Eye Wear for Glasses Wearer

A

Angel Monroe

Members
Joined
Mar 20, 2021
Messages
1
Reaction score
0
Hello, my name is Angel, I am new to Airsoft.

I would like to know which eye wear (NOT MESH) 

that I can wear with my glasses on, not wearing 

my glasses is a no no, nor is contact lenses.

Any advice or recommendations please ?

 
Welcome

If you wear glasses underneath its ok to use mesh goggles.

 
Last edited by a moderator:
Having glasses on is a horrible thing is airsoft. two lots of surface to really fog up.

Ideally a goggle which sits far from the face is a nice idea. Alternative opitiions are ballistic proscription glasses. which would normally set you back at least £50 for a good set.

 
I have tried multiple brands of goggles and the only one i've liked and fits over my glasses are the Bolle Pilot safety goggles, BUT I do suffer with fogging when it's warm. I would love a pair of prescription safety specs but don't know where to look...

 
I use Paintball googles (Empire E-Vents) and Fogtech wipes these days. I don't get much in the way of fogging issues with this setup.

Tried everything else, including Rx inserts and Polycarbonate prescription glasses from (the now defunct) Tactical Optician.

Unfortunately, after 10 years of contact lenses, I can't use them anymore. Tried nearly every brand of disposables but my eyes just won't take them at all.

 
Any of the ‘reputable’ safety glasses that take prescription inserts + sawfly anti fog wipes (what I’ve been using for a good few yrs now)and you’ll be golden . If you can’t get on with inserts and have to use your normal glasses then get some fan assisted goggles over the top of them , my eldest has used this system for a good few yrs as well with no problem .

 
Have a prescription pair of Bolle safety goggles. Can get them from most opticians if you ask. Not cheep but well worth it.

 
I got a pair of nuprol with lens inserts, got the lens done for £12.

I put a review here:




 
Last edited by a moderator:
+1 for contact lenses. Admittedly I've worn them for almost 20 years however for airsoft I'd be utterly knackered if I had to rely on my glasses.

 
sjhirst said:
I use these:

https://www.safetyspecs.co.uk/view-safety-frames/items-for-sale/rxblack-en166f-mirror-tinted-with-prescription-insert

Slightly dearer than some other options but they've been spot on for me.
Click to expand...
Click to shrink...


As they're only rated the EN166F they're not actually rated high enough. The  F rating is tested with a 0.86g steel ball at 45m/s which equates to 0.86J. Given that site limits are around 1.13 J (0.2g at 350FPS for an AEG, higher for DMR and BASR) you should be looking at an impact rating of EN 166B or an ANSI equivalent.

 
I have a pair of valken tango goggles that came with rx inserts, if your on a budget the googles are decent though they do need some anti fog spray on them, the rx inserts cost me £30 to get my prescription made up. 

 
I use Revision Sawflys with prescription inserts. They're fantastic, and don't fog much when combined with catcrap anti-fog.

Also, if you change your mind on mesh, Heroshark does prescription inserts for his Mako frames. I've got a pair and they're fantastic, again I pair them with catcrap anti-fog and I never have any issues fogging because air flow is a lot freer with mesh.

Which I choose to use is usually dependent on how I feel. Anyway, having a backup pair of eyepro never hurts!

 
Warq Helmet. end of issue

No fog of glases, or visor, light and comfy, only one strap to worry about

I wear glasses. Tried Dye and Bolle X800, they all still fogged. Warq just doesn't fog, ever

 
MadMole said:
Warq Helmet. end of issue

No fog of glases, or visor, light and comfy, only one strap to worry about

I wear glasses. Tried Dye and Bolle X800, they all still fogged. Warq just doesn't fog, ever
Click to expand...
Click to shrink...
What’s the sizing on a Warq helmet? I’ve been tempted for those reasons, but I have a mahoosive head. 

 
Dalno said:
I have tried multiple brands of goggles and the only one i've liked and fits over my glasses are the Bolle Pilot safety goggles, BUT I do suffer with fogging when it's warm. I would love a pair of prescription safety specs but don't know where to look...
Click to expand...
Click to shrink...
You can get prescription safety glasses from most opticians, If you work in a engineering, workshop environment you could possibly get them as PPE 

 
Personally I’m fond of the Bolle Tracker II with a prescription insert. They cost about £60 with the prescription lense. However once you have the prescription insert they can be taken out and moved to a new set of goggles easily and the safety part only costs about £15 ish. So easy to swap them out if the lenses get scratched or if you want to swap to a tinted pair on a sunny day.

Most of the time I use contact lenses, but I still like the Bolle Tracker II even without the prescription insert as they resist fogging really well.

 
You must log in or register to reply here.

Similar threads

R
Looking for a over barrel foam silencer?
Replies
5
Views
174
The_Lord_Poncho
The_Lord_Poncho
Back
Top