THE TM MWS thread
- Thread starter Wo1f
- Start date
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
Haha thanks bud!
The stock is a Magpul 'MOE SL-K'
Thanks Dave I'm really pleased with how it's turned out.
Your right that really would finish it off nicely!
There's the Iron Airsoft ones and Ace 1 arms isn't there? Not sure which are regarded as the better choice?
Captain Darling
Members
- Jan 5, 2020
- 110
- 59
Yes, very nice. I’ve seen photos of the RS green URGI rail, but never in airsoft. That could be a unique build you’ve got there, for now.
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
sp00n
Supporters
- Mar 27, 2013
- 2,210
- 874
Wild Weasel
Members
- Sep 24, 2019
- 190
- 56
if I remember rightly this was on the forum a few months back, basically take a grub screw and drill and screw through the centre of your rocket valve. wind it in and out to adjust FPS. If it helps to find it I replied, so look through my page as it were to find my reply, to find the post.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Any folks using the Madbull XG02 propane adapter? It's the one which has the silicon oil reservoir in it..?
I was thinking of using the Coleman propane gas bottles or Mapp gas bottles for my mags going forward... Any pros or cons of either or should we just stick to the off the shelf gases from Abbey & Nuprol etc..
thx
View attachment 66505
I was thinking of using the Coleman propane gas bottles or Mapp gas bottles for my mags going forward... Any pros or cons of either or should we just stick to the off the shelf gases from Abbey & Nuprol etc..
thx
View attachment 66505
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
I know @Wo1f & @Bada Bing and many others only run propane.
It is perfectly safe for the MWS innards.
As long as you don’t mind the smell ?
@AlphaBear unless you are going through ridiculous amounts of ammo you do not need to add lube to the gas on the MWS.
Rather as part of your maintenance routine re-grease the piston seal before or after every game day with quality silicone lube - EG TechT GunSav
Decent lube will stay inside the nozzle/piston assy, so you do not need to compromise your bucking by contaminating it with excess airborne silicone.
The pros and cons really only come down to cost and the fact you can run MaPP in the winter.
It is perfectly safe for the MWS innards.
As long as you don’t mind the smell ?
@AlphaBear unless you are going through ridiculous amounts of ammo you do not need to add lube to the gas on the MWS.
Rather as part of your maintenance routine re-grease the piston seal before or after every game day with quality silicone lube - EG TechT GunSav
Decent lube will stay inside the nozzle/piston assy, so you do not need to compromise your bucking by contaminating it with excess airborne silicone.
The pros and cons really only come down to cost and the fact you can run MaPP in the winter.
Last edited by a moderator:
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Sinistersnipe
Members
- Mar 3, 2020
- 15
- 5
FYI - i’ve had bad experience with Würth Dry Chain Lube hardening into wax below around 10 degrees, rendering my gun useless. YMMV, but I had better luck with simple silicone spray everywhere
Last edited by a moderator:
Captain Darling
Members
- Jan 5, 2020
- 110
- 59
I have 3 already! 9.3” in black, and also DDC - I couldn’t make my mind up. I’m currently fettling a DDC 14.5” on a DMR build MWS. I just love the look and feel of this skinny rail. All HAO, I really rate their workmanship.
