Custom Barrel Extensions - Where to find?

[Austeyr]

Is there anywhere that makes custom sized barrel extensions?

I need a 15.25cm barrel extension with a 14mm CCW thread at the base and a 14mm CW thread at the top, however it needs to be made to the thickness of a G36 barrel extension. I don't want to also put together 2 different barrel extensions to achieve the same thing as it'll look tacky lol

 

[Anonymoose]

Let me see if i have an M14 x 1.0 die. I might be able to make you one.

 

[Austeyr]

Let me see if i have an M14 x 1.0 die. I might be able to make you one.

Click to shrink...

Spoke with ButcherBill and the G36 barrel is too thick to fit an SLR flash hider so I’ll need something thinner than that.

If you’re able to make a barrel extension for me I’d be very happy to discuss it further once I get the flash hider I need the barrel extension for?

 

[LMKipper]

Let me see if i have an M14 x 1.0 die. I might be able to make you one.

Click to shrink...

I've got one if you need it from the last time I replaced the thread on a barrel. Got a set of taps too.

 

[Anonymoose]

I've got one if you need it from the last time I replaced the thread on a barrel. Got a set of taps too.

Click to shrink...

I have M14 x 1.0 LH taps and dies, not sure about RH.

Really need to fix the thread cutting function on my lathe.

 

[BigAl]

Any local engineering shop or old bike with the in shed should be able to do this. Ask around at your local site. Failing that give these a shout.

HOME | LC's Engineering Outpost

www.lcsengineeringoutpost.com