THE TM MWS thread

[Sawyer]

The rail system, to be honest I think I'm just being a wuss and I'm afraid of breaking something... I need to give the nut a proper yank with the AR wrench. 

The only other annoying thing I've found so far is that my Z parts mk12 suppressor doesn't fit over the threads on the muzzle brake. I knew it might be the case, just a shame it is!

 

[Sawyer]

I'm going to double post here... Very happy with the finished product, although the gas tube wobbles because the supplied roll pin appears to be sized incorrectly... I'll work on that

View attachment 41983

 

[Wo1f]

That looks great. I had the same issue with a z parts suppressor on my VFC 

mk12 flash hider. I bought the VFC suppressor instead 

 

[Cipher-032]

Looks really nice! Different from the norm. I’ve decided to keep mine on stock rails til I work out my build. sopmod esk with a few tweaks. Have some updates tonight

 

[Immortal]

I really like the traditional fixed AR stock, far more than the adjustable ones.

 

[Immortal]

I've brained my damage reading all 23 pages however I've learnt a LOT! Thank you. ?

Curious, this little brass super nub as mentioned appears to be the same as the TNT TR hop nub that comes in the kit for the GHK AK hop. Good news is I have one in the drawer so my accidental first upgrade before I've even purchased the RIF. :lol: Next to look for a Tan modify bucking that's in stock. That'll do for now till I pop my cherry!

 

[Cipher-032]

Okay! So couple of goodies arrived today. These are not real steel. The sling plate was a okay fit. Doesn’t mesh up with the buffer tube very well unless I push on it while tightening the castle nut. Time will tell how it fairs in the strength department.

now the BAD lever. Jesus Christ I’m happy it was cheap. “Some fetlling to fit”. Had to use a different screw as the one supplied was about to round off. Then Dremmel a good chunk out of it for the bolt stop to even work. Then had to unwind the stock tube 2 turns for it to catch with the Marui mags. The P mags wouldn’t lock back with it on.

So a wasted adventure. I’ll try the Laylax one once I have better funds. 

In short. Don’t bother with the clone Magpul BAD lever. Get Laylax.

At least that’s a sling point ticked off my list

View attachment 42006

View attachment 42007

View attachment 42008

View attachment 42010

Apologise for the double post. But could some one crack their receiver in two and just tell me how many whole threads remain between the receiver and buffer tube please. Mine has two. Wanna make sure the tube is in the correct amount. Should of checked before hand...

View attachment 42011

 

[PopRocket123]

Okay! So couple of goodies arrived today. These are not real steel. The sling plate was a okay fit. Doesn’t mesh up with the buffer tube very well unless I push on it while tightening the castle nut. Time will tell how it fairs in the strength department.

now the BAD lever. Jesus Christ I’m happy it was cheap. “Some fetlling to fit”. Had to use a different screw as the one supplied was about to round off. Then Dremmel a good chunk out of it for the bolt stop to even work. Then had to unwind the stock tube 2 turns for it to catch with the Marui mags. The P mags wouldn’t lock back with it on.

So a wasted adventure. I’ll try the Laylax one once I have better funds. 

In short. Don’t bother with the clone Magpul BAD lever. Get Laylax.

At least that’s a sling point ticked off my list

View attachment 42006

View attachment 42007

View attachment 42008

View attachment 42010

I've heard and seen demonstrated we really bad things about the BAD lever. Basically it makes safe operation a nightmare as it becomes way too easy to accidentally drop the bolt and if the have your finger in the trigger guard it's a good way to get NDs

 

[Cipher-032]

I've heard and seen demonstrated we really bad things about the BAD lever. Basically it makes safe operation a nightmare as it becomes way too easy to accidentally drop the bolt and if the have your finger in the trigger guard it's a good way to get NDs

Real life or airsoft? Or both even?

 

[PopRocket123]

Real life or airsoft? Or both even?

RS 2 gun matches although I imagine a game would make these problems even more prominent

 

[Wo1f]

2 threads gap on the buffer tube is right. 

Regards to the bad lever... I don’t like the idea of them at all. In terms of the MWS, you’re adding weight to the bolt stop assembly. The ZET plate will have to lift that extra weight, which will effect bolt lock performance. Having bled profusely for hours after a Scar H bolt bit me, I don’t want any extra ‘help’ releasing the bolt when I don’t want it to. 

 

[Cipher-032]

Ill probably shelf the idea of the BAD lever and stick to the good ol' M4 slap/thumb. Thanks for getting back to me @Wo1f on buffer tube depth

 

[Immortal]

Ordered a couple of Tan buckings... jeez they're not cheap! One for the VSR and one for my soon to purchase MWS. :lol:

 

[Wo1f]

They aren’t cheap, are they ?  I’m thinking of trying a new hop combination with a custom nub very soon. Will report back how I get on. 

 

[Immortal]

No they're not. :lol: I added 3 to the basket and took one out in disgust....  :lol: :lol: :lol: :lol: :lol:

Like most things (generally) you get what you pay for. I've not heard a bad thing about them so I think it's money well spent.

I look forward to hearing what you come up with.

EDIT: I found them in stock at Skirmshop NL if anyone's interested....

 

[Immortal]

Cheapest I've found an MWS is £479 + delivery in the UK (brand new).

Any where that maybe cheaper (& reputable!)? I prefer brand new if possible unless mint...

 

[Guest]

Have you thought about Rainbow8 or Impulse101?

£479 sounds about right, you’re unlikely to get a discount on one in the UK

 

[Immortal]

Have you thought about Rainbow8 or Impulse101?

£479 sounds about right, you’re unlikely to get a discount on one in the UK

I haven't tbh however I'll check them out. Thank you for the info.

I'm Ok with the price I found. I just figured it was worth a shot incase there was a unicorn shop I'd not discovered within our lands. ?

EDIT: I tihnk the saving is minimal once everyone chucks their charges on (then again maths isn't my strong point) so I'll stick with a UK sourced one.

 

[Wo1f]

If you aren’t arsed about the quad rail, fire-support has an mws m4a1 for £459

 

[Immortal]

If you aren’t arsed about the quad rail, fire-support has an mws m4a1 for £459

Ah crap now I can't decide. I like them both :lol:

I think I may actually prefer the m4a1 but that puts me out MWS the club... looooool