• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

JimFromHorsham said:
View attachment 128691
Click to expand...


Oh myyy......?

I haven't been following this, but I'm gonna go back and find details!

Anyway...

This isn't that exciting when it comes to gun pictures, but I'm a happy boy and had to share. 

Last year I gave a friend my cheapy Cyma SVD, for servicing and upgrading. 

Then life got in the way.

I got a rotator cuff injury, he lost his driving licence (illness, not booze), and what with one thing and another he's had it ever since. 

On Sunday I got it back. 

Full steel rack piston, 110 spring, different piston head, new hop rubber, hop nub, new set of bushings for the gears, combat union hop.

Its kicking .3s out around 1.4 to 1.5 joules.

I'm on site tomorrow, to continue with our site overhaul, and I'll be giving her a real test for range. 

View attachment 128768

View attachment 128769

Now all I need is an SVD sling. 

 
Hudson said:
Had this in bits due to a dead trigger board for a couple of years, and finally got around to sorting it out.

Acquired a new stock tube and upper receiver rail to complete it, and now have it finished!

Swapped out the gearbox from my full length version which is currently being built up as a DMR to put in this one, along with a PDI 6.05 barrel and 50º Archwick bucking, I'll be looking forward to trying it out!

Brings the total of working VZ58s I have to 4 now.

View attachment 128271

View attachment 128272

View attachment 128273

View attachment 128274
Click to expand...
where did you get the trigger board from? I need to replace mine I think

 
Lambda Defence with SD kit, Marayama and Archwick GBB's. On Vorsk 6 gas and using .2g BB's we get 340 FPS on the Lambda, 320 on the Archwick and 315 on the Marayama. The Lambda is the softest shooting and could do with some beefier bolt return springs and it's a bit underwhelming to fire. If you are after quality and performance then get the Archwick as it's outstanding. I tried it with 0.3g's and it had no issues lifting them and the hop still had more life in it and I think it probably could do 0.36g BB's out the box.

If the straight mag version is what you want, but on a budget, them Marayama are (or already have) releasing a straight mag version with the spare mags around £25 overseas which is about 1/2 the price of the Archwick mags but sadly I doubt they will be compatible between GBB's. 

Oh and the Lambda magwell is annoying as VFC and Raven mags can move forwards and backwards, sometimes releasing a little gas, which is a bit annoying. Some sticky backed foam inside the magwell will sort it.

 View attachment 129102

 
Last edited by a moderator:
I don’t think it identifies as a carbine any more ?

Probably the most problematic build I’ve had, but it’s finally done! 
 

Umarex G36C with a custom barrel extension (It’s about .4” too long ?) Kurz style gas block, Ultima H-Key rail, SOTAC (I believe) EOTech and magnifier and a LLM when it arrives.

Stock needs drilling to fit as the Umarex one isn’t correct for the impression, hence it just “resting” and the fire selector markings need removing and replaced with the “SEF” 

Reference attached, Luftlandeaufklärungskompanie 260

View attachment 129109

View attachment 129110

 
Hudson said:
By full size, I meant the full stock, longer barreled version 

View attachment 129173
Click to expand...
Really nice camo job. Did you use netting as your guide lines for the hexagons?

Mad dog 49 said:
New pew, replacement for my LM4D workhorse. Paired it with a PEQ15, 3x magnifier and RDS and finished it off with a Bifrost BT for flame fun.

View attachment 129067
Click to expand...
Did you manage to remove the twang noise from the nozel spring and recoil spring? If so how did you manage to do it because ive tried putting grease on the sping and it still has a loud twang noise.

 
Aye, but the others in his pouches look just like my one ;)

Just as well I'm not a stitch counter lol.

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
239
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
492
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
645
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
925
ButcherBill
ButcherBill
Back
Top