Gun picture thread

[Qlimax]

My SMP is done. No more changes now. New grips added, new Prowin Hop added, new silencer which does work.

 

[SimonQuigley]

Mk18 MOD 1

G&G combat machine internals and receiver

Madbull Daniel Defence MK18 rail 9.5

Bad Dragon Mk18 length barrel

Clone Aimpoint M2

FMA upgraded PEQ-15

TMC AOR1 sling

CYMA KAC grip

View attachment 14159

 

[Chock]

Sorting out M4s for tomorrow:

 

[DEDSEC]

So I was going to add this a few weeks ago then totally got over my head with work and family sooooo I forgot...

Nevertheless, this is my current primary. A G&G TR4-18 with built in tracer unit and tonnes more. I have ordered a genuine MagPul CTR stock in tan but it's coming from the USA hence it's taking a while.

View attachment 14187

 

[M_P]

Pretty sure a real magpul stock will be lose on the buffer tube- AEG spec stocks aren't wide enough for real steal spec gbbrs, so I'd assume a real one won't fit an aeg.

 

[jcheeseright]

it'll fit, but it'll be looser than a 40 year old whore.

 

[Lozart]

Pretty sure a real magpul stock will be lose on the buffer tube- AEG spec stocks aren't wide enough for real steal spec gbbrs, so I'd assume a real one won't fit an aeg.

Depends on whether it's a milspec or civilian one...

 

[TheFull9]

Depends on the AEG manufacturer.

I have a mil-spec MOE stock on a G&G gun here, very close fit indeed. The MOE and B5 Bravo I've used on my G&P were insanely tight fitting, could barely be adjusted. RS AR stocks fit 'just right' on all my TM recoil guns and KWAs. Very loose on my 2 Avalon/VFCs though and I tried a variety of stock types on them so it's definitely the airsoft buffer tubes that change, not the stock internal dimensions.

As per usual with airsoft, tolerances vary wildly. Long as you buy mil-spec AR stocks rather than comm spec, it'll generally be just fine and if it's loose a layer or two of leccy tape will take the slop out.

 

[TacMaster]

 

[DEDSEC]

Pretty sure a real magpul stock will be lose on the buffer tube- AEG spec stocks aren't wide enough for real steal spec gbbrs, so I'd assume a real one won't fit an aeg.

Doesn't matter, it comes with a real steel buffertube anyways.

 

[M_P]

A real one won't fit an aeg but from what others have said you could be alright.

 

[straffham]

One I've been working on for a while, early 'nam Colt CAR-15 Carbine mod 610, started out as a JG M733, since fitted with a G&P early M16 receiver (no mag fence or bolt forward assist), cut down barrel (10") and bayonnet lug removed. Needs a flat delta ring and early Nam pistol grip to finish when I get hold of them.View attachment 14194View attachment 14195

 

[Spatch]

One I've been working on for a while, early 'nam Colt CAR-15 Carbine mod 610, started out as a JG M733, since fitted with a G&P early M16 receiver (no mag fence or bolt forward assist), cut down barrel (10") and bayonnet lug removed. Needs a flat delta ring and early Nam pistol grip to finish when I get hold of them.

IMG_20141203_163530.jpg

IMG_20141203_163441.jpg

With that foregrip, stock and flash hider it would be an XM177 rather than a CAR-15, the CAR was a different and earlier variant, used the same reciever and was the predecessor of what you have created, used only in very small numbers by specific units before being replaced by the XM177 E1 then E2 bud but what you have created is a very no XM example

 

[Samurai]

The iron sight is really not needed here.

 

[straffham]

With that foregrip, stock and flash hider it would be an XM177 rather than a CAR-15, the CAR was a different and earlier variant, used the same reciever and was the predecessor of what you have created, used only in very small numbers by specific units before being replaced by the XM177 E1 then E2 bud but what you have created is a very no XM example

Lol blame the Boxing Day cheer and senior moment, meant XM not Car 15! But either way its a Mod 610 and reasonably accurate bar the delta ring and pistol grip. Receiver has been corrected to the correct pattern too. G&P'S VN receiver being slightly incorrect in details.

 

[TacMaster]

The iron sight is really not needed here.

Only for looks I don't use that front flip up sight on my rifles, may as well stick it on the GL

 

[PT247]

stick a TAG grenade in there tho and you'll be greatfull for the sight!

 

[DEDSEC]

Really trying to make the most of my 5-7 before it sadly goes after so many fun times together...

View attachment 14221

 

[jcheeseright]

It's a work in progress, needs the gas block modifying, a surefire scout light and some paint.... But it's getting there

 

[SgtTalbert]

It has arrived....









4 x TM Mid caps

1 x High Cap

1 x G&P Aimpoint

1 x AFG

1 x M300a Torch

2 x Kong Power 7.4 1400mAh Lipo Split battery