THE TM MWS thread

[clumpyedge]

Hey Guys,

I've read through this post and have to say it's great.

One thing I'm curious about and I'll apologise if it's here and I''ve just missed it, but I was wondering where I could get the correct barrel nut needed to fit an aftermarket rail in the UK? Also will the Nuprol series rail fit. I'm aiming to get a 9.5" Mk18 style rail to go with the CQB-r outer.

So far I've just swapped the barrel for a 260mm crazy jet, omega nub and TNT 50 degree TR hop. At 350 fps the thing slings 36's out to 60m like nobodies business!

Cheers in advance

I believe this may be what you are after, not sure if itll work with the nuprol rail but you could look at the orga one etc

https://www.fire-support.co.uk/product/pts-adapter-ring-for-marui-m4-mws-gbb

Important information:

The inner barrel is 250mm on the 10.5 " CQBR and the 14.5" carbine, meaning on the 14.5" outer you can fit a much longer 370mm inner barrel. The Hop up adjustment dial is similar to Tm pistols and can be located inside the upper receiver by locking the bolt back and looking down the magwell. Due to the way the outer barrel is cut, it's not possible to fit an aftermarket rail onto the gun without one of two things. A barrel adapter ring (PTS, ORGA and a couple of others make them and usually cost £10) or A dytac outer barrel, which has a wider lip, as shown below. Dytac on the left

@Hef Legend @Hef Legend

 

[clumpyedge]

View attachment 37614View attachment 37615

Choices!

 

[Wo1f]

I absolutely love that rail. Too expensive for me though 

 

[clumpyedge]

I absolutely love that rail. Too expensive for me though 

Its a beast, feels like the heaviest bit of the build is the mags ? I'm lucky my mate (mule) from America brings back stuff for me for the handsome courier cost of BBQ meat!

 

[Hef Legend]

So this TM is pissing me off already lol

Bought the PTS ring as advised and a Nuprol Bocca2 rail.

Issues, the GGB ring for the nuprol rail doesn't thread all the way on and the PTS ring doesn't fit inside the Nuprol barrel nut, not that it matters as it doesnt fit anyway! GRRRRR

£60 wasted right there

Any had any success with the Nuprol rail if so, what wizardy was involved?

 

[jcheeseright]

The problem you’ve got there is.... NUPROL! 

The problem you’ve got there is.... NUPROL! 

 

[Guest]

I hate the suppressor, but don’t have a short inner barrel I can use at the moment.

Otherwise I’m happy with it

 

[Wo1f]

I’m not sure if I absolutely love that or I hate it. It’s genuinely bothering me that I don’t know how I feel ?

 

[Guest]

I’m not sure if I absolutely love that or I hate it. It’s genuinely bothering me that I don’t know how I feel ?

I think I’m going to go for a silencer inside the rail, and I have a couple of Iron Airsoft poly mags coming, hopefully that will sort it out ?

It is very light though, even with a mag in it it’s an easy carry.

 

[sonofsammo]

It is very light though, even with a mag in it it’s an easy carry.

Light is good...... But how far do you carry it?

???

 

[Guest]

Light is good...... But how far do you carry it?

???

Up and down the garden ???

 

[sonofsammo]

Up and down the garden ???

Like a teddy bear? 
One step
Two step
Shooty under there!

 

[Guest]

Like a teddy bear? 
One step
Two step
Shooty under there!

I may have slightly less hair than your average teddy bear, but otherwise, yeah, pretty much ??

 

[E21A]

I’m not sure if I absolutely love that or I hate it. It’s genuinely bothering me that I don’t know how I feel ?

I’m with you on that one 

 

[Guest]

A better pic of my HERA kit

 

[mogaly674]

I've got to say I like it and it's giving me ideas for my MWS 

 

[Wo1f]

That’s actually awesome

 

[Guest]

That’s actually awesome

Cheers bud. I have a different red dot coming, and an internal silencer, but it won’t look much different??

 

[Wo1f]

Cheers bud. I have a different red dot coming, and an internal silencer, but it won’t look much different??

What dot? I love the srs

 

[Guest]

What dot? I love the srs

View attachment 37789