-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Swap shoulders, it hangs back instead of in the way.
I use a two point; I pinched a pin and sling loop off another M4 to use on the A-sight. It's annoying the fitting is there and they didn't add the sling loop. Economy on a premium rif. lol :lol:
Last edited by a moderator:
- Thread starter
- #2,004
Fitted the angry gun nozzle. Fits well and the adjustment is nice and solid. Didn’t give me the FPS boost I was hoping for though. Max was 430 on a .20 with a crazy jet 410mm and a flamingo bucking. Might try a Prometheus 6.00 or a custom length EDGI
Colonel Kurtz
Members
- Jan 19, 2015
- 549
- 593
Did it increase it at all compared to stock nozzle? I'm guessing it's got screw you can put into the nozzle end to restrict flow, but otherwise uses a standard rocket valve not a npas? If it gives any kind of increase and is compatible with a dp enhanced rocket valve i might be tempted, i could do with another 10-20 fps
Last edited by a moderator:
I got a huge boost was shooting 2 joules with a .28 with the adjustment set to 85% open. 300mm TNT barrel with modify tan bucking.
Last edited by a moderator:
- Thread starter
- #2,007
might be either a seal issue at the hop or the piston skirt isnt lubed. it's shooting the same fps as my NPAS fitted that i had in previously, so I've imagine it's a boost on the standard nozzle. regardless of not hitting 500 fps with my current setup, i think it's a fantastic nozzle. The adjustment is rock solid so it should give consistency as good as a none adjustable nozzle at the rocket valve part at least. It's shooting 430 on a .20 which is 1.73 joules if i calculated correctly. 380'ish on a .32 which is closer to 2.2 joules.
DopeYourScope
Members
- May 29, 2018
- 263
- 88
I am a firm believer they are the best all round GBBR for sale at the moment so it’s no wonder they’re doing well.
Here we go... I am next with damaged buffer plunger... Check that half pushed out pin. Can it be the reason of the broken plunger? I have no photo but the end of spring was slightly deformed and pushed back into itself. Hope you underestand what I mean. Gun shooted 6-8k BB´s. I use propane gas. Can I buy all the new buffer (maybee metal one) or buy spacer from Dave SixG or something else? Thanks for advices guys. There are some pictures...
View attachment 50477
View attachment 50476
View attachment 50475View attachment 50478
View attachment 50479
View attachment 50477
View attachment 50476
View attachment 50475View attachment 50478
View attachment 50479
The exact same thing happened to me.
My spring inverted itself at the forward tip too. So I replaced the buffer with a custom made one from SixG and installed a SixG spacer and a guns modify spring from the guns modify Complete spring set, which i believe is slightly stronger then the standard. Now it runs like a beast.
- Thread starter
- #2,016
Didn’t realise yours was for sale. I wanted a vortex strikefire ii and then I needed a rifle to put it on so I had to buy one?
I’ve seen them break a few times. Thankfully there’s lots of options in terms of buffers. G&P make a cheap one that’s metal. Only one I wouldn’t recommend is the angrygun heavy buffer. It’s much too heavy and slows the cycling. Gives you loads of recoil, but that recoil is slow if that makes sense
Exactly the same as mine. It's obviously the weakest point. Got the replacement parts from Dave about to be installed. Will test this weekend.
The original part lasted 1k bbs on green gas.
Wolf at least you practice what you preach. Your influence affected my wallet
The original part lasted 1k bbs on green gas.
Wolf at least you practice what you preach. Your influence affected my wallet
Thank you Mr. Wo1f, I allready order Angry Gun Speed Buffer, New spring from Dynamic Precision for sure and send mail to Dave from SixG for HSB. I am very curious about that combination...
Similar threads
