2 cell lipo balanced charging lead, where to buy

[_stylian_]

As above. Just bought an imax b6 charger. Came with a 4 pin balanced charger cable for lipos. But I need a 3 pin one for my mini 2 cell lipos

I can't for the life of me find one online. I can find extentions. I can find adaptors. But no cable

Anyone know where I can get one afforably? 

 

[Philby21]

Might help if you can post a photo of the connector?  There are so many different kinds.

Also, take a look at Component Shop, you might find what you're looking for on there.

 

[_stylian_]

It's a jst xh. I think I'm being a numpty and can use the 4 pin I have for the 3 pin on the lipo. Will check tomorrow

 

[Rogerborg]

I'm confuddled, and pictures would definitely help.

I have these 300mAh 2-cell lipo for my AEP:

They have a 2 pin JST connector for power, and a 3-pin balance connector.

The SkyRC branded B6 clone that I have came with a Deans terminated power cable, with a JST adaptor (see the cable bundle on the left here), and 3, 4 and 5 pin balance charger sockets for 2, 3 and 4 cell lipos.

So to charge my JST 2-cells, I plug their 3-pin balance connector directly into the B6, and also the power cable via the B6's Deans <-> JST adaptor.

All works fine, no drama.

If you've got a different set-up, it would be good to see it.

 

[Musica]

I'm confuddled, and pictures would definitely help.

I have these 300mAh 2-cell lipo for my AEP:



They have a 2 pin JST connector for power, and a 3-pin balance connector.

The SkyRC branded B6 clone that I have came with a Deans terminated power cable, with a JST adaptor (see the cable bundle on the left here), and 3, 4 and 5 pin balance charger sockets for 2, 3 and 4 cell lipos.



So to charge my JST 2-cells, I plug their 3-pin balance connector directly into the B6, and also the power cable via the B6's Deans <-> JST adaptor.

All works fine, no drama.

If you've got a different set-up, it would be good to see it.

Click to shrink...

wouldn't he need to reverse the cable red to black black to red since airsoft are wired back assed? 

if you don't have the leads Roger is talking about component shop should have what you need something like.

https://www.componentshop.co.uk/airsoft-battery-charging-harness.html and https://www.componentshop.co.uk/jst-bec-charger-adapter-lead.html

 

[_stylian_]

I figured it out, turns out looking at kit after a night shift is a bad idea. The imax charger has the port for the balance charger built into it

 

[Rogerborg]

Phew, all is well with the world.  I agree that it's not immediately obvious how to plug everything together until you've done it once.

 

[Musica]

Phew, all is well with the world.  I agree that it's not immediately obvious how to plug everything together until you've done it once.

Click to shrink...

Yea if I hadn't of used the same style charger for my quad copters I would of probably just got a nimh so I didn't have to figure it out.

Is the backwards wiring not important when charging?

 

[Rogerborg]

I'm not sure if the B6 cares about polarity, it's pretty smart.

 

[Musica]

I ordered this so I could charge my airsoft tamiya lipos from my b6. https://www.componentshop.co.uk/female-mini-tamiya-to-deans-male-charger-adapter.html

I do belive if you don't get a airsoft wired tamiya then you need to flip the red to black and black to red on the b6 otherwise it will error on battery test.

 

[_stylian_]

I think it detects backwards polarity before you start. Clever bit of kit, in theory idiot resistant (nothing is proof as I so well demonstrated) 

 

[Rogerborg]

tamiya lipos

Click to shrink...