Specna Edge/Orion Gearbox Stripped Gears Twice in 2 Months - 11.1v lipo

[Will (Bad Boy) Smith]

@MrInfernal I believe the x-asr is harder to program but looks possible for this. I had one for a few days to see if I could make my Firehawk have a semi function. TBH I kinda resent the markup on those mosfet devices and software, but it's a specialist system I guess. All of Airsoft gear is massively marked up AFAICT.

Yes

Yes

Yes

No you don't HAVE too

Yes faster returning

@Davegolf which tooth - the last nearest the piston head? And does the active braking need to be programmed by trial an error, or does the micro-controller self-adjust? 

 

[Davegolf]

The last tooth of the rack (nearest piston head) and the corresponding tooth on the sector gear.

I think you want to run a Gate Pico Nano AAB or MERF.

Or just buy a TM recoil and love it.

 

[Will (Bad Boy) Smith]

.......and the corresponding tooth on the sector gear.

whooah BOTH!? surely that would upset the balance of that gear, right?

In terms of Active Braking - does that work for Auto as well? How much of my problems would a Gate Titan just fix?

As an aside, for the previous failure, if I'd had silicone oil on the hopup - would that have caused me to adjust it high to get flight, and therefore too high, risking a failure by obstruction?

 

[MrInfernal]

So just FYI, I have installed M130 spring (same orion gearbox and edge internals) yesterday evening and so far everything works fine. Didn't have much time to test it properly, but I emptied two magazines in the garden without any problem, even fixed the problem with more than one shot on semi. I'm happy .

View attachment 49351

 

[Will (Bad Boy) Smith]

Nice. I think they work better with the bigger spring. That's probably my problem, especially with the 11.1v lipo. Your FPS is probably going to up around 400fps now though - where do you plan to play with it?

 

[Will (Bad Boy) Smith]

Nice. I think they work better with the bigger spring. That's probably my problem, especially with the 11.1v lipo. Your FPS is probably going to up around 400fps now though - where do you plan to play with it?

 

[MrInfernal]

Nice. I think they work better with the bigger spring. That's probably my problem, especially with the 11.1v lipo. Your FPS is probably going to up around 400fps now though - where do you plan to play with it?

Fields and games across the Czech Republic, since we have less strict rules concerning FPS limits.

FPS upgrade is done, now going to focus on flat hopping the piece.

 

[MrInfernal]

Just saw this test, they did it with M140 spring with a lot of magazines in series and it hold just fine FYI 

 

[Astalker]

So im not new to a.e.g's have built a hand ful of them include dsg builds . Your bevel gear strips like for for only a couple reasons . You gear is to high or to low in the box so the pinion gear just barely meshes . Or your bering / bushing is bad allowing lateral movement .