• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

CM16 Front sight removal

Monty

Retired Moderator
Joined
Apr 22, 2012
Messages
2,846
Reaction score
1,407
Hi all,

I want to buy a new front sight, like a flip up sight and I need to know, can I remove the front sight of my G&G Combat machine CM16?

 
yeah there's two metal pins holding the sight on at the bottom and you will have to remove the flash hider there should be a screw holding it in place remove that and unscrew it also depending on the way the hand guards mounted it may come off or wobble a bit

 
yeah there's two metal pins holding the sight on at the bottom and you will have to remove the flash hider there should be a screw holding it in place remove that and unscrew it also depending on the way the hand guards mounted it may come off or wobble a bit
Their's no pins, it's just one barrel piece. ): Oh well

 
G&g combat machine ones are moulded to the barrel so there's no way of removal short of a hack saw

 
You will probably need a new barrel if you want to change the front sight. I looked at doing it with mine but gave up and made a whole new upper to swap over if I wanted to change the lenght of my CM16 CQB.

 
Back
Top