- Thread starter
- #2,421
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Crazy_Crystal
Members
- Nov 1, 2017
- 323
- 134
apologies @Wo1f I forgot to put the link in. it was just a small comment at the end of the article;
"On the other hand, don’t expect this to be the end of their SCAR plans. HAO’s CEO also mentioned an MWS SCAR will follow the PTW.”
https://www.google.com/amp/s/thereptilehouseblog.com/2019/12/11/hao-scar-ptw/amp/
so probably not soon, but possibly in the next few years.
"On the other hand, don’t expect this to be the end of their SCAR plans. HAO’s CEO also mentioned an MWS SCAR will follow the PTW.”
https://www.google.com/amp/s/thereptilehouseblog.com/2019/12/11/hao-scar-ptw/amp/
so probably not soon, but possibly in the next few years.
My mws with a lightweight bolt carrier doesn't like anything but nuprol 3.0 this time of the year, I've tried most gases and abbey brut seems very weak even tho it's advertised as their most powerful gas.
Will probably have to move to black as it gets colder.
What you guys using currently?
Will probably have to move to black as it gets colder.
What you guys using currently?
It was around 7 degrees today and I was running Vertex. With the Angry Gun MPA as open as I could whilst still feeling decent resistance on the grub screw I was getting around 285fps with .43s (that converts to around 400fps on .2)
Annoyingly, I had a few issues today that are worth putting in here to help people.
1. This has been spoken about on here but the Angry gun MPA nozzle wasn’t returning quickly upon firing. This seems to cause double feeds, jams etc. And eventually all my mags to gas out on the first shot. Upon investigation, this was because of the sealing cup is it called? I haven’t swapped it out with the stock Marui one, but instead put a bit of silicone oil around it, as well as on my thumb and put that around the chamber it slides into. The result was it going from slowly returning (bad) to pinging back almost instantly (good). Not convinced you need to replace with the TM one, will see if it keeps working with the lube.
2. The Modify Tan bucking has broken. I’m actually kind of surprised by this as I’ve only taken it out to maybe half a dozen games, and given that I play single shot marksman role and often swap to another gun half way through, it can’t have had that many rounds through it. Will put another in and see how it goes (wish it wasn’t so hard to get the front off!).
Annoyingly, I had a few issues today that are worth putting in here to help people.
1. This has been spoken about on here but the Angry gun MPA nozzle wasn’t returning quickly upon firing. This seems to cause double feeds, jams etc. And eventually all my mags to gas out on the first shot. Upon investigation, this was because of the sealing cup is it called? I haven’t swapped it out with the stock Marui one, but instead put a bit of silicone oil around it, as well as on my thumb and put that around the chamber it slides into. The result was it going from slowly returning (bad) to pinging back almost instantly (good). Not convinced you need to replace with the TM one, will see if it keeps working with the lube.
2. The Modify Tan bucking has broken. I’m actually kind of surprised by this as I’ve only taken it out to maybe half a dozen games, and given that I play single shot marksman role and often swap to another gun half way through, it can’t have had that many rounds through it. Will put another in and see how it goes (wish it wasn’t so hard to get the front off!).
I had issue's with the modify tan, I only ran it for a little while maybe 1000 rounds at best.
I can't recommend the modify x range enough, the accuracy and consistency is miles above the traditional mound style buckings. I'm not sure how long it will last but for £8 it's worth ago.
Y
Yukarin
Guest
While my MPA nozzle worked fine with its sealing buffer with lots of lube. I prefer to run my MWS as dry as possible so the barrel and bucking don't get dirty. So i swapped back to the stock sealing buffer.
Are you using it with the SixG nub, what sort of inner barrel too?
EvilMonkee
Members
- Feb 17, 2014
- 2,346
- 1,328
My mate - its too cold today for gas guns....its 5 degrees..
My MWS - hold my beer....
My MWS - hold my beer....
I was running my MWS until my issues then swapped to my MP7 and HK45 which performed as beautifully as ever. I’m yet to see evidence of this “gas guns don’t work in winter” filth peoole bang on about! Even had the MP7 on full auto!
I had issue's with the modify tan, I only ran it for a little while maybe 1000 rounds at best.
I can't recommend the modify x range enough, the accuracy and consistency is miles above the traditional mound style buckings. I'm not sure how long it will last but for £8 it's worth ago.
EvilMonkee
Members
- Feb 17, 2014
- 2,346
- 1,328
I deffo didnt have the range that I usually get with it but it was still good enough.
The GHK AK struggled until around 1300 when it had warmed up a wee bit, then it was fine. Got some really nice long range kills with it, but its a lot heavier in the bolt carrier group than the MWS. The TM AKM will be very interesting.
The GHK AK struggled until around 1300 when it had warmed up a wee bit, then it was fine. Got some really nice long range kills with it, but its a lot heavier in the bolt carrier group than the MWS. The TM AKM will be very interesting.
Yes got the SixG nub and standard barrel, I have seen that the x range buckings need a large window.
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Had quite a few Modify Tan failures now, the material seems to tear easily.
@Whisky1 you only mentioned the Mod X to be accurate at 35M so far, has this improved?
Standard TM with Super Nub give effective 50M+
The Mod tan with Super Nub improved on that effective range by giving slightly better gas consistency, so better shot placement consistency on the vertical plane.
@Whisky1 you only mentioned the Mod X to be accurate at 35M so far, has this improved?
Standard TM with Super Nub give effective 50M+
The Mod tan with Super Nub improved on that effective range by giving slightly better gas consistency, so better shot placement consistency on the vertical plane.
- Thread starter
- #2,433
Mine ran great at the night game on Saturday. 4 degrees and briefly snowing ran on propane topped up with some Mapp gas.
The modify tan does seem to wear down quicker, but the results are great. I think I’ll get the other modify bucking and run some tests. I’ll post up what results I get.
The modify tan does seem to wear down quicker, but the results are great. I think I’ll get the other modify bucking and run some tests. I’ll post up what results I get.
I believe that was the someone else Dave.
I personally have shot out to 60-70 metres accurately with the X range, if anything I'd say it gives you a flatter trajectory for longer then the tm standard.
This is now my go to rubber....??
@wo1f can I ask what Propane adaptor you are using? Any changes to the mag fill valves?
TIA
- Thread starter
- #2,438
Airsoft innovations. The tan coloured plastic one. Done the green gas mod (cutting the tubes down, not removing). Nothing to the valve itself.
MWS in a box. Still need to add a Vortex Sparc AR and a tracer unit (aftershave used to judge size!). Middle layer of foam will hold 4 mags, and bottom layer a pistol and tool kit.
View attachment 52233
View attachment 52233
A
adas1223
Guest
nice, what is that box?
Similar threads
