-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Anyone tried the TM pistol mag sized speed loader with MWS magazines?
I have the TM XL one and it works great but want a small one to carry in the field for those busy games ? I have tried my Nuprol one and only managed to spray BBs all over the floor.
View attachment 58996
I have the TM XL one and it works great but want a small one to carry in the field for those busy games ? I have tried my Nuprol one and only managed to spray BBs all over the floor.
View attachment 58996
Hypokondrikern
Members
- Oct 15, 2019
- 163
- 36
Just received my SAA pmags. Impressive build and really good finish. Love the slightly less weight ( not much - around 60 g - but ) which somehow gives them a nimble feel.
one thing though. Mine doesn’t exactly free fall out of the magwell during reloads like in the videos I have seen. Is there a need to slightly sand them somewhere?
one thing though. Mine doesn’t exactly free fall out of the magwell during reloads like in the videos I have seen. Is there a need to slightly sand them somewhere?
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
Finally a paid up member of the fine MWS club!
This beauty arrived today, and now the real fun begins, turning this CQBR into a URGI style 10.3" build!
View attachment 59044
This beauty arrived today, and now the real fun begins, turning this CQBR into a URGI style 10.3" build!
View attachment 59044
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Its all shiny and soooo new! Just like that new car smell
On a serious note, should I take the plunge too? All I hear is MWS these days... it's like the recoils are dying off and everyone is moving over to this platform....well the serious players are at least... Food for thought
- Thread starter
- #3,089
Crazy_Crystal
Members
- Nov 1, 2017
- 323
- 134
you won't regret it... don't even have to change anything if you don't want too...
- Thread starter
- #3,091
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Just installed the Laylax hop up chamber along with modify bucking. I am running into this weird issue where, the first bb that is chambered from a newly loaded mag always over hops to the sky, but all the following shots are straight and consistent. I am wondering if anyone else ran into this issue?
mr_anderson
Members
- Jun 30, 2020
- 3
- 4
Got the same chamber and bucking as well as SixG Super Nub but don't have a problem like this at all.
mr_anderson
Members
- Jun 30, 2020
- 3
- 4
New to this forum, but not new with MWS. Here is what we have in our team (mine in the middle?
View attachment 59109
View attachment 59109
I sanded them lightly and they fall perfectly
The arm hop up may be slightly blocked. But that it only happens in the first bbs is rare.
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
Managed to get down to some private land on the farm where I work and have a little play with the MWS yesterday.
I'm blown away by the stock performance with 0.28's! Will eventually fit the brass nub and see what its like with heavier ammo soon.
However I have got a little issue with it...
The mag release with no mag inserted operates freely just like any other M4 rif I have used.
Weirdly though when a mag is inserted the locking tab/bar on the opposite side of the mag release button doesn't fully engage when a mag is inserted, you can get two shots off before the mag drops down and doesent engage.
You have to push it into the receiver to lock the mag in place, and its pretty stiff. Then to release the mag the button itself is also very stiff to press, would he very tricky to do in the middle of a game!
Any ideas?
Not sure where to start and I don't want to make anything worse!
I'm blown away by the stock performance with 0.28's! Will eventually fit the brass nub and see what its like with heavier ammo soon.
However I have got a little issue with it...
The mag release with no mag inserted operates freely just like any other M4 rif I have used.
Weirdly though when a mag is inserted the locking tab/bar on the opposite side of the mag release button doesn't fully engage when a mag is inserted, you can get two shots off before the mag drops down and doesent engage.
You have to push it into the receiver to lock the mag in place, and its pretty stiff. Then to release the mag the button itself is also very stiff to press, would he very tricky to do in the middle of a game!
Any ideas?
Not sure where to start and I don't want to make anything worse!
Last edited by a moderator:
Crazy_Crystal
Members
- Nov 1, 2017
- 323
- 134
It sounds like the tolerance on the mag release where it it holds the mag in as a bit too tight... as to whether you want to sand it down a little is up to you. although I can't be sure without seeing it in person.
RMDavis
AF-UK patch owner
- Oct 6, 2018
- 369
- 199
I think your right bud,
I had another little play on my lunch break today at work, and the mag will seat perfectly if you give it a bloody firm push when its inserted, and again it will release just fine when the mag is pulled slighy towards yourself when the release button is pressed.
I can only put it down to very tight tolerances, and even after a few mag changes today its already improved dramatically.
I'm sure with time and a few games under its belt it will loosen up a little! ?
Crazy_Crystal
Members
- Nov 1, 2017
- 323
- 134
if it's loosened up a little already then you're almost certainly right. it sounds like they have tightened the tolerance without thinking about the thickness of the paint on the mag... it's probably just one of those things at least that means you should have very good consistency due to a solid gas seal.
Similar threads
