Cyberlawyer
Members
- Jan 1, 2020
- 340
- 79
yes, the 416c kit is calling me. Not only is it a barrel length I don’t have, but the kit is so complete that it shouldn’t be too hard to complete using all aftermarket parts.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Sadly due to the pandemic they won’t be shipping to us just yet... but yeah their kit is really polished and spot on. A few of my PTW friends have the kits for their riffles and they are outstanding. Mind you so is the price tag!
Roll on that lotto win!
Cyberlawyer
Members
- Jan 1, 2020
- 340
- 79
A lot of airsofters overlook rifle ergonomics in favour of more FPS or fancy sights when it’s an area where small changes can make a huge difference to your shooting.
One of the big reasons all my GBB rifle builds use the same grip. I have found an angle that works for me so I use it all the time, nothing speeds target acquisition than having a rifle that naturally points where you are looking.
One of the big reasons all my GBB rifle builds use the same grip. I have found an angle that works for me so I use it all the time, nothing speeds target acquisition than having a rifle that naturally points where you are looking.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Magpul stuff is just designed to work.... it does what it says on the tin... unless its a Chinese fake! Rifle ergonomics is important and it certainly helps with the game.. I've put on the Magpul MOE K grip on my rifle and it feels so superior to the Marui grip from a build quality... however, the Marui grip has a finger rest which I prefer and kinda makes it more comfortable than the Magpul grip coz my delicate fingers are rubbing against the Marui metal trigger guard! So to fix that wee issue the tigger guard is being replaced by a Magpul trigger guard which looks better and certainly has better ergonomics so which will make my rifle look better which in turn will make me play better (who am I kidding lol) and that's good for everyone 
Oh I know exactly what you mean about the trigger guard rubbing. It's horrible. What Magpul trigger guard are you going to use and any mods required?Magpul stuff is just designed to work.... it does what it says on the tin... unless its a Chinese fake! Rifle ergonomics is important and it certainly helps with the game.. I've put on the Magpul MOE K grip on my rifle and it feels so superior to the Marui grip from a build quality... however, the Marui grip has a finger rest which I prefer and kinda makes it more comfortable than the Magpul grip coz my delicate fingers are rubbing against the Marui metal trigger guard! So to fix that wee issue the tigger guard is being replaced by a Magpul trigger guard which looks better and certainly has better ergonomics so which will make my rifle look better which in turn will make me play better (who am I kidding lol) and that's good for everyone
quango2k
Members
- Jul 20, 2020
- 293
- 74
The angrygun one is a good replica and fits without modding.
So the SL stock arrived. Marginally longer than the older models. Might get a K aswell to see how tight to the buffer..if it wobbles, its out.
View attachment 68687
View attachment 68688
PRIMEAirsoftTech
Members
- Sep 24, 2020
- 5
- 3
Hello all.
I decided to upgrade my MWS SOPMOD to fire 0.32g BBs at 1.1 J. Using a 370 mm long 6.03 mm tightbore Prometheus inner barrel, stock hop rubber, and Prometheus CNC Hop arm (rather than the SixG Nub, for which I got no email reply), I got 285 fps on a 0.32g, so just a little hot.
I installed the AngryGun MPA Ver 2 Nozzle, and identified many problems. The return spring was too strong, the C clip spring was dysfunctional, and the overall nozzle and BB loading knob (you know, the part of the nozzle that picks BBs up from the mag) lengths were too long. I fitted the nozzle with a Dynamic Precision spring set and the stock buffer sealer and had no problems... until I tried full auto. I got misfeeds, double feeds, and horrible consistency.
The stock nozzle setup fed fine, but ran too hot. So, I sanded down the AngryGun MPA Valve so it was narrow enough to fit into the stock nozzle, and sanded the three outer sides of the polymer end of the nozzle return spring flat so that the screw holes aligned with the stock nozzle.
I now have a reliably feeding stock nozzle that has an adjustable (and very consistent!) FPS, along with a spare nozzle that works fine on semi auto.
I would have liked to have paid less and just got a decent NPAS (the RA Tech WE NPAS didn't work for me) but hopefully this knowledge helps somebody else.
Can post pictures of the work if anybody is interested.
I decided to upgrade my MWS SOPMOD to fire 0.32g BBs at 1.1 J. Using a 370 mm long 6.03 mm tightbore Prometheus inner barrel, stock hop rubber, and Prometheus CNC Hop arm (rather than the SixG Nub, for which I got no email reply), I got 285 fps on a 0.32g, so just a little hot.
I installed the AngryGun MPA Ver 2 Nozzle, and identified many problems. The return spring was too strong, the C clip spring was dysfunctional, and the overall nozzle and BB loading knob (you know, the part of the nozzle that picks BBs up from the mag) lengths were too long. I fitted the nozzle with a Dynamic Precision spring set and the stock buffer sealer and had no problems... until I tried full auto. I got misfeeds, double feeds, and horrible consistency.
The stock nozzle setup fed fine, but ran too hot. So, I sanded down the AngryGun MPA Valve so it was narrow enough to fit into the stock nozzle, and sanded the three outer sides of the polymer end of the nozzle return spring flat so that the screw holes aligned with the stock nozzle.
I now have a reliably feeding stock nozzle that has an adjustable (and very consistent!) FPS, along with a spare nozzle that works fine on semi auto.
I would have liked to have paid less and just got a decent NPAS (the RA Tech WE NPAS didn't work for me) but hopefully this knowledge helps somebody else.
Can post pictures of the work if anybody is interested.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
The colour of that New SL looks lighter than the other two. Mind you it’s new I suppose and that accounts for the lack of grime and goodness knows what else that CTR has been through ?
it’s actually growing on me truth me told. Having these three together puts the Magpul designs into perspective. Suddenly the CTR looks a little dated! Shock horror.
He says the WE one (silver) which with out some sanding is too large a diameter to work in a TM nozzle. The black TM one is a drop-in fit. I posted a loooong post on this a while back (last summer) where I tested various bolts, nozzles and NPAS for consistency.
quango2k
Members
- Jul 20, 2020
- 293
- 74
Interested.
I had the same problems with the angry gun v2 nozzle. In fact, I have had problems with almost everything I have bought from angry gun. I am convinced they do zero testing on any parts.
They are very close in colour, its more the lighting in my spare room. My original ctr is also covered in krylon
Yeah I thought the WE one might be the silver one and thought that would be his problem.
Cyberlawyer
Members
- Jan 1, 2020
- 340
- 79
The stock inner barrel is pretty good. The main reason to change is to go longer or tight bore (or both) to get more FPS.
Note that some lesser quality tight bore barrels may bump FPS but at the cost of accuracy if the finish to the inner bore isn’t very uniform.
Note that some lesser quality tight bore barrels may bump FPS but at the cost of accuracy if the finish to the inner bore isn’t very uniform.
PRIMEAirsoftTech
Members
- Sep 24, 2020
- 5
- 3
The WE one? The silver one. I was told on Reddit it was a drop in fit... even after sanding it down to fit I was told it would be fine if it rotated inside the nozzle. It wasn't - terrible consistency!
Haha, well perhaps it wouldn't be so bad if the nozzle internals were compatible with the stock nozzle. I can try to get pictures together next week.
Yep, the silver one. I was told the black one was identical to the WE silver one ? don't believe everything you read on the internet!
I picked up the MWS 370 mm Prometheus 6.03 mm inner barrel for the FPS bump. I got 285 fps on a 0.32g BB with it on green gas. Accuracy wise, I got no significant improvement using the stock hop rubber at 100 ft, but can't test beyond 100 ft due to lockdown. Now that I'm able to use heavy BBs at decent power, I'm expecting to have better accuracy at range. Bore quality and consistency looked very good. The stock barrel is very good, so you have to decide whether its good value for you to upgrade, and keep your expectations in check.
Hi guys,
I just installed the G&P 3,5 Nozzle valve and I messed it up with the plastic screw, and I lost it, Does anybody know the screw dimensions? I would like to buy a replacement without having to buy a complete new valve.
thank you so much
I just installed the G&P 3,5 Nozzle valve and I messed it up with the plastic screw, and I lost it, Does anybody know the screw dimensions? I would like to buy a replacement without having to buy a complete new valve.
thank you so much
Last edited by a moderator:
Measure the hole it fell out of and round up to the next whole number (Eg if it is a 3.4mm hole = M4 grub screw) ? Buy a bag of the correct sized ones from Ebay and pop a blob of thread lock on before fitting ?
Similar threads
