Jamoy

Okay i was having a think and tinker with the gun the other day. The tech that had tried to previously fix this gun must have jammed in tiny springs on the wrong side of the nozzle. These springs were like maybe 1 cm long? It was causing the nozzle to not seat correctly, you notice the gap of about 4 mm on the underside of the slide. I assumed that this gun didn't have any slide springs as they usually fall out easily as i am careful to not lose these springs, however guns seem to perform well without them. I took these tiny springs out and the nozzle now can fully reciprocate and the gun now closes into battery flawlessly now. The thread can now be closed.

Yea i completely disassembled, cleaned and rebuilt the gun and sprayed with some silicone. Ive not got the mag as the previous "tech" my mate gave it to lost it (yea i know). Il need to see if i can source a mag for it next pay day and give it a shot.

Hey, here you go....

Hello, my friend gave me this old Glock 19, it has no trades on it but i think it is a KWC / KWA glock 19. Serial Number COP471US which when googled appears to take me to pages with KWC/KWA Glock 19 info on it. Basically the gun has this weird issue where the slide will not fully enter battery for some reason. you have to apply significant pressure, more than a few pounds to actually get the slide to travel fully forward. This causes issues where the hammer will light strike the magazine flow valve and the gun will not cycle. Even with the return spring installed its not nearly enough force to push the slide into the forward position resulting in the issue described above. I have attached images of the gun showing the issue. Any idea what is causing this? I think it may be an incorrect nozzle in the gun? A video demonstrating the issue: https://streamable.com/kudgqc