Gearbox Diagram Needed
- Thread starter bully78
- Start date
D
DrAlexanderTobacco
Guest
That RIF uses a standard Version 2 Gearbox so you should be able to get by with looking at any diagram you can find for that - what are you trying to fix?
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,230
standard v2?
got a diagram here:
is it one of their pneumatic blowback ones? because those have a hole in the top of the cylinder which feeds the blowback mechanism, i'd reccommend removing it and putting a standard cylinder in, it's just a horrific source of leaks.
got a diagram here:
is it one of their pneumatic blowback ones? because those have a hole in the top of the cylinder which feeds the blowback mechanism, i'd reccommend removing it and putting a standard cylinder in, it's just a horrific source of leaks.
- Thread starter
- #4
wanted a diagram for reference on part names as ive a couple of problems I want to fix
1, safety not working .
2, inconsistent fps
3, very loud
4, doesn't feed with new g&g green bucking
cheers buddy
I was looking at the cylinder this morning and thought just that
Skara
Members
- Oct 20, 2017
- 3,244
- 1,254
Just be careful, removing the pneumatic blowback will increase the energy output, you may want a cylinder with a larger port or nick a coil or two off the spring.
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,230
this is a very good point, if you don't have much headroom for your site limit i'd suggest pre-emptively changing the spring to one that's the right energy.
