-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Gun picture thread
- Thread starter M_P
- Start date
so finally after a little trial and error got my Keymod Flush. If you look at my quote the first pic you can see roughly 1/2" gap.... tis no more.Cord fitted doesn't look half bad. Just need a toggle cord stop.
Airsoft-Ed
Retired Moderator
- Nov 7, 2010
- 4,164
- 941
Been a while since I even visited this thread, let alone posted a photo.
Just packing the kit for tomorrow and thought there was something immensely satisfying about the compactness of my SCAR, and I thought it looked pretty boss from this angle too.
So here's an unbelievably high quality shot from my toaster:
Just packing the kit for tomorrow and thought there was something immensely satisfying about the compactness of my SCAR, and I thought it looked pretty boss from this angle too.
So here's an unbelievably high quality shot from my toaster:
Here's my src ak47-m with hastily bought cyma tactical hand guard and pistol grip...hmm...i actually quite like it haha.
Also shown is my TM 1911 meu I got off Loz, still love this lil bastard, got three crotch shots with it last game ?
View attachment 14869
Also shown is my TM 1911 meu I got off Loz, still love this lil bastard, got three crotch shots with it last game ?
View attachment 14869
SeniorSpaz87
Supporters
- May 24, 2014
- 1,786
- 873
This is my G&G Short Raider yall have heard so much about. Hopefully won't be too hot for The Mall tomorrow... Got a Rogers SuperStoc, Safariland torch, Safariland Single Point Harness & Adapter, some generic green laser sight with a pressure pad, a B&T tracer unit/silencer, and a short DBoys M203 on this gun.
Also included is a pic of my gun bag with my primary, the Raider, as well as my secondaries; a WE P226 and G17. My backups there include two ACM guns, an MP40 (really going along to chronograph, won't use it) and a P90.
Also included is a pic of my gun bag with my primary, the Raider, as well as my secondaries; a WE P226 and G17. My backups there include two ACM guns, an MP40 (really going along to chronograph, won't use it) and a P90.
Last edited by a moderator:
SeniorSpaz87
Supporters
- May 24, 2014
- 1,786
- 873
Hmm, don't know why it double posted... Ignore the first one
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
airsoftwarrior147
Members
- Aug 16, 2012
- 578
- 140
that looks sweet ed, on a side note is the rear iron sight at risk or being damaged hanging off the back?
Last edited by a moderator:
MZKaleem
Members
- Oct 3, 2010
- 2,145
- 90
I hope these photo's aren't too big haha.
I have an ICS M4 and a TM G3 too. I'll see if I can get pictures of those later.
- CYMA CM031, bog standard AK74
- G&G GK5c, replica of the Swedish standard issue rifle the AK5c.
- TM G36c, wanted to set it up in an armed police sort of way, which was not difficult at all
I have an ICS M4 and a TM G3 too. I'll see if I can get pictures of those later.
DEDSEC
Members
- Jun 2, 2014
- 488
- 280
Full LMT setup done! Contour attached, SRS sight, ASCU V2 and R-Hop installed. Taking it out next weekends skirmish to see how she performs.
View attachment 14878
View attachment 14878
TacMaster
Members
- Dec 3, 2012
- 1,888
- 848
The SRS looks amazing! I need to get myself one of those...Full LMT setup done! Contour attached, SRS sight, ASCU V2 and R-Hop installed. Taking it out next weekends skirmish to see how she performs.
IMG_20150222_114509.jpg
DEDSEC
Members
- Jun 2, 2014
- 488
- 280
Thank you! I was (at first) dreading it when I bought it as 1. it cost a small fortune for an RDS and 2. it's a biiiig sight. However putting it on I was really pleased with how it looked.
team flex
Members
- May 10, 2014
- 1,104
- 355
do you have a youtube channel? would love to see some of the footage from that contour roam 2
DEDSEC
Members
- Jun 2, 2014
- 488
- 280
No not yet, but now that I have a Contour and GoPro set up I'm going to start and hopefully get a channel going.do you have a youtube channel? would love to see some of the footage from that contour roam 2
Airsoft-Ed
Retired Moderator
- Nov 7, 2010
- 4,164
- 941
A little I guess, but I wasn't ever going to play with the stock folded, it's just for transport and I thought the compactness was satisfying so I wanted to capture it lol.
Airsoft-Ed
Retired Moderator
- Nov 7, 2010
- 4,164
- 941
What do you think of the SRS sights?Full LMT setup done! Contour attached, SRS sight, ASCU V2 and R-Hop installed. Taking it out next weekends skirmish to see how she performs.
IMG_20150222_114509.jpg
I think they look awesome, but they seem to have just popped up out of no where lol, I feel like I don't know enough about them to justify buying one.
DEDSEC
Members
- Jun 2, 2014
- 488
- 280
Quite true, they did just spontaneously pop up without notice. I personally think they're great, but it's all down to personal preference. You have to get the gun right though, it's a big bulky sight and will look ridiculous on quite a few guns I'd imagine. It looks nice on my Marui Scar-L and my LMT. However I couldn't say it would look nice on let's say, an MP5 or other submachine guns/ PDW's.
In terms of performance it's wonderful though. Ten levels of brightness and no red/ green laser business, just a good, clear, pinpoint red dot. Adjusted by Allan screws so no stupid flathead adjustments or covers to loose. Obviously being a large sight the window is very large too which I personally like. Doesn't restrict target acquisition and let's you see clearly down range and great for close encounters too. Built to work with 3x magnifiers too so you can throw on a Aimpoint 3x magnifier and be on your way. Full metal, solid as a rock, can't go wrong.
Just a bit pricy..
Last edited by a moderator:
SeniorSpaz87
Supporters
- May 24, 2014
- 1,786
- 873
Well, after action report is in. Raider using 122a gas dropped to around 320, so it would have been fine for The Mall. However, for whatever the gas kept venting out after the first shot; might have been because it was quite cold in there today; also, my gas bottle was low and Luke didn't have any gas in stock, so moved onto my secondary, my ACM P90.This is my G&G Short Raider yall have heard so much about. Hopefully won't be too hot for The Mall tomorrow... Got a Rogers SuperStoc, Safariland torch, Safariland Single Point Harness & Adapter, some generic green laser sight with a pressure pad, a B&T tracer unit/silencer, and a short DBoys M203 on this gun.
image.jpg
Also included is a pic of my gun bag with my primary, the Raider, as well as my secondaries; a WE P226 and G17. My backups there include two ACM guns, an MP40 (really going along to chronograph, won't use it) and a P90.
image.jpg
Ran into problem #2 with this one... Probably due to a grease buildup in the front of the gearbox, my P90 jumped 80 FPS, which is ridiculous. So I was awkwardly running around with an MP40 with one low cap mag for the day; got a few looks for it too
.All in all, not bad once I found a gun I could use. Raider should work once I get more gas, and my MP40 held its own against guns with much more ammo, +1 to me possibly going to some WWII games someday...
Similar threads
