THE TM MWS thread

[Katana]

Having some minor issues with the mags though. When I go to fill with green gas the magazine acts like it’s full and leaks all the gas back out, like it would with all other Marui magazines when full of gas. 

Grab a small packet of lees precision o-rings for fill valves. Super easy install, just shove em in around the fill valve and sorted. No pissing gas from the mags when filling and in my opinion, no need for the green gas mod either. 

 

[Wo1f]

*Excitement intensifies*

View attachment 39635

 

[clumpyedge]

Grab a small packet of lees precision o-rings for fill valves. Super easy install, just shove em in around the fill valve and sorted. No pissing gas from the mags when filling and in my opinion, no need for the green gas mod either. 

You can however over fill as I'd done the same with all my pistol mags and the hammer couldn't them compress the valve knocker. Not sure if the the same would happen with the MWS but something to be wary of.

 

[clumpyedge]

*Excitement intensifies*

View attachment 39635

What is it?!

 

[Wo1f]

What is it?!

That’s a G&P M16a2 recoil buffer with adjustable weight, G&P rifle length stock tube, G&P roller bearing BCG weight and a Dboys SPR front sight. 

 

[Davegolf]

The BCG weight looks like a great idea, I mean I'm not into 'weight' but loving the 3 way rollers,should be slick!

 

[Wo1f]

The BCG weight looks like a great idea, I mean I'm not into 'weight' but loving the 3 way rollers,should be slick!

I say ‘weight’ purely because I couldn’t think of a better name. It’s surprisingly light. Just rolling it in and out of the tube is buttery smooth. The A2 buffer is very light too.

 

[Davegolf]

Yeh I realised my comment was retarded as it's clearly anodised aluminium so nice and light! 

 

[Wo1f]

Modelworks barrel, VFC mk13 muzzle brake and Dboys spr sight. For whatever reason, the spr sight came with a carbine length gas tube ?

View attachment 39724

 

[Wo1f]

View attachment 39842

 

[sonofsammo]

Bucking question - Getting hold of a modify tan is proving near impossible.

So what's the next best, aside from the original TM bucking?

 

[Davegolf]

Just stick to a healthy TM bucking

 

[Wo1f]

Standard or Prometheus purple. I believe they’re both the same shape, standard mound as the modify 

 

[Dentonboy]

So, I tried some 0.28s last Sunday as I found it hard to get consistent range or HOP with 0.23s and 0.25s.

Well, considering I am still using stock internals, with GunFire's excellent Smart Gas, I was reaching out to 55m+ with a nice flat trajectory.

Definitely advise heavier BBs, as has been mentioned before in the thread by others.

 

[Guest]

I tried an MWS with 0.36’s, a tightbore, Modify tan rubber and brass nub, reaches 80m ?

 

[MisterG]

If only they ran with higher capacity mags I would be really tempted to get one.

 

[Guest]

If only they ran with higher capacity mags I would be really tempted to get one.

Unfortunately, gas mags just don’t come in mid or hi-cap.

You’d need to run HPA with a drum or box mag.....

 

[Wo1f]

You don’t need high caps when you have massive range and accuracy advantages ?

 

[j_brujah]

I know I'm still a noob and it depends on the play style but for the love of god I don't understand this capacity anxiety . I have 4 mags right now, 1 in the gun and 3 spares and at both games I was, with each lasting well over 5 hours, I barely went over 2 ... I saw/heard ppl shooting like crazy but usually, in direct confrontation, all that shooting just helped me spot them, while they were spraying the leaves around me. It's true that I also have a side arm (3 mags total with 26 rounds each) but still ... probably personal reference and all 

 

[Bolton.Zippy]

Hi guys awsome info ordered the cqbr block 1 for cqb and leaving internals standard.. max 350 fps will be using .28s then next year getting the mtr16 to use as dmr can't wait for these guns ? have been using tm 416c standard and a tm high capa 4.3 with lots of upgrade goodies shoots 320 fps like a champ.. thanks for all info you guys give out ?

Hi guys awsome info ordered the cqbr block 1 for cqb and leaving internals standard.. max 350 fps will be using .28s then next year getting the mtr16 to use as dmr can't wait for these guns ? have been using tm 416c standard and a tm high capa 4.3 with lots of upgrade goodies shoots 320 fps like a champ.. thanks for all info you guys give out ?

416c is shock recoil buy the way.. any advise on best classified to sell guns ? thanks