• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Does anyone know if there will ever be as much aftermarket for the type 89?? Really looking for a shorter outer barrel and rail system, I know Prometheus makes them for the AEG but I have no clue about cross compatibility. Does anyone?

 
I really dig the type 89 gbb but I’m just concerned about the aftermarket support. I’m mostly curious about whether I can do the same barrel and hop mods as m4 mws users and if there will ever be a shorter outer barrel or rail system. Prometheus/laylax make them for the type 89 aeg but I have no clue about the cross compatibility. Does anyone have any input on this?

 
UKCYukarin said:
nah just took off the upper completely so i didn't bang it around when wrapping the tape around the catch. I also discovered that if I have the screw for the bad lever on too tight then the catch won't engage, so make sures yours is a little loose (tiny bit of play between the 2 parts of the bad lever)
Click to expand...
I have done it. I have applied 3 - 4 layers. It kinda works. But at least now the bolt catch is catching but just not 100% of the time. Still better than before. Thank you very much. Anyway here is my on going project.... still a few things to add onto it...

View attachment 46619

 
bapexxx said:
I have done it. I have applied 3 - 4 layers. It kinda works. But at least now the bolt catch is catching but just not 100% of the time. Still better than before. Thank you very much. Anyway here is my on going project.... still a few things to add onto it...

View attachment 46619
Click to expand...
mine catches 100% of the time, have you tried loosening the screw on the BAD lever a little bit?

 
UKCYukarin said:
mine catches 100% of the time, have you tried loosening the screw on the BAD lever a little bit?
Click to expand...
Yep. There is a tiny bit movement on the lever. Maybe I need to actually put a tiny thing underneath that thing we wrapped with tape? I don't know I will try again tmr Haha. I'm playing escape from tarkov atm awesome game. If you are into PC game and hardcore shooting game. Escape from tarkov is one of the best out there atm.

 
bapexxx said:
Yep. There is a tiny bit movement on the lever. Maybe I need to actually put a tiny thing underneath that thing we wrapped with tape? I don't know I will try again tmr Haha. I'm playing escape from tarkov atm awesome game. If you are into PC game and hardcore shooting game. Escape from tarkov is one of the best out there atm.
Click to expand...
When i was wrapping around the bolt catch it was to put tape under it, so i have more tape under the catch, with some going all around it to hold it in place.

Tried Tarkov, not my thing at all.

 
khryzs said:
What's the outer barrel set up on this?

I'm looking at turning mine into a full 16" DMR and I really like the barrel you have used here.
Click to expand...
That’s the standard Mws barrel with the SPR (mk12) flash hider

itsme said:
Can anybody confirm that any outerbarrel wil fit the MWS or do i need to look for something in particular, ive seen the post on one of the first pages from @Wo1f where he states that the dytac has a wider "lip" so aftermarket rails will fit without pts ring. I'm looking for a 7 or 8" barrel/rail.

will any brand do or does it have to be a dytac? I really want a heat treated outer barrel, any tips? ?
Click to expand...
Any Mws spec barrel will fit, but the Dytac I know has the wider lip to fit aftermarket barrel nuts for rails. There are others with wider lips like the model works outer barrels, but I’m not sure about the rest

 
Well looks like I’m off to collect a CQBR on Saturday so I’ll be joining the crew.

I’m going to need the valve tool for mws magazines if someone could link the correct one would be awesome.

I’ve got a 48hr milsim next weekend and was planning on using propane can someone post links to a propane adaptor and where you guys buy your propane from? 

 
Go for an Airsoft Innovations propane adapter, its plastic, but a very strong plastic and isn't as prone to freezing up compared to the metal versions, I found mine cheaper on Ebay but waited a while to get it.

Propane i get for around £9 to £10 from GoOutdoors with their discount card (£5 for one year). So it ends up being roughly the same price as a Green gas bottle but you get roughly 50% more gas per bottle.

For valve keys just google Tokyo Marui Valve key, can't even remember what brand mine was but I got it off ebay and it works perfectly for my TM pistol mags and the MWS magazines, you'll want one that has 3 different heads attached to it.

Edit: I think my key is an Element one.

 
Last edited:
UKCYukarin said:
Go for an Airsoft Innovations propane adapter, its plastic, but a very strong plastic and isn't as prone to freezing up compared to the metal versions, I found mine cheaper on Ebay but waited a while to get it.

Propane i get for around £9 to £10 from GoOutdoors with their discount card (£5 for one year). So it ends up being roughly the same price as a Green gas bottle but you get roughly 50% more gas per bottle.

For valve keys just google Tokyo Marui Valve key, can't even remember what brand mine was but I got it off ebay and it works perfectly for my TM pistol mags and the MWS magazines, you'll want one that has 3 different heads attached to it.

Edit: I think my key is an Element one.
Click to expand...


Thanks mate I’ll get those ordered up, I’m hoping to use the CQBR and my VFC M40A5 next weekend, so going to try and get my Rifleman kit sorted in time as I’ve already sorted the stuff for my sneaky sniper 

 
Stocks! I'm looking at fitting a Socom stock to my MWS. Has anyone tried this/ have an idea how to go about it?

 
Fissure said:
Some pics on the way, lower is pretty much done now, was somewhat of a hassle to fit the selector switch. Used the pin from an iron airsoft MWS ambi selector and grinded it to the same specs as the RS selector switch pin. Worked out great, some minor filing on the trigger guard was required to align the holes for the screws, nothing major though and not visible when mounted on the lower.

Now its "just" the rethreading on the buffer tube thread left :)

Some parts on the parts, the modifications on the selector pin and then the lower. 

Finally my MWS DMR build (semi locked high FPS), fielded for the first time this weekend and it sure did give the bolty snipers a run for their money xD

View attachment 46388

View attachment 46389

View attachment 46390

View attachment 46391

View attachment 46392

View attachment 46394

View attachment 46395
Click to expand...
can you name or link that stock?? sick build bro, good work

Guys, is it normal to not having any increase of FPS or jouls by changing the stock inner barrel 250 mm by the ORGA 6.05 410 mm, i was specting a lil bit of high fps or jouls due to the joulecreep but i literally had no change at all... i understand it should not be that much but not at all? i got like 20-30 fps when i upgraded the inner barrel of my VSR10 Sniper..... is it due to the bore of the barrel? should i get a 6.01 ?
thanks for the reply guys!

 
Hello

Finally, it is home :-D

First of all i want thank you guys for that great thread. I find here so much information and this was a reason, that I decided to buy MWS. I am completely excited about basic performance and manufacturing.

Offcourse I want to step up to some upgrades and here the point where i have some questions on you...

1. I am already purchased SixG SUPER NUB and Modify Tan but dont have some good 370/371mm barrel... Its stil ORGA number one? Dave from SixG talking about prometheus 370mm and NPAS.

2. What gas is optimal to use? I know that Wo1F use Propane and he is satisfied. What about MAPP? Isn´t too strong for MWS? Now I am using some green gas from Abbey (Vertex, Ultra). I dont want to damage my new love, but ofc want some good performance stuff.

3. Do you have some tip, where to buy magazines in Europe? Its nearly impossible find some shop with no "out of stock" label. I have only ONE mag... Same with RA-Tech NPAS. I find only Marui/WE NPAS (looks same but is not black). Is there some difference? Overall is hard to find any vital parts for MWS I think(orga barrel just in one french shop...)

I am sorry for that mybee silly questions. I am quite new in GBBR, still learning and this will be my first upgrade ever. Little bit scared but excited. And offcourse sorry for my english I am from Czech republic and dont use it for a long time.

Thank you so much!

LEGXGPF

View attachment 46678

 
Last edited by a moderator:
LEGXGPF said:
Hello

Finally, it is home :-D

***snip***

Thank you so much!

LEGXGPF
Click to expand...


What are your limits on FPS? 

I believe it was Wolf who said he would only use MAPP below 5°c as propane is effectively the same as green gas and it cycles well on the propane above that temp. 

I have a gas sniper rifle which I have been using on red gas (slightly higher pressure than MAPP) until very recently, now I’m down using what I can assume is MAPP as it is the middle ground between green and red. 

If you go with the longer barrel and you’re using propane you will of course increase the muzzle energy (increase FPS and joules) the same with using a tighter bore.

in regard to magazines I have been looking around and the only places I can find magazines in Europe are very expensive, I am currently looking at MLEmart and other Asia based sellers and working out whether it will be cheaper. 

 
DopeYourScope said:
What are your limits on FPS? 

I believe it was Wolf who said he would only use MAPP below 5°c as propane is effectively the same as green gas and it cycles well on the propane above that temp. 

I have a gas sniper rifle which I have been using on red gas (slightly higher pressure than MAPP) until very recently, now I’m down using what I can assume is MAPP as it is the middle ground between green and red. 

If you go with the longer barrel and you’re using propane you will of course increase the muzzle energy (increase FPS and joules) the same with using a tighter bore.

in regard to magazines I have been looking around and the only places I can find magazines in Europe are very expensive, I am currently looking at MLEmart and other Asia based sellers and working out whether it will be cheaper. 
Click to expand...
Thank you for the quick reply. I have no limit on  FPS, cause I shooting in private sites on not living targets... not play airsoft games at all (Maybe in future... NPAS do potencial FPS reduction?)

If I will use propane I would like to care more about maintenance and lube inner parts. Is it right?

My idea is to make reliable accurate gun for longer range (not sniper ofc) I am newbie and for start want to change only Barrel, Nub and bucking... Maybe NPAS. I am glad for your advices.

In the reason that I have only one mag I didn´t make "green gas mag mod" yet... Is it necessary for my kind of upgrade? I will look for the mags in the Asia ?

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
717
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
363
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top