Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
I think that so called powerful motor is more torque than speed tbh
(ran some weird fps/rof tests and was still struggling to hit 18/19 rof
m105 silent piston + proper silent head this time with AOE etc....
Also think G&G AR latch or the spring to be more exact is $hit
the spring wire is like a pube with no way as robust as SHS
my CM18 AR latch snapped and spring was shot - SHS AR = sweet
halfway through converting my lame FH and the AR is letting it over-run on 11.1v sometimes
got odd fps and just noticed the hop up tiny spring has disappeared yet don't remember taking tiny barrel out lately ???
Just notice the hop all flopping about & no spring - ahh that is why I getting 190fps then - damn it
is cool though dropped CM18 top receiver barrel on there and was shooting 350-355fps - phew
so yeah proper silent cyl head did make a difference it seems & may keep it as is
and put hi-speed cm box/lower receiver @ 330 in firehawk setup I guess
jeez there's guns n bits everywhere atm..
Blow me this techy stuff is about 75% grief 25% success or my usual 2 steps forward then 1 step backwards ffs
My fet died on me too but shs hi speed and 11-12v was giving her hell at 30+ rps
hopefully in next day or two can build my own 3034 and see if that melts
plus got a cheap fet coming that I will see how long that lasts before I melt it
but yeah that so called Powerful G&G motor - not much faster and if is maybe torquey - wtf put 23:1 gears with say stock spring in there
could of been fine with normal motor on 23:1 gears yet Raider has 18:1 + stock motor
Really don't make sense to me wtf G&G were doing on these other FH's
(ran some weird fps/rof tests and was still struggling to hit 18/19 rof
m105 silent piston + proper silent head this time with AOE etc....
Also think G&G AR latch or the spring to be more exact is $hit
the spring wire is like a pube with no way as robust as SHS
my CM18 AR latch snapped and spring was shot - SHS AR = sweet
halfway through converting my lame FH and the AR is letting it over-run on 11.1v sometimes
got odd fps and just noticed the hop up tiny spring has disappeared yet don't remember taking tiny barrel out lately ???
Just notice the hop all flopping about & no spring - ahh that is why I getting 190fps then - damn it
is cool though dropped CM18 top receiver barrel on there and was shooting 350-355fps - phew
so yeah proper silent cyl head did make a difference it seems & may keep it as is
and put hi-speed cm box/lower receiver @ 330 in firehawk setup I guess
jeez there's guns n bits everywhere atm..
Blow me this techy stuff is about 75% grief 25% success or my usual 2 steps forward then 1 step backwards ffs
My fet died on me too but shs hi speed and 11-12v was giving her hell at 30+ rps
hopefully in next day or two can build my own 3034 and see if that melts
plus got a cheap fet coming that I will see how long that lasts before I melt it
but yeah that so called Powerful G&G motor - not much faster and if is maybe torquey - wtf put 23:1 gears with say stock spring in there
could of been fine with normal motor on 23:1 gears yet Raider has 18:1 + stock motor
Really don't make sense to me wtf G&G were doing on these other FH's
Last edited by a moderator: