-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
View attachment 44308
Funny, one moment you think you might sell a gun, then you manage to get hold of the right suppressor for it and that changes... time for some scope rings, an optic and a paint job!
After that I'm going to swear a lot while I try and remove the rail, so that I can install a brass nub, and a longer inner barrel. I'm pretty sure it goes less than half way up the entire length of the gun from hop to the end of the suppressor.
Funny, one moment you think you might sell a gun, then you manage to get hold of the right suppressor for it and that changes... time for some scope rings, an optic and a paint job!
After that I'm going to swear a lot while I try and remove the rail, so that I can install a brass nub, and a longer inner barrel. I'm pretty sure it goes less than half way up the entire length of the gun from hop to the end of the suppressor.
Getting Ready for DMR build on MTR16, just ordered the SixG Nub from Dave, also ordered the ORGA LEX05 410mm barrel, but i have a question...
what Rubber should i go with? i have read and i think the Modify Tan is the go, i just want to confirm if is the best option
what you guys think?
will be posting photos of the Vanilla, and the advance of the build including externals!!
what Rubber should i go with? i have read and i think the Modify Tan is the go, i just want to confirm if is the best option
what you guys think?
will be posting photos of the Vanilla, and the advance of the build including externals!!
sonofsammo
Members
- Feb 3, 2018
- 1,448
- 439
Took my MWS in its HPA drum mag glory for the first time on Sunday - it's a beast and I beast I like very much.
BUT I loathe and detest the stock handguard. I find it really uncomfortable - so it's gone!
It's a shame the tan doesn't match - but that's what happens when America meets Germany..
I'm gonna just run a single point sling, so I don't have to sully the handguard.
View attachment 44438The fit is utterly solid and no PTS ring needed. I absolutely love it to bits.
BUT I loathe and detest the stock handguard. I find it really uncomfortable - so it's gone!
It's a shame the tan doesn't match - but that's what happens when America meets Germany..
I'm gonna just run a single point sling, so I don't have to sully the handguard.
View attachment 44438The fit is utterly solid and no PTS ring needed. I absolutely love it to bits.
G
Guest
Guest
For anyone that is looking for Modify Tan buckings in the UK. Longbow got stock of them a short while ago:
https://www.longbowbb.co.uk/product-page/modify-gbb-accurate-hop-up-bucking
https://www.longbowbb.co.uk/product-page/modify-gbb-accurate-hop-up-bucking
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
Real steel magpul pistol grip. Exterior build is nearly finished ?
Diesel May have had a paw in on it ?
View attachment 44503
View attachment 44504
Diesel May have had a paw in on it ?
View attachment 44503
View attachment 44504
F
_FIL_
Guest
Greetings all the way from Portugal.
Sorry if the english is not that good but as you can probably guess I´m Portuguese.
You guys deserve a standing ovation for the truly awesome work and amount of information this thread has and for that I salute and cheer you guys.
Got myself an MTR16 last week and only done a game so far with it, but already thinking about upgrading it internally.
Having said that I read all posts and almost made up my mind regarding the upgrades I want and only have a doubt on the inner barrel.
So far I am thinking on getting this:
I am limited to a maximum of 1.3J so I have to be careful with Joule creep and power output, that's why I think the NPAS is a good choice for me.
After reading the thread, I now plan to use heavier bb´s as well, starting from 0.25g(which are the ones I currently have around) up to 0.36/0.4(depending on the power output as said above) thus the nub and bucking.
The inner barrel is the real head ache here, don't really know which one to take and would appreciate any help you guys could give me.
I prioritize range over accuracy but if possible a good amount of both is always welcome, let me know if there can be any changes to the list to get the best out of it.
Thanks.
Sorry if the english is not that good but as you can probably guess I´m Portuguese.
You guys deserve a standing ovation for the truly awesome work and amount of information this thread has and for that I salute and cheer you guys.
Got myself an MTR16 last week and only done a game so far with it, but already thinking about upgrading it internally.
Having said that I read all posts and almost made up my mind regarding the upgrades I want and only have a doubt on the inner barrel.
So far I am thinking on getting this:
- modify Tan bucking
- sixg super nub
- NPAS valve
- tightbore inner barrel
ORGA 6.05mm 410mm
- or Prometheus EG 6.03/6.00 370mm
I am limited to a maximum of 1.3J so I have to be careful with Joule creep and power output, that's why I think the NPAS is a good choice for me.
After reading the thread, I now plan to use heavier bb´s as well, starting from 0.25g(which are the ones I currently have around) up to 0.36/0.4(depending on the power output as said above) thus the nub and bucking.
The inner barrel is the real head ache here, don't really know which one to take and would appreciate any help you guys could give me.
I prioritize range over accuracy but if possible a good amount of both is always welcome, let me know if there can be any changes to the list to get the best out of it.
Thanks.
Greetings all the way from Portugal.
Sorry if the english is not that good but as you can probably guess I´m Portuguese.
You guys deserve a standing ovation for the truly awesome work and amount of information this thread has and for that I salute and cheer you guys.
Got myself an MTR16 last week and only done a game so far with it, but already thinking about upgrading it internally.
Having said that I read all posts and almost made up my mind regarding the upgrades I want and only have a doubt on the inner barrel.
So far I am thinking on getting this:
modify Tan bucking
sixg super nub
NPAS valve
tightbore inner barrel
ORGA 6.05mm 410mm
or Prometheus EG 6.03/6.00 370mm
I am limited to a maximum of 1.3J so I have to be careful with Joule creep and power output, that's why I think the NPAS is a good choice for me.
After reading the thread, I now plan to use heavier bb´s as well, starting from 0.25g(which are the ones I currently have around) up to 0.36/0.4(depending on the power output as said above) thus the nub and bucking.
The inner barrel is the real head ache here, don't really know which one to take and would appreciate any help you guys could give me.
I prioritize range over accuracy but if possible a good amount of both is always welcome, let me know if there can be any changes to the list to get the best out of it.
Thanks.
Sorry if the english is not that good but as you can probably guess I´m Portuguese.
You guys deserve a standing ovation for the truly awesome work and amount of information this thread has and for that I salute and cheer you guys.
Got myself an MTR16 last week and only done a game so far with it, but already thinking about upgrading it internally.
Having said that I read all posts and almost made up my mind regarding the upgrades I want and only have a doubt on the inner barrel.
So far I am thinking on getting this:
modify Tan bucking
sixg super nub
NPAS valve
tightbore inner barrel
ORGA 6.05mm 410mm
or Prometheus EG 6.03/6.00 370mm
I am limited to a maximum of 1.3J so I have to be careful with Joule creep and power output, that's why I think the NPAS is a good choice for me.
After reading the thread, I now plan to use heavier bb´s as well, starting from 0.25g(which are the ones I currently have around) up to 0.36/0.4(depending on the power output as said above) thus the nub and bucking.
The inner barrel is the real head ache here, don't really know which one to take and would appreciate any help you guys could give me.
I prioritize range over accuracy but if possible a good amount of both is always welcome, let me know if there can be any changes to the list to get the best out of it.
Thanks.
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
And you deserve a standing ovation for your English (cos my Portuguese is non existent) and for actually reading the thread!
The 6.03 or 6.05 will both serve you well, the FPS variation over 40mm of barrel is negligible.
That said are you limited to 1.3J on 0.2g?
The 6.03 or 6.05 will both serve you well, the FPS variation over 40mm of barrel is negligible.
That said are you limited to 1.3J on 0.2g?
Thank you sir
Limit to 1.3J on any bb weight actually...That´s why I have to be very careful with the joule creep.
So you don't recommend the 6.00mm?
Last edited by a moderator:
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
I wouldn't advise using a 6.00
You need to keep a minimum 0.08 mm clearance between the barrel and BB.
Barrel diameter 6.03
- BB diameter 5.95
= clearance 0.08
Otherwise you have a much greater chance of the BB touching the barrel interfering with its spin, and much more chance of dirt blocking / damaging the barrel / BB
You need to keep a minimum 0.08 mm clearance between the barrel and BB.
Barrel diameter 6.03
- BB diameter 5.95
= clearance 0.08
Otherwise you have a much greater chance of the BB touching the barrel interfering with its spin, and much more chance of dirt blocking / damaging the barrel / BB
Similar threads
