• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

I brought an LCT AS VAL second hand years back for an incredibly good price (£200 with 10 mid caps), however It has been sat on my gun wall for awhile and needed some TLC.  After LCT and TWI announced they were going to release external parts for the gun,  I decided I was going to give this gun the TLC it deserves.

View attachment 103741

My LCT AS VAL Modernization project is finally complete.

 
Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing.

Before:

View attachment 103917

After:

View attachment 103918

Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

View attachment 103919

 
My project gun. I've got a tan Holy Warrior EXPS3 S1 to go on top. Tan mags are on order. The one thing I hate is the gap between the flash hider and the handguard. I tried loads of different outer barrel combinations to get it as close to the handguard as I could, while allowing the suppressor to attach, and this is what I ended up having to settle on. Will have to try and fix this later. I believe that suppressor is wide enough to accept an Acetech AT2000 tracer unit which would a cool bit of functionality for it to have. Still can't decide on using the black RIS covers or the tan ones.

View attachment 104097

View attachment 104098

 
Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing.

Before:

View attachment 103917

After:

View attachment 103918

Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

View attachment 103919
Damn you I was going to get that ?

 
I might have finally gone too far...

Careful VSR-X, custom brass parts made myself, Spring Custom Works SV-98 chassis and carry handle, real POSP 3-9x42, Monoloc adapter, white phosphor PVS-14. Uses custom cut 55 round VSR mags, overhops anything lighter than .46gs and can easily toss .69g BBs 120m (videos on YouTube to prove thats real range and not "airsofter range"). Monoloc and PVS-14 come off for day games obviously.

View attachment 104212

 
I might have finally gone too far...

Careful VSR-X, custom brass parts made myself, Spring Custom Works SV-98 chassis and carry handle, real POSP 3-9x42, Monoloc adapter, white phosphor PVS-14. Uses custom cut 55 round VSR mags, overhops anything lighter than .46gs and can easily toss .69g BBs 120m (videos on YouTube to prove thats real range and not "airsofter range"). Monoloc and PVS-14 come off for day games obviously.

View attachment 104212


You scope appears to have some rifle on it.

 
It's finally ready (thanks to Negative Airsoft) - my Magpul M4 with olive drab furniture. Not based on any real world firearm, just a rifle completely done in Magpul's design language; a collection of bits and bobs I find aesthetically pleasing and to match up with the G&P Magpul receiver (manufactured back when Magpul and PTS had a partnership).

Came with Magpul PTS tan furniture originally (which I might sell), but I much prefer the two toning here with olive drab over tan, as it seems a little bit more special, a bit more "military" and a bit more uncommon (to me) than tan and black.

Very pleased with how it's come together (although Luke suggested that aesthetically it would be better with an EOTech).  No doubt the M203 will come off after the first game. Looks cool though! And it's got a Perun, so it beeps confidently which makes me giggle every time I play with it.

View attachment 104304

View attachment 104307

 
Last edited by a moderator:
I personally think it’s better suited with a ACOG.

I think it would look more complete with an older generation magazine and maybe a Magpul itself 

Should definitely leave the 203 on, it makes it!

More press ups!!

I always like the moe handgaurds

 
I'd really like to try an ELCAN with it, see if it meshes. But I'm looking for an optic with better eye relief in any case, cos I bought that ACOG back when Ebairsoft used to be called Ebaybanned, and I basically have to have my face shoved right into the glass to see through it. Any suggestions?

I think it would look more complete with an older generation magazine and maybe a Magpul itself 


Yes to the Magpul, and I'd love to find an older legit PMAG in OD but I'd probably have better chance of winning the lottery. I've got loads of the tan ones mind (which again I'll probably sell).

 
Airsoft ACOGs are shocking on eye relief for sure.

A gun that length def needs a magnified optic IMO, or at least a beefy RDS like an Aimpoint Comp M4

Rattle can the mags if you’ve got some old Gen PMAGs

 
I'd really like to try an ELCAN with it, see if it meshes. But I'm looking for an optic with better eye relief in any case, cos I bought that ACOG back when Ebairsoft used to be called Ebaybanned, and I basically have to have my face shoved right into the glass to see through it. Any suggestions?

Yes to the Magpul, and I'd love to find an older legit PMAG in OD but I'd probably have better chance of winning the lottery. I've got loads of the tan ones mind (which again I'll probably sell).
try getting rid of the rear BUIS which is looking redundant anyway , that’ll give you an extra 2” of eye relief lol

Airsoft ACOGs are shocking on eye relief for sure.

A gun that length def needs a magnified optic IMO, or at least a beefy RDS like an Aimpoint Comp M4

Rattle can the mags if you’ve got some old Gen PMAGs
genuine ACOGS arent much better tbh .

 
Last edited by a moderator:
20230326_163656.jpg


Must cut the Shadowfoam...

 
Back
Top