Anyone reccomed a mid tier G36
- Thread starter GazeTasty
- Start date
- Thread starter
- #22
is dat same as dis http://www.taiwangun.com/en/electric/608-2-works-j-g
will they work with other branded mags?
Last edited by a moderator:
- Thread starter
- #25
the longer one
what I ment was will it all work the same as the one you linked
- Thread starter
- #27
what I mean is that g3 u sent will it perform the same as the same as the one I sent but maybe fps deference's
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Er what you do realise there is no such thing they are gun model specific.
Where did you get an aftermarket sig hop unit?
- Thread starter
- #29
got confused when looking on shops at them
thought it was some weird airsoft name for em, thought they was all the sameCouple of things..
the JG g36 isn’t externally amazing, but it’s an absolute work horse and very reliable. I’d reccomend buying one to anybody. I would reccomend a maple leaf bucking with it and to run .25-.28 in it.
If youre happy with heavy, expensive, 30 round mags, the we g36c is in my opinion the cheapest usable GBBR currently available. People talk shit about maintenance and taking them apart, but it’s so much easier than an AEG. On the g36c there are 3 pins. You only need to remove 2 of them to completely strip the gun. In less than one minute, you can have the gun stripped, wiped, lubed and put back together it’s that easy.
As for fps.. you can run an NPAS, but I just run a restricter disc. Cost about £4. Run it on propane until it’s too cold then run it on MAPP. Use it all year round.
the JG g36 isn’t externally amazing, but it’s an absolute work horse and very reliable. I’d reccomend buying one to anybody. I would reccomend a maple leaf bucking with it and to run .25-.28 in it.
If youre happy with heavy, expensive, 30 round mags, the we g36c is in my opinion the cheapest usable GBBR currently available. People talk shit about maintenance and taking them apart, but it’s so much easier than an AEG. On the g36c there are 3 pins. You only need to remove 2 of them to completely strip the gun. In less than one minute, you can have the gun stripped, wiped, lubed and put back together it’s that easy.
As for fps.. you can run an NPAS, but I just run a restricter disc. Cost about £4. Run it on propane until it’s too cold then run it on MAPP. Use it all year round.
>CTRL+F: "Specna"
"No results found"
Huh.... that's odd.
@GazeTasty - Check out the Specna G36s. They're supposed to be quite good.
"No results found"
Huh.... that's odd.
@GazeTasty - Check out the Specna G36s. They're supposed to be quite good.
I have an Umarex G36C, fitted a tightbore barrel/maple leaf buckiing and was getting some good range with it, then buggered up the gearbox. Will getting working someday....
It's light, which is why I liked it, but am getting used to carrying heavier kit.
It's light, which is why I liked it, but am getting used to carrying heavier kit.
Last edited by a moderator:
- Thread starter
- #33
Well... Some can be.
It's not necessarily the gun that is dodgy bit the ebb mechanism of flapping the ejection port back and forth.
It's easily disabled with half an hour of spare time then the gun functions just like a normal AEG.
EBB is not worth it at all though. It's more of an audio feature than a recoil. You won't even feel it. Disable it and enjoy the gun
Last edited by a moderator:
djben9
Moderator
- Jul 7, 2015
- 2,371
- 308
ive got a few 'EBBs' by ICS and not had any issues with them, one being just over 2ys old
never noticed any battery issues with mine, using 7.4lipos, but i dont spam the trigger, quite reserved with my shooting so that may help and 90% of the time single shot anyway...conserve my plastic!
@GazeTasty i have the ICS version of the G36, the G33F (not EBB), and i like it, nice and lightweight, but assume you want a gas version or a G36 so may not be worth looking at, although it takes M4 mags so a little useful as most of my AEGS are M4 based so one set of mags and pouches!!
True, its just there to make a little bit of noise....
Last edited by a moderator:
ive got a few 'EBBs' by ICS and not had any issues with them, one being just over 2ys old
never noticed any battery issues with mine, using 7.4lipos, but i dont spam the trigger, quite reserved with my shooting so that may help and 90% of the time single shot anyway...conserve my plastic!
@GazeTasty i have the ICS version of the G36, the G33F, and i liek it, nice and lightweight, but assume you want a gas version or a G36 so may not be worth looking at, although it takes M4 mags so a little useful as most of my AEGS are M4 based so one set of mags and pouches!!
I think the amount of gas wasted on a gbbr opposed to battery on an ebbr is massively different. Unless you're running HPA I imagine batteries last longer than gas does even considering "wasted" power on the bb function.
Last edited by a moderator:
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
SheriffHD
Members
- May 27, 2011
- 814
- 100
So back on topic, You can get a fully licenced by Umarex H&K G36c (which are made by a company called Ares)
Alot of people here they will say that JG are good for the money, and they are. but they dont quality check their guns so alot of duff guns get sent out. which is why I guess why you dont want to go with them again.
So like I said, you can get one made by Ares for around the £150 mark via Gun-Fire (will link at the bottom) Gun fire takes a LONG time before they ship for the first time to you but they will paint the gun for free in the two tone colour that you say you need.
Hope this helps
Link for rifle
https://gunfire.pl/product-eng-1152205098-H-K-G36C-Sportline-subcarbine-replica.html
Link for the paint service on their website so you dont have to try and find it ( you need to add it to your cart when buying a gun)
https://gunfire.pl/product-eng-1152211293-Free-painting-service-Gratis-servico-de-pintura-make-the-airsoft-gun-meet-your-local-law-requirements.html
Med caps for the gun
https://gunfire.pl/product-eng-1152209368-120rds-mid-cap-magazine-for-G36-type-replicas.html
EDIT:
Just a side note, I just realised that Gun-fire also has the WE GBBR on their site at under £200
https://gunfire.pl/product-eng-1152205328-999C-IdZ-GBB-subcarbine-replica.html
Alot of people here they will say that JG are good for the money, and they are. but they dont quality check their guns so alot of duff guns get sent out. which is why I guess why you dont want to go with them again.
So like I said, you can get one made by Ares for around the £150 mark via Gun-Fire (will link at the bottom) Gun fire takes a LONG time before they ship for the first time to you but they will paint the gun for free in the two tone colour that you say you need.
Hope this helps
Link for rifle
https://gunfire.pl/product-eng-1152205098-H-K-G36C-Sportline-subcarbine-replica.html
Link for the paint service on their website so you dont have to try and find it ( you need to add it to your cart when buying a gun)
https://gunfire.pl/product-eng-1152211293-Free-painting-service-Gratis-servico-de-pintura-make-the-airsoft-gun-meet-your-local-law-requirements.html
Med caps for the gun
https://gunfire.pl/product-eng-1152209368-120rds-mid-cap-magazine-for-G36-type-replicas.html
EDIT:
Just a side note, I just realised that Gun-fire also has the WE GBBR on their site at under £200
https://gunfire.pl/product-eng-1152205328-999C-IdZ-GBB-subcarbine-replica.html
Last edited by a moderator:
