Help with upgrades on G&G wild hog

[Sarge84]

Morning all,

Currently running a wild hog for QCB and have upgraded the following.


13:1 gears gate
Maxx hop up unit
Prometheus barrel TBB 300mm
Gsre aster v2 Bluetooth model
G&g ifrit 25k motor
Maxx cylinder head
Maxx nozzle
Mag pull stock

Current fps 310 on 0.25. Is there anything obvious I'm missing. It's accurate and high rate of fire just would like to bump the Fps up a little.

Regards S

 

[Austeyr]

Morning all,

Currently running a wild hog for QCB and have upgraded the following.


13:1 gears gate
Maxx hop up unit
Prometheus barrel TBB 300mm
Gsre aster v2 Bluetooth model
G&g ifrit 25k motor
Maxx cylinder head
Maxx nozzle
Mag pull stock

Current fps 310 on 0.25. Is there anything obvious I'm missing. It's accurate and high rate of fire just would like to bump the Fps up a little.

Regards S

Click to shrink...

If you go any higher you’ll be over the legal limit? 310 on a 0.25g BB is 1.12j.

On top of that, chasing FPS isn’t a good way to measure how “good” a replica is. You’ve got the important things, it’s accurate and as long as the fps is consistent and so are the shots it’s fine.

 

[Sarge84]

Sorry yes you are correct. What's better 310 with 0.25 or 350 with 0.2s?

Also any upgrades worth doing to make it better?

 

[Austeyr]

Sorry yes you are correct. What's better 310 with 0.25 or 350 with 0.2s?

Click to shrink...

They're the same thing...

Also any upgrades worth doing to make it better?

Click to shrink...

You've mentioned you've changed your barrel and hop unit but no mention of a new bucking?

 

[Lozart]

Sorry yes you are correct. What's better 310 with 0.25 or 350 with 0.2s?

Also any upgrades worth doing to make it better?

Click to shrink...

310 on 0.25 is 1.12J, 350 on 0.2 is 1.14J so yes 350 on a 0.2g is higher than 310 on a 0.25 but whether or not it's any better is arguable.

You say it's accurate and you're happy with the RoF so what are you trying to actually improve?

 

[Lozart]

They're the same thing...

Click to shrink...

Technically, technically, they're not. 350 on 0.2 is 313-314 on a 0.25. Pointless but not technically the same. Technically.

 

[Sarge84]

@Austeyr It's got a quantum bucking installed with Max metal arm. If that's what you were asking.

I was more asking about increasing fire rate it's circa 38 at the minute.

 

[Colin Allen]

Morning all,

Currently running a wild hog for QCB and have upgraded the following.


13:1 gears gate
Maxx hop up unit
Prometheus barrel TBB 300mm
Gsre aster v2 Bluetooth model
G&g ifrit 25k motor
Maxx cylinder head
Maxx nozzle
Mag pull stock

Current fps 310 on 0.25. Is there anything obvious I'm missing. It's accurate and high rate of fire just would like to bump the Fps up a little.

Regards S

Click to shrink...

What are you trying to gain by pushing the power up, especially in CQB? Do you want to increase the range?

You are 3 fps short of the limit at most sites; increasing the power to the limit will make no observable difference.

It is always best to go with heavier BBs, although some CQB sites have weight limits.

Edited as I saw your reply about the hop rubber.