• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Hi capa Issues

Pepgamer4u

Members
Joined
Feb 8, 2018
Messages
22
Reaction score
0
Having some hi capa issues and wondered if anyone could help.

1 I have an Airsoft masterpiece brass hopup chamber and when this is installed there’s no seal between the nozzle and bucking. 
 

2 it won’t hop anything higher than a .2 at all

3 I was wondering how far the nozzle is meant to return as mine seems to get stuck before going all the way back to the rear of the bbu 

any help would be great 

 
Having some hi capa issues and wondered if anyone could help.

1 I have an Airsoft masterpiece brass hopup chamber and when this is installed there’s no seal between the nozzle and bucking. 

2 it won’t hop anything higher than a .2 at all

3 I was wondering how far the nozzle is meant to return as mine seems to get stuck before going all the way back to the rear of the bbu 

any help would be great 


This is very odd. AM hopups are generally fantastic. 

What bucking are you using?

What barrel are you using?

What wheel and arm are you using?

Nozzle not returning, sounds like your piston head / nozzle needs a light lube and what nozzle return spring are you using?

 
Open up the gearbox, sounds like the tappet spring is broken or not strong enough to return the tappet plate. Clean the inside shells of the gearbox too.

Was it working before this hop unit was installed?

 
Open up the gearbox, sounds like the tappet spring is broken or not strong enough to return the tappet plate. Clean the inside shells of the gearbox too.

Was it working before this hop unit was installed?
Gearbox ??????, on a Hi-capa ?

 
Back
Top