THE TM MWS thread

[Buster]

2nd outing today with the MWS and my Tm speed loader XL type decided to fall apart. Does anyone recommend a good quality speed loader which loads with no hassle.

 

[Pete9]

2nd outing today with the MWS and my Tm speed loader XL type decided to fall apart. Does anyone recommend a good quality speed loader which loads with no hassle.

I’ve been using the smaller marui loader with success. It’s been the most reliable on the Marui mags. I have 3 Prowin mags, and several different speedloaders work pretty well with them. The Marui mags are more temperamental. Here’s a link to the Marui loader I’m talking about.

 

[Uncle Pauly]

Here’s a link to the Marui loader I’m talking about.

Ditto. That's the one I use too. It's a trusty little fecker and hasn't let me down yet ?

 

[Davegolf]

@Cipher-032 I've used the Dynamic Precision one before without any issues.

Not intentionally, it came with one other the many MWS ive bought.

The standard TM seal does great, whatever you use keep all your BCG seals lubed up with silicone grease ?

View attachment 53950

Also RE nozzle return springs, I think the life of the springs is affected heavily by these factors;

1. Hop bucking used; some hop rubbers grip the nozzle to tightly putting excess stress on the spring being held fully extended for longer with each shot cycle

2. High power gas relative to ambient temp causing the spring to be extended to full length extremely quickly.

 

[KingZi]

Hi Everyone,

I just got done assembling my SAI kit for my Marui MWS. I have a problem with the outer barrel. My Son hammered it in and jammed the threads. Is there any way to fix this problem? Also, I need some advice on the whole barrel nut installation and how to use the spacers.

I appreciate your help.

 

[MILITATED]

Any suggestions or tricks on how to get this bloody thing off the MTR 16? Got the first 2 bits off but this 3rd bit must be married to the barrel threads.  Been trying for ages but don't think it has moved one bit. Tried heating it but to no avail 

View attachment 53962

 

[Davegolf]

More heat, reciever in vice, very sturdy spanner.

Youll want to remove the ejection port cover so as to reduce chance of damaging it with heat, or marking it in the vice.

 

[the3rdlegion]

So here are my 2x MWS builds so far (sorry about upside down picture): 

Top one is a 13.5" build with Geissele rail, Angrygun bolt carrier Magpul CTR stock, Strike Industries handguard, PRI compensator, Magpul MOE+ grip, Magpul BAD, GM extended mag release button, Trijicon 1-8x26 Accupower LPVO with Geissele super precision mount, and offset Trijicon RM06. I can give an internal parts list too if desired. This thing is a beast, hops .43s at 2.35J consistently, basically using it as a DMR because it's laser accurate and can outrange most field sniper rifles. The LPVO really helps with sniping, and I use the RMR for extremely close engagements where the hop up wouldn't matter.

The bottom one is a RWA B.A.D. 7" SBR build (still in progress). Has a BCM bolt carrier by angry gun, EOTech EXPS2-0-GRN, will swap the handguard to a real steel BCM MCMR handguard because the Fortis one is mega-dumb (M-Lok on the sides, 2 tiny keymod slots on the bottom). This thing is very lightweight, and performs superbly in CQB to midrange. Still a work in progress though, as it has some kinks to be ironed out. Likely will switch to a Trijicon MRO with a 1/3rd co-witness mount too.

Lemme know what you guys think!

 

[the3rdlegion]

Here are my two MWS builds so far:

Right one is a 13.5" build with a Trijicon 1-8x26 Accupower mounted with Geissele Super Precision mount, and Trijicon RM06 on a canted mount (I only use the RMR at really close distances where the hop up doesn't matter). This thing hops .43s at 2.35J and is an absolute monster. I out-range most sniper rifles at the field, and the gun is laser precise. 

Left one is a 7" B.A.D. build, with an EOTech EXPS2-0-GRN. Working on switching the handguard to a real steel BCM MCMR to match the BCM bolt carrier, as the Fortis rail is omega-dumb (M-LOK on the sides, keymod on the bottom, why?). All gunsmodify internals, but I'm still hammering out some of the kinks with the gun. This thing performs superbly in CQB to midrange.

Let me know what you guys think!

 

[Cyberlawyer]

I’m just about to start on doing a MK12 DMR upper for my MWS Having and I’m interested to hear peoples views on what inner barrels I should be considering. I’m aiming to get in the 450 FPS range with the gun locked to semi.
 

At the moment my choices seem to be between (1) a 410mm long ORGA Lex 6.05mm barrel or (2) a 370mm long Prometheus 6.03mm barrel. Anyone had any experience with either? Which one will give me the best accuracy and FPS boost? I have the 250mm Prometheus in my current MK18 build and in that context it has been really good.

I can also see that G&P do a 6.03, 410mm barrel, anyone used one or have any thoughts?

I already have an npas on order and will be reaching out to buy a new brass nub tomorrow.

Thanks in advance for any opinions.

 

[Festerfly]

I’m just about to start on doing a MK12 DMR upper for my MWS Having and I’m interested to hear peoples views on what inner barrels I should be considering. I’m aiming to get in the 450 FPS range with the gun locked to semi.
 

At the moment my choices seem to be between (1) a 410mm long ORGA Lex 6.05mm barrel or (2) a 370mm long Prometheus 6.03mm barrel. Anyone had any experience with either? Which one will give me the best accuracy and FPS boost? I have the 250mm Prometheus in my current MK18 build and in that context it has been really good.

I can also see that G&P do a 6.03, 410mm barrel, anyone used one or have any thoughts?

I already have an npas on order and will be reaching out to buy a new brass nub tomorrow.

Thanks in advance for any opinions.

Where abouts did you get your NPAS from please?  Trying to track one down. 
 

thanks

 

[Cyberlawyer]

Where abouts did you get your NPAS from please?

My first one came from here with no problems so ordered my second from the same place.

http://emperionstore.com/npas-kit-for-tokyo-marui-mws-gbb-ra-tech.html

 

[Festerfly]

My first one came from here with no problems so ordered my second from the same place.

http://emperionstore.com/npas-kit-for-tokyo-marui-mws-gbb-ra-tech.html

Excellent.  Thanks very much.  

 

[Cipher-032]

@Cyberlawyer I personally run a 6.05 in my SRS Silver back. It gives more accuracy over range. 6.03’s are usually good in a normal circumstance. Plus I’ve always herd good things with Orga. But worlds your oyster. 
 

Also bare in mind you want a barrel with good bore quality. 

This weekend I’ve updated the paint on my Mk18 Mod 1. I wasn’t happy with the first results. Too pale. This has much more character and depth. And all the weathering is deliberate ?

Just waiting for some

more stock magazines, Angry Gun high speed bolt. (Thinking the bronze BCM one) and maybe start thinking about upgrading the trigger box to full steel.

View attachment 54052

View attachment 54053

View attachment 54054

 

[Festerfly]

Great Job.  Looks amazing.  
 

can I ask the reason for the lack of paint on the upper receiver though?

 Thanks 

 

[Whisky1]

Great Job.  Looks amazing.  
 

can I ask the reason for the lack of paint on the upper receiver though?

 Thanks 

Coz' two tone be sexy..... ?

 

[Cipher-032]

Coz' two tone be sexy..... ?

@Festerfly exactly this.

 

[The Commander]

I got an M4A1 MWS arriving Monday, and I am on the lookout for a QD sling mount. Anyone here happens to know if this one is compatible with the MWS? It doesn't seem to have the little central teeth thing that some of the normal sling mounts do, and not sure if that's a problem or not.

 

[Cipher-032]

I got an M4A1 MWS arriving Monday, and I am on the lookout for a QD sling mount. Anyone here happens to know if this one is compatible with the MWS? It doesn't seem to have the little central teeth thing that some of the normal sling mounts do, and not sure if that's a problem or not.

Looks like that one just bolts onto the buffer tube. I run a knock off Magpul ASAP late on mine. It works.

 

[The Commander]

Looks like that one just bolts onto the buffer tube. I run a knock off Magpul ASAP late on mine. It works.

Thanks ? Does it move around or wiggles, or it stays on solidly enough to not bother ya?