• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

They're all Tanaka except the bottom 1858 which is a tanaka system but made by HWS. 

I think the two engraved models are the only ones in the UK. They're Tanaka "Renaissance" versions. They're eye wateringly expensive though, but I do hope he uses them. 

The top left is a Bisley variant I've not seen so I needed that in my life and I prefer the Bisley to the standard saa. 

 
Oooh that Bisley is gorgeous

Since we're on the subject of revolvers...

Here's a King Arms SAA (one of the few gas revolvers I've seen. But only shoots about 240fps)

All metal shells. BB goes at the top so can actually be loaded without taking out the rounds.

Thanks to GazzaElite for this one ?

View attachment 111373

View attachment 111374

View attachment 111375

 
Last edited by a moderator:
EDcase said:
Oooh that Bisley is gorgeous

Since we're on the subject of revolvers...

Here's a King Arms SAA (one of the few gas revolvers I've seen. But only shoots about 240fps)

All metal shells. BB goes at the top so can actually be loaded without taking out the rounds.

Thanks to GazzaElite for this one ?
Click to expand...


I had nothing but dissapointment with mine, but I hope you have a better experience. Lots of the 1st gen ones appear to have been made with the barrel out of line with the cylinder resulting in innacuracy and topsspin being applied to the bb. 

It's also a clone of the Marushin SAA if you ever need to find bits for it. 

The tanakas have their gas inside the cylinder, don't take shells but you load through the front. They have a hop and shoot with a bit more poke than the king arms or marushin. I do thoroughly reccomend one if you like revolvers. 

 
Last edited by a moderator:
I've been lucky with this one.  Fixed a slight leak in the reservoir which is in the handle.

No hop but shoots relatively straight in my garden test of 20m

I'll definitely look out for a Tanaka ?

 
Nothing new and still not finished but I managed to get the handguard mostly sorted on the G&G L85A2 ETU. Got a B&T/Airsoft Artisan dovetail to RIS optic rail coming in next couple of days. Airsoft Artisan flash hider coming in a couple weeks. Perun ETU++ to go into it tomorrow. The gun doesn't like my 11.1v buffer tube batteries and double cycles on semi however on my nunchuck 11.1v batteries it works flawlessly.

On another topic, for owners of the gun, how do you arrange your batteries in this? There isn't a lot of space and i'm debating on taking out the gas block/gas tube to free up some space. Feedback on that appreciated. Also, should I disable the blowback? I've heard it can cause the gearbox to lockup on semi and there's potential for the little spring jumping into the gearbox.

View attachment 111521

 
Last edited by a moderator:
MrTea said:
for owners of the gun, how do you arrange your batteries in this? There isn't a lot of space and i'm debating on taking out the gas block/gas tube to free up some space. Feedback on that appreciated. Also, should I disable the blowback? I've heard it can cause the gearbox to lockup on semi and there's potential for the little spring jumping into the gearbox.
Click to expand...
I have one ready to visit the local tech, it's blowback had been disabled ( I hear it fails pretty quickly), I also have an A3 that the charching handle pretty much dropped off after only a few dry shots).
The hand guard has been dodged to fit the bracket(Some tin can cut & wrapped around the 'holes' to tighten the fit) but I' don't think it's a Daniel Defence front rail I have so didn't have the issue you've mentioned in another post..

I find a lipo fits fine in the fore grip (I bought a few of the micro lipo's to fit the A3 & use them for all my Rif's).

View attachment 111531

 
gavinkempsell said:
I find a lipo fits fine in the fore grip (I bought a few of the micro lipo's to fit the A3 & use them for all my Rif's).
Click to expand...


By micro Lipo do you mean the PEQ box small square/rectangular batteries? Is there enough room to just drop them in? Pic related;

View attachment 111532

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
237
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
491
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
645
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
925
ButcherBill
ButcherBill
Back
Top