Y
Yukarin
Guest
Nope. Need one specifically for Marui GBBR. The normal RA-TECH NPAS is for WE GBBR and TM pistols.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
damster117
Members
- Mar 1, 2019
- 11
- 4
Y
Yukarin
Guest
Wiitech do a blank m16a1 lower but not the upper. May require getting an M16A1 upper custom made somewhere.
EvilMonkee
Members
- Feb 17, 2014
- 2,346
- 1,328
Not worth the expense or effort then. Guess its back to Plan A of a WE GBBR M16A1
- Thread starter
- #1,526
EvilMonkee
Members
- Feb 17, 2014
- 2,346
- 1,328
Think so. Found a place doing uppers and lowers
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Lots of variables but the difference can be upto double the amount of shots depending on how much tube you cut off, how fast you spam the trigger or full auto.
As above it is most definitely worth doing, it's a mod that you're stupid if you don't do it really.
Just halve the length of the tube, don't fully remove it.
As above it is most definitely worth doing, it's a mod that you're stupid if you don't do it really.
Just halve the length of the tube, don't fully remove it.
Boristhedriver
Members
- Jun 15, 2019
- 27
- 12
very clean looking m4! love it!
Yesterday my rail came in so my friend at Repairsoft helped me out with the install.
I went with the Madbull noveske NSR 7" freefloat rail. We went to try the PTS ring and the rail but it left too much space between the reciever and the rail. the ring was needed though but it didn't fit the barrel nut, it got stuck in there actually. Jeff milled the smallest ring so it would fit all the way into the barrel nut. This also fixed the space between the reciever and the handrail.
View attachment 47399
With the handrail in place it was time to get the barrels to length.
I didn't get a new barrel and wanted to cut the original down. After putting it in the milling machine we saw that the outer barrel was conical which was a bit of a problem but we managed to get the job done pretty quickly.
Then we cut off the inner barrel so it stuck out a little further than the outer barrel so it would be just in front of the LED in my tracer.
View attachment 47398
After that the outer barrel needed just a little bit of paint and the job was done.
Loving this CQB build, looking forward playing with it in the near future.
Only thing i'm looking for now is a real steel skeletonized pistol grip.
Also i would like my vortex +- 1 inch higher without making it too bulky, minimalism is key imo. if anyone has an idea for that please let me know!
Hope you guys enjoy the build aswel.
View attachment 47397
I went with the Madbull noveske NSR 7" freefloat rail. We went to try the PTS ring and the rail but it left too much space between the reciever and the rail. the ring was needed though but it didn't fit the barrel nut, it got stuck in there actually. Jeff milled the smallest ring so it would fit all the way into the barrel nut. This also fixed the space between the reciever and the handrail.
View attachment 47399
With the handrail in place it was time to get the barrels to length.
I didn't get a new barrel and wanted to cut the original down. After putting it in the milling machine we saw that the outer barrel was conical which was a bit of a problem but we managed to get the job done pretty quickly.
Then we cut off the inner barrel so it stuck out a little further than the outer barrel so it would be just in front of the LED in my tracer.
View attachment 47398
After that the outer barrel needed just a little bit of paint and the job was done.
Loving this CQB build, looking forward playing with it in the near future.
Only thing i'm looking for now is a real steel skeletonized pistol grip.
Also i would like my vortex +- 1 inch higher without making it too bulky, minimalism is key imo. if anyone has an idea for that please let me know!
Hope you guys enjoy the build aswel.
View attachment 47397
Now that is a beaut of a rail!Yesterday my rail came in so my friend at Repairsoft helped me out with the install.
I went with the Madbull noveske NSR 7" freefloat rail. We went to try the PTS ring and the rail but it left too much space between the reciever and the rail. the ring was needed though but it didn't fit the barrel nut, it got stuck in there actually. Jeff milled the smallest ring so it would fit all the way into the barrel nut. This also fixed the space between the reciever and the handrail.
View attachment 47399
With the handrail in place it was time to get the barrels to length.
I didn't get a new barrel and wanted to cut the original down. After putting it in the milling machine we saw that the outer barrel was conical which was a bit of a problem but we managed to get the job done pretty quickly.
Then we cut off the inner barrel so it stuck out a little further than the outer barrel so it would be just in front of the LED in my tracer.
View attachment 47398
After that the outer barrel needed just a little bit of paint and the job was done.
Loving this CQB build, looking forward playing with it in the near future.
Only thing i'm looking for now is a real steel skeletonized pistol grip.
Also i would like my vortex +- 1 inch higher without making it too bulky, minimalism is key imo. if anyone has an idea for that please let me know!
Hope you guys enjoy the build aswel.
View attachment 47397
Would that be a vortex crossfire red dot? I'm really thinking of pulling the trigger on one!
It was love at first sight ?
It is indeed a vortex crossfire, its a lovely reddot. i have it for about a year and it never lost zero on my rk74, i only have 2 games with my mws but its holding zero for sure (if it does for RS it should def for airsoft.) i like the fact that if you would have irons you can still use them as the mount is skeletonized. I would pick that one anyday as it looks clean and has functionality to it. (ive seen crossfires with another mount aswel but i liked this one better.) All this with a lifetime guarantee made me pull the trigger on getting one.
i should start a store ?
The reddot is super clean, i ran fakes before but they don't come close to the real thing. Only thing i want to find is a higher mount as i play with a dye mask and i have to tilt my head now a little bit. For me the strikefire is a bit too big. i like to keep my build and loadout as minimalistic/funtional as pissible as i play only cqb and i want to be fast.
My friend ordered the rail from wholsesale supplier for me. i know you can get it from www.airsoftshop.be aswel.
Last edited by a moderator:
When it comes to red dots.. something to bare in mind. If you have an astigmatism in your eye(s), you will never see a clean dot. One of my friends didn't realise that he had one and just assumed all red dots were a little blurry. 100% recommend the Vortex Optics though - they are worth every penny.
I'm the same mate light and simple is the way to go, I plan on doing alot of practical rifle drills , 2 gun, ipsc but who doesn't like a shootout! ? The strikefire is quite large but it was the look that got me but I think I'll order a crossfire tonight as it's payday! ?
- Thread starter
- #1,540
mine's not arrived yet but ive ordered the vortex too. Worth it all day long in my opinion. never loose zero because it's real steel and the warranty is fantastic. Why sped £50 on an airsoft replica that'll either break or get shot out. I can shoot out a vortex and they'll just give me a new one, no questions asked.
Similar threads
