gaming pc build

[team flex]

right to update: done the hard drive, connected pretty much everything into the psu, so now all the mini circuit boards on the case have power. I think everything else has power as well, there should be a number of connectors that don't have anything in it? i think e.g sys fan 1 and 2 etc won't be in use as the case has a mini circuit board which is plugged in, although I have one connector which I have no idea about. will edit it in,

 

[team flex]

here these are them, the ones I have highlighted in red. I have no idea what they do/where they go or connect into, please help!

thanks guys

sorry about the paint editing as well lol

View attachment 14840

 

[Undieing_Lust]

Those connectors are 3 or 4 pin fan connectors. I can't remember if you case has a fan controller on the back. If it does power it and plug them in there. If not your going to have to find headers on your mobo to power them.

 

[team flex]

this is what I have

I have no idea where the plug goes though, not the same connection

 

[BBrotherwood]

That is just a fan splitter to make the case a bit neater. What plug are you confused about?

 

[Undieing_Lust]

You plug in the molex hanging from your fan controller to your PSU's molex power. And when you have that done just plug in your fan fan connectors to the 3 pin connectors hanging from your fan controller.

(Edit: It should tell you in your case manual how to connect it. Sorry for long replays on phone.)

 

[team flex]

You plug in the molex hanging from your fan controller to your PSU's molex power. And when you have that done just plug in your fan fan connectors to the 3 pin connectors hanging from your fan controller.

(Edit: It should tell you in your case manual how to connect it. Sorry for long replays on phone.)

the molex is all done, that powers the LED's and the fans. However there is one connector that I have no idea of what it does, just uploading photos to photobucket, I can't find where it goes anywhere it seems

That is just a fan splitter to make the case a bit neater. What plug are you confused about?

i will upload some photos to show you.

will add another one when done

 

[team flex]

right guys, it is actually just another way to power the fans, so it is not needed. Was a bit worried then. Ok, so now i just need to check everything, and then I have to wait another day -_- to get the ram lol to actually use it. Should I power it on to see if it works or not?

 

[Undieing_Lust]

Without RAM, you cannot get a display.

 

[team flex]

Without RAM, you cannot get a display.

ok, scrap that then, will just wait a day...

prepare for a lot of photos (about 60 )

 

[team flex]

right scrap that, just uploaded all the photos but I actually hit the limit, even with photobucket and cba to do it any more, so just check out my photobucket, all the pictures there

http://s1320.photobucket.com/user/getonmylvl123/library/?sort=3&page=1

 

[team flex]

ok right, so I just need to know what you think of this in terms of cable management and looks. Not that much red, but when the bright red corsair vengeance ram comes it will make the build look more red

ALSO: in the first few pictures the motherboard looks like it has something sticky on it. Is this normal? just some glue or something

also shame there is so much foam back here, means it is very hard to put the side panel on. and the dents

thanks guys

 

[Undieing_Lust]

Looks fine to me. One thing I always do it route the front panel connectors under the motherboard before I put the mobo in. Just to make it extra tidy. But looks good.

 

[team flex]

Looks fine to me. One thing I always do it route the front panel connectors under the motherboard before I put the mobo in. Just to make it extra tidy. But looks good.

sounds good, going to re check everything but hopefully it will be up and running tomorrow PC MASTER RACE HERE I COME! TF2 500FPS XD

 

[Undieing_Lust]

https://i.imgur.com/7LSPvoc.jpg

 

[team flex]

https://i.imgur.com/7LSPvoc.jpg

, I have one problem though. The 24pin power connector won't go in. Literally, i feel like I am going to break the mobo as it is flexing a lot... but the click won't happen, it's nearly there, what should I do, it's definitely in tight

 

[Undieing_Lust]

If its to tight then pull more of the cable thought the cut out to take stress off the cable. If it's still to tight. you can route the cable were the harddrives plug in from. (Will upload pic so you know what I mean.)

 

[Undieing_Lust]

http://s7.postimg.org/gxb0i2i57/P2186995_zps7iobcnj1.jpg

 

[team flex]

If it to tight then pull more of the cable thought the cut out to take stress off the cable. If it's still to tight. you can route the cable were the harddrives plug in from. (Will upload pic so you know what I mean.)

ok, i have tried but still doesn't work, will try the hard drive thing. The gaming 5 was not built for the h440, the sata, and also the usb 3 cables are next to the routing cable, where it bends in meaning there is like no easy way of putting them in.

I bent the usb 3 pins, nearly cried lol but seemed to bend them back and then managed to put the cable in, hopefully it works but damn I spent 30 mins just trying to put it in got me sweating lol

 

[team flex]

http://s7.postimg.org/gxb0i2i57/P2186995_zps7iobcnj1.jpg

so you mean move it up so it's not pulling down right?