Quick Questions & Simple Answers.

[Guest]

anyone know of any other torches with similar if not identical end caps to the old Surefire 6P?

looking for one for my MP5 handguard (still need the MP5 :lol: !!) to use as my 6P is not LED so looks dull!

The ICS handguard, the old 6P screws in, i tried a G2X and it didn't like the thread......

cant you put an LED bulb in it?

 

[Speedbird_666]

cant you put an LED bulb in it?

Yeh, I said the same thing on his status update.

A cheap T6 single-mode drop-in can be had for £6-7 quid off eBay. Problem is the current shipping situation from China.

 

[djben9]

I tried two j ordered via chine and ebay, one the spring had fallen off and the other seemed to warm the batteries up!

if you have any recommendations I’ll try them. I will look on there again, this was about this time last year 

 

[Guest]

I tried two j ordered via chine and ebay, one the spring had fallen off and the other seemed to warm the batteries up!

if you have any recommendations I’ll try them. I will look on there again, this was about this time last year 

I bought some decent LED’s for mag lights on Amazon, UK next day, might work?

 

[Hatchet]

These drops ins are meant to be quite good, but US based and you have the usual shipping, etc. - Malkoff Devices .

 

[Guest]

Anyone with an account on AR15.com?

I signed up yesterday, trying to do due diligence on a Reddit seller, who I’m communicating with via email.

He claims to be not getting my messages through AR15.com  so wondered if I can send someone else amessage

 cheers in advance

 

[Eulenspiegel]

Anyone know if the Rapax 2J spring will fit in an action army vsr 10 45 degree piston (the orange one)? I know the spring guide will need to be changed to 9mm but will the 13mm diameter spring fit?

Looking online it should fit, but was hoping someone can confirm. 

 

[DRay]

Quick way to fix a wobbly barrel? 
 

Just had a second hand RIF delivered and there is some up/down play in the barrel. The hand guard is solid. 
 

Is this a major issue? Something I should get on to the seller about? (It wasn’t mentioned in the item description). 

 

[Skara]

Quick way to fix a wobbly barrel? 
 

Just had a second hand RIF delivered and there is some up/down play in the barrel. The hand guard is solid. 
 

Is this a major issue? Something I should get on to the seller about? (It wasn’t mentioned in the item description). 

get some barrel nut washers, the nut is most likely bottoming out on the threads without even touching the barrel.

 

[DRay]

A trip to AK2M4 it is then! 

 

[Skara]

A trip to AK2M4 it is then! 

Before doing it, take the gun apart to check for more shady shit the seller "forgot" to tell you.

 

[witchcraft58a]

Does anyone know the retaining screw sizes for the TM Glock 17 Gen 3 front trigger chassis and rear hammer chassis?

Cheers.

 

[solitaire360]

Mods please delete post

 

[Airsoft_Mr B]

One of the tabs that the motor connector attach to looks to have broken off, to confirm my own thoughts should it be simple enough to cut another one out of Alu sheet and solder this in place? It's a perfectly good motor otherwise. 

View attachment 71474

 

[Hudson]

You can always get a small ring connector for the wire and use the little screw to secure it that way. 

 

[Lozart]

One of the tabs that the motor connector attach to looks to have broken off, to confirm my own thoughts should it be simple enough to cut another one out of Alu sheet and solder this in place? It's a perfectly good motor otherwise. 

View attachment 71474

You can always get a small ring connector for the wire and use the little screw to secure it that way. 

Aluminium isn't great as a conductor and isn't going to stand up to much mechanical abuse in that application. Better to get a ring crimp like @Hudson suggested.

 

[cropzy]

Opinions on specna arms?

Looking to buy a cheapo RIF as a backup incase my main decides to break on a game day.

Looking at this https://www.patrolbase.co.uk/specna-arms-rock-river-arms-sa-c10-core-stubby-cqb-carbine?pv=7952, can't really find many review on it that are in English. I just want to know if its pot metal and if the performance/quality is comparable to a combat machine

 

[Lozart]

Opinions on specna arms?

Looking to buy a cheapo RIF as a backup incase my main decides to break on a game day.

Looking at this https://www.patrolbase.co.uk/specna-arms-rock-river-arms-sa-c10-core-stubby-cqb-carbine?pv=7952, can't really find many review on it that are in English. I just want to know if its pot metal and if the performance/quality is comparable to a combat machine

Core are plastic not metal, but yes, comparable to a combat machine if not slightly better being a bit newer.

 

[Skara]

Opinions on specna arms?

Better than G&G imo.

Gearboxes are easier to work with and they come with decent barrels and hop units out of the box.

Plus they are cheaper than G&Gs while still providing steel bushings and a nice SHS piston.

 

[djben9]

Have been looking at the sub £1000 versions of Night vision optics as not for airsoft...!, curious to know how good they are

made by yukon and pulsar etc.

Most places are OOS so not to worried as can wait for re-stock etc.

are they ok if out in a dark place walking the dog  :lol:

might consider for a night game but yet to be allowed out!!