Help Me Build a Disposable One-use Automatic Uzi

[Airsoft_87]

Hi, everyone!

I'm working on a project, and I need to build an airsoft automatic mini uzi that will be used just ONCE. I'm looking for the cheapest parts and solutions that can yield automatic firing. I'm just talking about the mechanisms of the gun, forget the body, but bearing in mind it will have to fit within a Tokyo Marui uzi. Any ideas? Thank you so much, people. Looking forward to hearing from you.

Peace and love.

 

[Tackle]

Dude, are you talking about it firing bb's airsoft stylee, or trying to build, for example, blank firing internals to fit inside a tm uzi ?, for filming etc

 

[padraigthesniper]

Airsoft guns are not capable of being made into makeshift, guns... They are toys and break easily even the airsoft ak's are about as durable as a remote controlled helicopter.  If its for filming buy a GBB Mac 11 they cycle and spray gas you can add film FX to them very easily.

 

[Rogerborg]

Er, confused.  The only TM "mini" Uzi that I'm aware of is the diddy toy sized version that takes AA batteries and shoots about .1J, fully auto only.

Are you talking about that one, or the full sized TM Uzi - which I'd be surprised to see anyone meddling with given the rarity.

 

[BigStew]

TM only make a full size Uzi so do you have a Springer or AEG? Unless you mean the toy scale ones which are electric anyway. cheapest quickest option is just to buy a Well full size AEP Uzi, next cheapest option will be to fit a kwc gbb mini Uzi into the body you have, it wouldn't require that much modification. Other option is HPA (expensive and will require lots of fabrication work) or get an AEP Mac 11 and fit the internals ( a lot cheaper than HPA but still lots of fabrication).

 

[padraigthesniper]

Why does it have to be disposable youre making it sound like a Hitman weapon? loool If its for filming you need multiple takes dont you?

 

[Tackle]

I thought the half term was last week ??

 

[Adolf Hamster]

why the hell does it only need to work once?

tbh, it's likely impossible, by which i mean if it's capable of spewing bb's on auto at all then that de-facto will make it reusable.

as mentioned the cheapest solution is to just buy one of the existing products that already do exactly what you want, even with the depreciation selling it on secondhand when you're done it'll be orders of magnitude cheaper and easier than making something yourself that works.

 

[heroshark]

Just buy a well one. For £30 it'll cycle a few hundred bbs give or take.

 

[Airsoft_87]

Dude, are you talking about it firing bb's airsoft stylee, or trying to build, for example, blank firing internals to fit inside a tm uzi ?, for filming etc

Yes, it will be a movie prop replica that will fire bb's, and I need to make a number of them, so the option of buying a gun, and taking the mechanism is not a viable solution. Thanks!!

why the hell does it only need to work once?

tbh, it's likely impossible, by which i mean if it's capable of spewing bb's on auto at all then that de-facto will make it reusable.

as mentioned the cheapest solution is to just buy one of the existing products that already do exactly what you want, even with the depreciation selling it on secondhand when you're done it'll be orders of magnitude cheaper and easier than making something yourself that works.

It will be a movie pro replica that will be impossible to disassemble, and I need to make a number of them.

Why does it have to be disposable youre making it sound like a Hitman weapon? loool If its for filming you need multiple takes dont you?

It will be a movie pro replica impossible to disassemble, and I need to make a number of them.

 

[Tackle]

Yes, it will be a movie prop replica that will fire bb's, and I need to make a number of them, so the option of buying a gun, and taking the mechanism is not a viable solution. Thanks!!

Still confused, the TM shell/body you refer to, is that a springer ?, rather than TM's existing full auto aep series.

if this is the case, assuming you can get the springers at a much cheaper price than the aep version, its highly unlikely you'll find cost effective internals you need, assuming it's even possible, which I highly doubt.

surely better to have cheap a non firing replicas, & add cgi muzzle flashes post production ?

 

[Neptune]

TM already do an automatic UZI, or are specifically after a mini UZI?

Why do you want it to be impossible to disassemble?

 

[Airsoft_87]

49 minutes ago, Rogerborg said:

Er, confused.  The only TM "mini" Uzi that I'm aware of is the diddy toy sized version that takes AA batteries and shoots about .1J, fully auto only.

Sorry, not familiar with weapons' names. This is the one I'm talking about.

View attachment 74791

 

[Rogerborg]

Well, you've certainly intrigued us.  I'm still not entirely sure what you need them to do that they don't already do.

If it's actually Uzis you're after, they're pretty rare, and Tokyo Marui never did a "mini" Uzi as far as I'm aware (other than the teeny tiny toy one).

If it's something mini-Uzi-like (for the purposes of Joe Viewer) then the electric Jing Gong JG.0452 Mac-10 will shoot BBs on full auto.  Or the green gas HFC HG-203 Mac-11 will also full auto on gas, with a recoil action.

One issue at the moment is stock levels, which remain low.  You might have to settle for whatever you can find.

Ah, got you.  OK, that's a full size Uzi rather than a "mini", and airsoft versions are sadly rare and unlikely to come cheap.

KWC do a "mini" Uzi that's full auto capable. But again, you'll have trouble finding one, let alone several.

Is this for a period piece, or are you just looking for something smallish that can spit BBs?  Do you want some visible moving action on them?  Most electric airsoft guns don't have external moving parts - there are exceptions, but generally you have to go to gas to get proper blowback actions.

The more detail you can give us about what you're after and why, the more helpful we can (hopefully) be with suggestions.

 

[Airsoft_87]

TM already do an automatic UZI, or are specifically after a mini UZI?

Why do you want it to be impossible to disassemble?

It has to be that size, but not that particular machine gun. I refered to that one in the first place because I wanted you to know the room available for the mechanisms of the weapon I'm planning to make. 

It will be impossible to disassemble because the weapon it's based on, is disposable, and I'd like to keep that part of the story in the gun.

 

[BigStew]

This is your cheapest quickest option if I am understanding you right.  https://www.bbgunsuk.co.uk/products/Well-D91-Electric-UZI-Airsoft-BB-Gun-in-blue.html these will fire single or full auto and you are not going to have to do any fabrication other than paint them.

 

[Airsoft_87]

11 minutes ago, Rogerborg said:

Well, you've certainly intrigued us.  I'm still not entirely sure what you need them to do that they don't already do.

If it's actually Uzis you're after, they're pretty rare, and Tokyo Marui never did a "mini" Uzi as far as I'm aware (other than the teeny tiny toy one).

If it's something mini-Uzi-like (for the purposes of Joe Viewer) then the electric Jing Gong JG.0452 Mac-10 will shoot BBs on full auto.  Or the green gas HFC HG-203 Mac-11 will also full auto on gas, with a recoil action.

One issue at the moment is stock levels, which remain low.  You might have to settle for whatever you can find.

Right. And about the mechanisms, could you make me a list of the things I would be needing in order to achieve something near to the fire rate of the gun you're refering to if I were to start one from scratch? Remember, the cheapest cheapest options. Thanks!

 

[hitmanNo2]

Why does a movie prop need to fire BBs?  If you want something impossible to disassemble, that you need a bunch of and are cheap, sounds like you need some rubber prop guns and some editing skills to make it look like it's shooting.

 

[Airsoft_87]

This is your cheapest quickest option if I am understanding you right.  https://www.bbgunsuk.co.uk/products/Well-D91-Electric-UZI-Airsoft-BB-Gun-in-blue.html these will fire single or full auto and you are not going to have to do any fabrication other than paint them.

That is great, thanks!! And now, I ask you...what would you buy if you were to make a gun like that, same fire rate, using the cheapest parts available? (Only mechanism, not body) Would it be possible to reduce costs?

 

[BigStew]

Right. And about the mechanisms, could you make me a list of the things I would be needing in order to achieve something near to the fire rate of the gun you're refering to if I were to start one from scratch? Remember, the cheapest cheapest options. Thanks!

There is not such thing as cheap when building from scratch. From what you are asking it appears you have no knowledge of Airsoft do your self a favour and just use off the shelf guns.