• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

S6 gas mask airsoft safe lenses?

parramoom

Members
Joined
Sep 4, 2021
Messages
61
Reaction score
17
So i took out the lenses which are like the gp7 but with a screw instead and i was wondering what plastic would i need to use to make it safe for airsoft and withstand 500+ fps (alot of snipers on my field) 

 
You need Polycarbonate. You want a stock Polycarbonate lens large enough to cut down to size. The other issue is the curvature. It goes flat to curve to flat uncommon shape in most lenses. 

 
You need Polycarbonate. You want a stock Polycarbonate lens large enough to cut down to size. The other issue is the curvature. It goes flat to curve to flat uncommon shape in most lenses. 
I know how to curve it im going to do that first and then put the glass one over it and draw the outline then cut to size but the problem is i dont know what polycarbonate to get is there different grades to it ? 

 
Lexan is a common well regarded brand. Personally I'd be inclined to use something that's an actual protective goggle lens that already has a close enough curve .

 
Back
Top