Wild_XIII
-
Posts
7 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Wild_XIII
-
Time Left: 5 days and 12 hours
- For sale
- Used
Selling this as I've been full GBBR for the last couple of years and this is in need of a good home. Chronos around 250 - 260 fps on a .32 bb and really reaches out there. It's got an ASG CNC hop unit installed but it's mainly stock running on a 2022 version gearbox from memory. It's never skipped a beat but doesn't like overloaded magazines. If you fill them until you start feeling it get harder to load then it feeds perfectly. There's probably a fix but I've always liked the more limited capacity. The right side selector has been "deleted" and the once awful selector now smoothly transitions into the fire modes. Genuinely don't want to see this go but needs must. Comes with everything you could ever need. 2x 11.1v 1000maH lipo batteries that fit over the gearbox perfectly. 10x magazines plus 1 broken spare (missing feed jaws and springs) Real steel LPA low profile sights. Yeti Wurks magazine release fitted and spare original release Clone Acro P2 red dot Almost a full set of brand new body parts (upper and lower receivers + pistol grip) and a spare stock 2x Custom kydex mag holsters (one is sadly missing a belt loop) Spare bearing spring guide Clone MS2 sling Atek magwell and other assorted bits Looking for £550 posted but would prefer collection from the Paddock Wood area of Kent due to the sheer amount of stuff. Plus you can have the gun bag if you collect it!£550
- GB
-
Looking at it online it looks like it should take regular hi capa nozzles. It's not got any fancy RMR cuts or anything and I believe Army is the OEM making them.
-
This advert is COMPLETED!
- For sale
- Used
VFC HK53 Gbbr Includes 6x gas tight magazines, scope mount, Delta Point clone optic, telescopic stock, fixed stock, regular handguard and G&P flashlight handguard. Upgraded with Bowman steel barrel and CNC hop dial. The bolt has a CL adjustable valve installed and was last chrono'd at around 260 fps with a .32 bb. Gun is in mint condition, except for the tops of the magazines which all get worn down by the mag well from use. All of the magazines are gas tight and feed perfectly. The dry fire lever has been trimmed down on all of the mags as it caused issues with the mags going into "empty" mode when inserting them. The pictures show it with a T2 red dot clone fitted, but it will come with a Delta Point clone. Looking for £820 posted. I'm not looking to sell things separately so will not be doing splits.£820
Paddock Wood, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
Hardly used WE Sig M17 for sale. Comes with three extended magazines. The hop rubber has been swapped out to an AIP hop rubber which gives it much better range and accuracy. Last chrono'd at around 320 fps on green gas. Selling for £110 posted.£110
Paddock Wood, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
WE P226 non railed version for sale. Comes with original magazine (with a very slow leak), three Vorsk Co2 magazines, Tokyo Marui trade marked grip panels and all of the spare co2 carts that I own. Also comes with a G-Code style kydex holster which it fits perfectly. All stock. Runs 300ish fps on green gas and pushing 340 on the co2 magazines. Looking for £130 posted£130
Paddock Wood, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
Selling this as I don't have time to fix it and my HK53 needs attention. The hammer in the frame needs to be replaced (common issue). It has a temporary fix installed but only fires in full auto. Comes with the suppressor, 5KU stock tube and stock and rubber grip sleeve. The hop rubber has been changed to a 50 degree Maple Leaf Autobot, the rest of the internals are stock. Runs about 330 fps. Looking for £150 posted£150
Paddock Wood, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
Barely used 5KU carbine kit with 5KU 1913 buffer tube adaptor with stock and a spares/repairs lower. I have an HK53 to fix and unfortunately this must go. The carbine kit has light marks from installing parts on it and the screws have some dabs of blue loctite. Everything is super simple to install if you know your way around an AAP. The 1913 buffer tube is solid and only has light wear from the stock. The stock itself has seen some abuse and the rubber plugs are a touch wonky, but it fits nicely and shoulders well. The lower is a spares or repairs job. It needs a new bolt catch (can be ordered from AAC themselves) and a new hammer as the bearing has snapped (common issue). It has a rotary bearing installed currently but semi auto doesn't work with it. Looking for £150 posted.£150
Paddock Wood, Kent - GB
