Silent industries hop combo with pdi inner barrel

T

tinks33

New member
Joined
Jan 15, 2026
Messages
9
Reaction score
1
Hi all just a quick one what hop rubbers and nubs are people running in the silent industries hop unit with a pdi inner barrel trying to find that sweet spot
 
tinks33 said:
Did you have to sand the lips down or just straight on cause I heard people sanded them down funny enough I’ve just put in a maple leaf 70 and a omega nub literally 10 minutes ago just haven't tested as of yet
Click to expand...
Click to shrink...
Fuck no. The Super Mac is a standard bucking in MTW's. In general, if you feel you need to sand lips down on a bucking, use a different bucking.

You can't use the default big patch big contact nub with a PDI barrel due to the cut of the window. It's a nuisance and it limits you down really to either the super mac or the G&G green (also with omega nub).
 
Steveocee said:
Fuck no. The Super Mac is a standard bucking in MTW's. In general, if you feel you need to sand lips down on a bucking, use a different bucking.

You can't use the default big patch big contact nub with a PDI barrel due to the cut of the window. It's a nuisance and it limits you down really to either the super mac or the G&G green (also with omega nub).
Click to expand...
Click to shrink...
Thanks for that really appreciate it and ye I didn’t want to do sanding haha G&G green and si nub was not that great but I heard the maple leaf 70 and omega nub had great results for the setup I’m using on .3s and .32s
 
tinks33 said:
Thanks for that really appreciate it and ye I didn’t want to do sanding haha G&G green and si nub was not that great but I heard the maple leaf 70 and omega nub had great results for the setup I’m using on .3s and .32s
Click to expand...
Click to shrink...
I only shoot .32's with mine. The G&G gets more mixed opinion than the Maple Leaf but there is a difference between a macron and super macron, the super has slimmer lips.
Saying that though, the SI uses a ring on the bucking lips so you should see any ill fittings.
 
I used the white ring so it’s a looser fit for the rubber instead of the black one I feel it’s a better option to use the super macron 70 than the G&G the results I’ve heard are just more better so I’m hoping when I test it I’ll see the difference but I really appreciate the help you have given me
 
tinks33 said:
I used the white ring so it’s a looser fit for the rubber instead of the black one I feel it’s a better option to use the super macron 70 than the G&G the results I’ve heard are just more better so I’m hoping when I test it I’ll see the difference but I really appreciate the help you have given me
Click to expand...
Click to shrink...
It depends on your expectation.
I have mine set to get the best I can from 1.14J, it's dwell is set 1 notch higher than it should be and if I'm out rangine aegs then I'm happy. Range is good, accuracy and grouping is good and it feeds consistently.
 
Steveocee said:
It depends on your expectation.
I have mine set to get the best I can from 1.14J, it's dwell is set 1 notch higher than it should be and if I'm out rangine aegs then I'm happy. Range is good, accuracy and grouping is good and it feeds consistently.
Click to expand...
Click to shrink...
Well that’s what I want I only use .3s or .32s so if I can get the same I’m happy I have the blinc installed so I can luckily set it without any hassle
 
You must log in or register to reply here.
Back
Top