Hey fellow airsofters,
I recently purchased a bone yard sniper rifle that was advertised as Well L96 which I assumed was an MB01. Now, despite being a bone yard, it shot .32s at 390 fps which puts it at 2.2 joules so I knew that it had been modified. The Hop up wasn’t working that well so wanted to check the hop up to see what the issue was.
On stripping it down, I can see it has an upgraded trigger box (full metal) however that’s where the issue starts. Having watched a number of MB01and MB08 strip down videos and the internals of my rifle do not match those in all the videos. As can be seen in the uploaded photos, mine has a plastic ‘loading chute’ which I cannot find on either of the MB01 or the MB08. Also when I went to remove the bolt, there is a fin attached that grabs the bb from the mag so I cannot remove the bolt as in the strip down videos.
Also the hop up is completely different, there is a wheel that is stepped and pushes a small rod up that obviously pushes into hop up. This was snapped which is the reason the hop up isn’t working.
Any how, my question is, is this Well MB01 or something else, secondly how do I remove the bolt?
I recently purchased a bone yard sniper rifle that was advertised as Well L96 which I assumed was an MB01. Now, despite being a bone yard, it shot .32s at 390 fps which puts it at 2.2 joules so I knew that it had been modified. The Hop up wasn’t working that well so wanted to check the hop up to see what the issue was.
On stripping it down, I can see it has an upgraded trigger box (full metal) however that’s where the issue starts. Having watched a number of MB01and MB08 strip down videos and the internals of my rifle do not match those in all the videos. As can be seen in the uploaded photos, mine has a plastic ‘loading chute’ which I cannot find on either of the MB01 or the MB08. Also when I went to remove the bolt, there is a fin attached that grabs the bb from the mag so I cannot remove the bolt as in the strip down videos.
Also the hop up is completely different, there is a wheel that is stepped and pushes a small rod up that obviously pushes into hop up. This was snapped which is the reason the hop up isn’t working.
Any how, my question is, is this Well MB01 or something else, secondly how do I remove the bolt?
