DE M89 (UMP) Upgrade recommendations needed!

[Shurit]

This is my first post on here and if this is in the incorrect place or not appropriate please let me know!

Anyways to continue, I purchased a Double Eagle M89 as a CQB choice due to a low budget. I'm looking into finding upgrades to help improve overall performance such as improving the slow trigger response, getting a new & longer inner barrel w/ suppressor, new hop-up unit and a different gear box. However I have no idea where to start and would like some recommendations from someone who know's a little more about this model and what would go well! I am on a rather tight budget so keep that in mind. 

Also, if anyone knows how to get a suppressor for this thing please let me know, I'm aware the G&G quick attach suppressor can fit this, it just doesn't seem to be on the market anymore :/. There are no threads on the outer barrel or under the flash hider so would it even be possible to attach a suppressor? 

Pic attached is current set up.

Thanks guys.

View attachment 33758

 

[Samurai]

longer inner barrel

no need. Won't be more accurate but you will need to change the cylinder to keep the same performace.

Get a good inner barrel the same length as the one now.

Don't throw too much money at it. It's an OK gun, but it's still a DE.

Take it apart, clean up fully, replace the bushings if they are plastic, reshim, relube. Get a good hopup bucking. Put a high torque motor in it and a 7.4 lipo with high C rating for the trigger response. Weak point is the hopup adjusting. I don't know if there are aftermarket hopups for it. Use at least 0.25 or 0.28g BBs.

 

[Polluxtroy69]

Literally bought my UMP last week. It's a G&G with suppressor. It's a quick fit and release one. It has a tight bore barrel that goes up to the end (or there abouts) of the suppressor. So it can be done. 

View attachment 35642

 

[Polluxtroy69]

https://www.zerooneairsoft.com/product_info.php?products_id=2711

 

[Druid799]

Literally bought my UMP last week. It's a G&G with suppressor. It's a quick fit and release one. It has a tight bore barrel that goes up to the end (or there abouts) of the suppressor. So it can be done. 

View attachment 35642

Yes but yours is a totally different gun , his is a Double Eagle and yours is a G&G , there great cheap’n’cheerful starter guns that as long as you look after them will run and run , if they were motorbikes his is a Chinese crate bikes that cost £1200 and yours is a Honda that cost six grand . To do what he’s said he’d like to do he’ll need to do a LOT of work and chuck a lot of money at it , which quite frankly isn’t worth it . Best option is just tweak it a bit and run it till it dies then think is it worth rebuilding or not ? where as yours is already at the good performance stage and don’t really need anything doing to it . 

 

[Question]

What type of suppresor or silencer can be added to a double eagle m89 ump ??