THE TM MWS thread

[Davegolf]

To tighten groupings;

A HSB spacer will tighten up FPS (and therefore shot accuracy) consistency.

Bucking clean and dry, all seals good, nozzle and nozzle spring healthy.

Mag gas exits in good condition.

All that will also alter FPS consistency.

To increase range and tighten groupings;

If you're nearing 330 FPS or more 0.36s will fly nicely.

Higher FPS with heavier ammo again.

Otherwise your looking at a higher quality barrel and Rhop

 

[jsmithski]

I cut a buffer tube spacer from a 3/16 inch 70D Sorbothane to reduce the shock. To prevent it from getting ripped I’ve added a very thin shim on top of it. Seems to be a good shock/vibration absorbent.

 

[Whisky1]

I really like the x range rubbers, but they do wear quite quickly, I've been running one for a few months and have another on order as I've noticed considerable wear.

Modify x range, is it worth a go? I’’ve always used the modify tan with the Daves nub but found that they are just ripping too quickly. What degree is everyone using too? Using .32’s but could go heavier. 

Thanks in advance and hope your all keeping safe and fettling with those MWS’s 

 

[Smiller]

Cheers fella. I think as @Davegolf says stick with the tm. I might try bed the modify accurate in a little more and see if the burrs around the opening Come away ( i know I’m dreaming lol).

So with the lockdown, I've been drilling alot. At first i found the mws trigger to be okay, but after a year of shooting I'm now ready for an upgrade. Does anyone have a review on any triggers? I like the look of the g&p adjustable but thats alot of cash for something that has very little information out about it.

My misses decided to record me on the sly so thought I'd share. ?? 

View attachment 56087

Have you seen this? If you can figure out what he’s done please be kind enough to share ?

https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=2ahUKEwihp7D9mOvoAhVllFwKHYCeAVkQwqsBMAF6BAgKEAc&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D6on9Cys31Dw&usg=AOvVaw0SxPaOO2KxS-QagBInOwRF

 

[Davegolf]

Oh yeh this is old, he's showing where he's filed part of the trigger mech for a less stiff / notchy pull and reset.

I made a very nice drop in replacement trigger bar that made the trigger lovely with a dream reset, but I couldn't make it cheaply enough yet for you guys. one day!

Be great to do a Happy Meal style 'tune your MWS' goody box eventually!

I need to get another personal MWS, it's just not right without one ?

 

[Kazuya991]

Anyone willing to part with a Pmag? Willing to pay £75 for a gas tight one

 

[Smiller]

Oh yeh this is old, he's showing where he's filed part of the trigger mech for a less stiff / notchy pull and reset.

I made a very nice drop in replacement trigger bar that made the trigger lovely with a dream reset, but I couldn't make it cheaply enough yet for you guys. one day!

Be great to do a Happy Meal style 'tune your MWS' goody box eventually!

I need to get another personal MWS, it's just not right without one ?

Come on fella, pull your finger out ?, out of interest how much was the replacement trigger kit? Are you still offering your servicing on the MWS too fella?

 

[Maligator]

Okay, so im totally new to airsoft, not done a single skirmish or used any airsoft rifles but ive finally made my mind up and decided even with all the extra expense and issues of a GBBR i want a TM M4. 

Im thinking CQBR but is there much difference in accuracy and range between the 10 inch and 14inch barrels? 

What do I need from the off to get me up and running, cant really afford to do any mods and going to have to start of with maybe only 2 or 3 mags until i can afford more. 

 

[Davegolf]

Issues of a GBBR!?!!

There is no difference in accuracy between the two, in actual fact the inner barrel is 250mm 10" on both variants.

Pick whichever floats your boat.

Food for thought later down the line; a 10" and a suppressor makes for a quiet gun.

All you need is;

Nuprol gas or propane and an adapter.

Some decent BBs, Devil blaster or Geoff's if your flush lol in 0.28g

A genuine TM speed loader, 2-3 mags is fine.

They are the best gun OOTB period.

 

[Maligator]

Cracking, cheers for that. Need to find one now. 

A TM M4 and umerex glock will be my ideal load out 

 

[Kazuya991]

So with the lockdown, I've been drilling alot. At first i found the mws trigger to be okay, but after a year of shooting I'm now ready for an upgrade. Does anyone have a review on any triggers? I like the look of the g&p adjustable but thats alot of cash for something that has very little information out about it.

My misses decided to record me on the sly so thought I'd share. ?? 

View attachment 56087

What "plink" sounding metal targets do you have? And where can you get them? Online they're all so expensive for what is essentially a sheet of metal lol

 

[Wild Weasel]

What "plink" sounding metal targets do you have? And where can you get them? Online they're all so expensive for what is essentially a sheet of metal lol

If you are after  cheap metal targets for shooting 'steel', I use a plasterers hawk from the range (the shop, not a range), along with pans sprayed white also from there to simulate torso/head sized targets fitted to 1 3/4" plastic waste pipe drilled and bolted on. These give a satisfying hit noise easily heard over distance and are dirt cheap.

Have you stripped the valve?

it be crudded up or the O ring swollen / ripped / jammed

 I found the problem, the refillable flame king bottle I bought that was going to save me a fortune does not work with A.I. or madbull fill adapters causing the mag to only fill a bit then leaking either side of the nozzle ???

So unless I can make / find some sort of adapter that's best part of £100 down the crapper. Problem is the inside of the bottle valve, Coleman - chamfered, Flame king flat bottomed.

Looked at plumbers gas torch extension as a source of connecters to adapt it to Coleman - spec but hoses have no valve in the end of those!

Lathe operaters /welders anybody able to source a cga 600 male/female weld 'em/bolt them together for me to adapt my bottle valve please?

View attachment 56172

 

[adas1223]

i have the A.I. steel tip and polymer tip. the steel tip LEAKS. the polymer is silent. imagine that... i also have a brass tip which doesnt leak.. It might be that white gasket on the bottles, check out the inner diameter...

 

[Wild Weasel]

i have the A.I. steel tip and polymer tip. the steel tip LEAKS. the polymer is silent. imagine that... i also have a brass tip which doesnt leak.. It might be that white gasket on the bottles, check out the inner diameter...

Cheers, yep, checked that, there's a gauge on the side of the nozzles for that.

 

[Wo1f]

What have I missed?

 

[Davegolf]

oooh nothing much, you know propane adapter this, hop rubber that ?

You still got that CASV?

 

[Wo1f]

oooh nothing much, you know propane adapter this, hop rubber that ?

You still got that CASV?

Sold it to my mate and regretted it immediately. He takes good care of it though. 

 

[Davegolf]

At least you know where it is ?

 

[Smiller]

don’t forgot the request for your trigger mod @Davegolf 

 

[Davegolf]

Hi @Smiller apologies, yes I am looking into mass production of them, just difficult at this time.

I do still offer MWS servicing etc.