Asomodai
AF-UK patch owner
- Jun 14, 2017
- 3,139
- 1,046
Some more stuff! Need prices ta!
Dytac SLR AK74 - 284FPS on .28
ZCI 433mm Inner Barrel
Guarder Clear Hop Rubber
SHS 14 ½ piston
G&G brass Cylinder Head
G&G V3 Gearbox
G&G Bushings
SLD Piston Head
S&T Aluminium Full Cylinder
Lct Hop unit
Perun basic Mosfet
Sorbo
SHS High Torque
ZCI Advanced 18:1 gearset.
Deans wired.
Completely gutted and rebuilt as the stock gearbox was nasty. A very very quiet rifle (For an AK). Perfectly shimmed. Steel Receiver parts. The current railed cover is a CYMA one, but will include the original steel Dytac one along with the rear AK sight.
Includes a single high cap mag.
Has seen maybe 4/5 Skirmishes. Has a little wear but nothing to write home about.
Can be shipped.
-----------------------------------------
SRC XM8C
Unskirmished. With minor storage marks.
O&T steel inner barrel 6.04mm.
Guarder Clear Rubber (I think).
Wired to Tamiya
Never got around to modifying it further. It may have a XT 22TPA Neo High Torque motor but not 100% certain right now. Will have to open it and look.
A cute and rare thing. Comes with a single high cap mag.... Could probably ship.
----------------------------------------
Unissued Full Swiss M83 TAZ uniform for the large/tall of us. Only worn to try for size... Then I lost a stone and a bit within a month.
Trousers are the all important 38" Waist/32" Leg size which is difficult to find.
The Field shirt is 44-46" Chest.
Also includes brand new helmet cover.
------------------------------------------------
Russian SSO/SPOSN Smersh for SVD and VSS Short mags. Also includes AK Pouches if you want to switch out.
Used twice. Has a little but of dried dirt on it, but completely solid bit of kit, with no obvious loose stitching or other issues. Olive Drab colour. Since the war and COVID started, prices have been going up and up for a new set of these. (180 euros for a new set, not including the spare pouches mine has).
What do you reckon on this?
--------------------------------------
Slightly used FMA Airframe.
I bought this open box in a shop going out of business. I used it twice and never used it again as I decided I am not a helmet guy in the slightest.
It's very solid, has some scratches from storage. Nothing wrong with it otherwise.
It's a large size and fits my 62cm noggin with room to spare.
-----------
There you have it for now! More things will be coming up for appraisal in the next few weeks. Any help with pricing would be ace!
Dytac SLR AK74 - 284FPS on .28
ZCI 433mm Inner Barrel
Guarder Clear Hop Rubber
SHS 14 ½ piston
G&G brass Cylinder Head
G&G V3 Gearbox
G&G Bushings
SLD Piston Head
S&T Aluminium Full Cylinder
Lct Hop unit
Perun basic Mosfet
Sorbo
SHS High Torque
ZCI Advanced 18:1 gearset.
Deans wired.
Completely gutted and rebuilt as the stock gearbox was nasty. A very very quiet rifle (For an AK). Perfectly shimmed. Steel Receiver parts. The current railed cover is a CYMA one, but will include the original steel Dytac one along with the rear AK sight.
Includes a single high cap mag.
Has seen maybe 4/5 Skirmishes. Has a little wear but nothing to write home about.
Can be shipped.
-----------------------------------------
SRC XM8C
Unskirmished. With minor storage marks.
O&T steel inner barrel 6.04mm.
Guarder Clear Rubber (I think).
Wired to Tamiya
Never got around to modifying it further. It may have a XT 22TPA Neo High Torque motor but not 100% certain right now. Will have to open it and look.
A cute and rare thing. Comes with a single high cap mag.... Could probably ship.
----------------------------------------
Unissued Full Swiss M83 TAZ uniform for the large/tall of us. Only worn to try for size... Then I lost a stone and a bit within a month.
Trousers are the all important 38" Waist/32" Leg size which is difficult to find.
The Field shirt is 44-46" Chest.
Also includes brand new helmet cover.
------------------------------------------------
Russian SSO/SPOSN Smersh for SVD and VSS Short mags. Also includes AK Pouches if you want to switch out.
Used twice. Has a little but of dried dirt on it, but completely solid bit of kit, with no obvious loose stitching or other issues. Olive Drab colour. Since the war and COVID started, prices have been going up and up for a new set of these. (180 euros for a new set, not including the spare pouches mine has).
What do you reckon on this?
--------------------------------------
Slightly used FMA Airframe.
I bought this open box in a shop going out of business. I used it twice and never used it again as I decided I am not a helmet guy in the slightest.
It's very solid, has some scratches from storage. Nothing wrong with it otherwise.
It's a large size and fits my 62cm noggin with room to spare.
-----------
There you have it for now! More things will be coming up for appraisal in the next few weeks. Any help with pricing would be ace!
Last edited by a moderator: