• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Compatible SR25 VFC (GBB) pistol grips

davidf

Members
Joined
Feb 7, 2024
Messages
155
Reaction score
14
Anyone know which pistol grips are compatible with the SR25 VFC (GBB) platform? 

I did test a spare MOE+ grip but its shaping was way off. 

Looking for something that is just more comfortable that the stock grip it has. 

Thanks all

 
I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.

 
I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.


I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

 
I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 
Any real steel grip you buy will have a hole for the selector spring, VFC grips don't have the hole. You'll need to either plug the hole in the grip or use a real steel spring/detent. You can also use wolverine MTW detent kit as they're properly sized up, though if you are buying from brownells you should be able to get a spring and detent from there.

Just to add, if you do use an MTW/real spring and detent the selector will feel a lot more crisp.

 
Last edited by a moderator:
Back
Top