Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Educate a paintballer ..... why have a policy of not chronographing green gas pistols?
Is it inconsistency & adjustment?
Sounds like a problem area to me.
For example with co2 we would set a lower chrono limit to allow for fluctuation going up
Would still take too long and then people would just test on lower gas and remove suppressors.You only have to keep an eye out for the gas guns and pistols with suppressors and keep a stash of heavier ammo to test those players.
Aeg's don't really joule creep to any significant degree without a lot of pre-meditated setup so the ol' .2's is fine here, as are most pistols with standard barrels.
Would still take too long and then people would just test on lower gas and remove suppressors.
In a perfect world it would be easy but reality is very different.
why have a policy of not chronographing green gas pistols?
As an example, in my ignorance I added a nice new tightbore extended barrel to my WE G19 running through a suppresor. The site I used to play at didnt chrono pistols so no big deal I thought.
Then I went to the Mall, where they did chrono it. And it was running at 390fps on 0.2s with green gas.
Whoops. ? Its now been sitting on my gun rack for months gathering dust as I havent got round to buying a new/original sized barrel for it and misplaced the original.
yep, this is a case in point- you didn't even realise you were running hot.
i made the same mistake although luckily i did think to chrono it before chucking the old barrel so i now have a long pistol barrel sitting around that i can't use.
would have been worse if you'd been running heavier ammo as a longer barrel is more time for joule creep to take effect.
Again how much time do you think chrono marshals have?you check the suppressor, if it's got a barrel extension in it/under it it'll almost certainly be hot.
better than not checking at all......
Again how much time do you think chrono marshals have?
There is no guarantee that players won't just remove them before chrono as I have said before.
Honestly there is a reason why it is done that way. Try working chrono and then talk.
There is no guarantee that players won't just remove them before chrono as I have said before.
Heading back to the safe zone and changing the inner barrel on a pistol post chrono would be a bit suspect though![]()
It is more the suppressors with an internal barrel that are the issue. Do know of a guy who did try and swap out his pistol innards after chrono and run power up gas.Heading back to the safe zone and changing the inner barrel on a pistol post chrono would be a bit suspect though![]()
Jesus christ buddy you don't a clue. Been in on more discussions with people who actually know what it is like to run a chrono than I care to remember and guess what everyone agrees current method is best.There's never any guarantee, but as pointed out at least if your using player weights and keeping an eye out for certain types of guns then you'll catch out the honest folk who genuinely dont understand what they've done.
If you dont have enough time to do it for a large group then the obvious follow up question is how many marshalls are there and how the hell do you hope to police any other aspect of airsoft cheating?
Jesus christ buddy you don't a clue. Been in on more discussions with people who actually know what it is like to run a chrono than I care to remember and guess what everyone agrees current method is best.
A site like the mall used to run 10+ marshals and you would have 4 or 5 on chrono for a 100 players and no way on earth would that be feasible. Players would just lie about weight remove suppressors and run low power gas if they wanted to cheat. The best method is as it is done single weight so standard test.
Let it go and get the fact your idea while well meaning is not really workable for any site that has a large-ish group of players.
Theyre quite uncommon arent they? Ive only seen that kind as the Angry gun powerup type for the MP9/MP7. Never seen one for a pistol.
That being said, having a suppressor on a pistol looks really cool, but every time Ive used one (inner barrel or not) its been totally impractical and the extra weight on the outer barrel causes cycling issues.
Er nope no one sound anything about can't be arsed said not feasible, don't take what is said and try and twist it. Sites have tried it and have found it takes too long and didn't do fuck all to make anything better. This is why the few who tried reverted back to doing it the tried and tested way.Like i said originally- cant be arsed doing it properly. Asking for bb weights and chrono'ing on energy will catch the honest folk who dont understand physics, as you say cheaters gonna cheat so at least use the method that requires people to be dishonest and follow up by catching people in the field.
All guns should be checked and site insurances would state that. Any site not doing it is just negligent.@Adolf Hamster @Immortal
Cheers guys
I’ve seen wide variations (in Paintball), and would much prefer to check a pistol then assume it’s under the limit, particularly if 99% of them are expected to be under the limit - that’s the fastest way through chrono with instant passes
.... and as sites ought to have insurance in place, I very much doubt that risk assessments state that sites will assume green gas pistols are under powered
Moral of the story children ? give yourself a good margin for error , you get your gun set up to fireing at 349.99999999fps on your mates chrono your gonna get burned and it’ll end in tears !