachment 67137
View attachment 67138
... Cue the music.
View attachment 67136
View attachment 67137
View attachment 67138
Wild Weasel
Members
- Sep 24, 2019
- 190
- 56
demandt
Members
- Aug 9, 2020
- 18
- 11
@SSPKali awesome writeup regarding the WiiTech trigger parts. I've been eyeing them for a while now but have been undecided as to whether they are a definite improvement. Could you perhaps give a description of how you experience using the trigger with the WiiTech parts compared to the stock one. Is it a heavier pull? Better, more tactile wall and reset? A few descriptive words would be awesome.
Due to COVID I haven't had much of a chance to use the MWS but my initial thoughts are that the pull is lighter AND smoother with none of the notchy feel the original (and rather well used!) parts had. Break point is crisp and predictable, you can get a feel for pulling it to 80% of the way and holding it while deciding whether to pull off a shot or allow it to re-set.
The parts were pricy but worth it and the quality of finish is a whole other level
Lets hope come spring I can get back out to play and give it a full work over.
n00b1982
Members
- Aug 25, 2020
- 70
- 19
Hi, can someone help me please. I'm trying to pay for the sixg super nub. I've emailed Dave asking for the details to do so, but he didnt out anything in the response form as to how to pay him lol.
Am I just being blind and not seeing where I can do it? Or does anyone know the details to use?
Thanks
Am I just being blind and not seeing where I can do it? Or does anyone know the details to use?
Thanks
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
MWS No 2 build progress:- KAC MRE
Kinda when down a different path than a modern 416/Clay build!
Sorry to disappoint those waiting for glorious HAO based 416 goodness!
I've always loved the MK12 and whilst researching and toying with going down that route, I stumbled across the Knights 'MRE' rail which was used by CAG many moons ago!
As soon as I saw it I knew that's the rifle I wanted to build, so using a few G&P parts and some bits I already had going spare.
The G&P ambi selector and Knights style ambi mag release both work perfectly! Angry Gun could learn a thing or two!
It's not finished yet, as there's a few more bits like the stock, grip, and the fabled KAC rail covers to go on.
Then there's tricky decision on what optic/mount to fit. Either a short dot or an old school Comp M2/M4, maybe even an early Eotech 551?
Will keep you all updated as things progress. ?
View attachment 67282
View attachment 67283
Kinda when down a different path than a modern 416/Clay build!
Sorry to disappoint those waiting for glorious HAO based 416 goodness!
I've always loved the MK12 and whilst researching and toying with going down that route, I stumbled across the Knights 'MRE' rail which was used by CAG many moons ago!
As soon as I saw it I knew that's the rifle I wanted to build, so using a few G&P parts and some bits I already had going spare.
The G&P ambi selector and Knights style ambi mag release both work perfectly! Angry Gun could learn a thing or two!
It's not finished yet, as there's a few more bits like the stock, grip, and the fabled KAC rail covers to go on.
Then there's tricky decision on what optic/mount to fit. Either a short dot or an old school Comp M2/M4, maybe even an early Eotech 551?
Will keep you all updated as things progress. ?
View attachment 67282
View attachment 67283
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Yes Rob! Old school/FSP build!
I think an aimpoint M4s would be lovely if one can be found
View attachment 67284
It’s annoying for me, I love the old skool setups, but the pistol grip angles kill my wrist ?
I think an aimpoint M4s would be lovely if one can be found
View attachment 67284
It’s annoying for me, I love the old skool setups, but the pistol grip angles kill my wrist ?
Last edited by a moderator:
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
Thanks bud, I'm really pleased with it so far!
I've got a Hogue and an Ergo pistol grip on order so will see which I prefer, but your right that angle can't compete with the likes of a Magpul K2!
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
Before I do a buy, the MWS can take AEG barrel nuts? The Daniel Defence Mk18 rail I have on mine currently is rated for AEG.
But this puppy is the one ive been after since ive owned the MWS.
https://www.davescustomairsoft.co.uk/External-Parts/rail-systems/Big-Dragon-G-Style-SMR-M4-AEG
THERES STOCK
So I wanna check and confirm before I buy one.
But this puppy is the one ive been after since ive owned the MWS.
https://www.davescustomairsoft.co.uk/External-Parts/rail-systems/Big-Dragon-G-Style-SMR-M4-AEG
THERES STOCK
So I wanna check and confirm before I buy one.
The MWS has regular AEG threads and takes AEG barrel nuts. However, if you are using the stock outer barrel you will need a few millimeters of outer barrel shims or an “adapter ring” for the MWS, because the TM outer barrel “lip” (not sure what to call it) is out of spec and requires shims if you use an aeg barrel nut or the outer barrel will not be secure and wobble a lot.
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
Yep already got one of them in stock, and im suing a Laylax barrel kit. No shim required for me!
Do you mean the Angrygun MPA nozzle? You can increase and decrease power on it, as you could with the original. Iirc theres a video where they got it to 420fps with 0.2
Yes, that is the one. I just can not find that video. Would like to be sure it was a standard MWS, my own shoots more than 420fps on a summer day and the only thing that is changed in it is the barrel.
Because when running an oldschool grip you need to master the oldschool technique.
View attachment 67384
quango2k
Members
- Jul 20, 2020
- 293
- 74
Hi all, I am joining the MWS gang soon and have a few questions as I am a total noob.
How can I adjust power? i plan to do the mag mod for green gas and have seen it can increase the FPS? I want to be able to adjust the power on game day so I am not over the limit.
Do I need to change the nozzle spring? I see they can break
What hop mods are needed to lift .32?
Are there any other out of the box mods that are recommended?
How can I adjust power? i plan to do the mag mod for green gas and have seen it can increase the FPS? I want to be able to adjust the power on game day so I am not over the limit.
Do I need to change the nozzle spring? I see they can break
What hop mods are needed to lift .32?
Are there any other out of the box mods that are recommended?
Similar threads
