specna arms edge 2.0 H20 - issues with shimming, bb curving left with hop and FPS.

[Adolf Hamster]

So I tried to get the best photo I could, although subtle they are slightly missaligned but not a crazy amount I could try sand down the bit that holds the nub but it would be a bit hard to sand it level I assume. I will give it a try though.

Click to shrink...

Looks like standard-issue crappily aligned mould tooling that's very common to see.

Not bad enough to yeild the barrel pic you had earlier though, at least from what i can see.

If the barrel window has been miscut are there any recommended barrels?

Click to shrink...

For the premium end i'm a pdi 6.01 stainless man, but the zci 6.02's from ak2m4 are good. Think ak2m4 has switched to xt now which i havent used but i trust he's picked decent stuff.

Even if there is a miscut though, that woundn't stop you being able to twiddle it a bit to compensate.

 

[Colin Allen]

View attachment 39644
So I tried to get the best photo I could, although subtle they are slightly missaligned but not a crazy amount I could try sand down the bit that holds the nub but it would be a bit hard to sand it level I assume. I will give it a try though.

Well I've ordered a maple leaf macaron 60 degree with omega nub so we will see if there's a difference! If the barrel window has been miscut are there any recommended barrels? I've been told by the Airsoft discord community that the ML barrels aren't great in quality. They reccomend lambda 01 but it's just over double in price.

And yes you are all legends! Thanks a lot for helping!

Click to shrink...

The XT barrels, again from AK2M4, are very good; he should be getting more in stock very soon.