Advice
- Thread starter Ashley06
- Start date
EvilMonkee
Members
- Feb 17, 2014
- 2,358
- 1,355
No idea, never heard of that AK or brand before
- Thread starter
- #3
Its called raven evolution
EvilMonkee
Members
- Feb 17, 2014
- 2,358
- 1,355
Yeh I can read. Thanks
Austeyr
Members
- Dec 17, 2024
- 633
- 858
Quality use of time...
Yeah, it'll fit. You'll need to file down the lower handguard retainer and piece that inserts into the receiver like any other AK though so keep that in mind
- Thread starter
- #6
Thanks for the help do u know of any vid that could help me or will I understand when i get itQuality use of time...
Yeah, it'll fit. You'll need to file down the lower handguard retainer and piece that inserts into the receiver like any other AK though so keep that in mind
Austeyr
Members
- Dec 17, 2024
- 633
- 858
I don't know of any videos but... The parts I have circled in red are what you will need to file down. It varies from replica to replica, brand of rail to rail type. Make sure you get a decent file, you're comfortable and have some time because it will take a while to do. It's a simple case of file, check fit, file, check fit, file, check fit until it goes in. You want it to go in snug but not too snug, also if you don't already invest in a rubber mallet to help persuade the handguard to go in.
Also, one other note. The evolution AK's use the same quality metal as the Specna AK's so BE CAREFUL. If you force the handguard into the receiver, you will end up weakening and maybe even cracking the receiver so just take your time and work at it - Don't rush it and force it in and think "It'll do"
If you need any further help, I can take some pictures of my AK handguards to show you what parts to sand better
- Thread starter
- #8
Ill see when i get mine am I cool to dm you when i do itI don't know of any videos but... The parts I have circled in red are what you will need to file down. It varies from replica to replica, brand of rail to rail type. Make sure you get a decent file, you're comfortable and have some time because it will take a while to do. It's a simple case of file, check fit, file, check fit, file, check fit until it goes in. You want it to go in snug but not too snug, also if you don't already invest in a rubber mallet to help persuade the handguard to go in.
Also, one other note. The evolution AK's use the same quality metal as the Specna AK's so BE CAREFUL. If you force the handguard into the receiver, you will end up weakening and maybe even cracking the receiver so just take your time and work at it - Don't rush it and force it in and think "It'll do"
If you need any further help, I can take some pictures of my AK handguards to show you what parts to sand better
View attachment 3002
View attachment 3003
View attachment 3004
EvilMonkee
Members
- Feb 17, 2014
- 2,358
- 1,355
I asked as I have owned literally nearly every brand of AK AEG going, this was not one of them and therefore probably not a good sign as to quality
- Thread starter
- #10
They are a new brand and i know people who own then and had them longer than me and they are pretty good as long as you treat them right
EvilMonkee
Members
- Feb 17, 2014
- 2,358
- 1,355
Raven if I recall = Nuprol. Hard pass from me
Cannonfodder
Members
- Aug 10, 2020
- 3,473
- 5,424
If raven AEGs are anything like their pistols then I wouldn't touch them with a 10ft pole, quality control is terrible to non existent.
