LukeTunst
-
Posts
39 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by LukeTunst
-
Time Left: 5 days and 3 hours
- Wanted
- Used
After 3-4 35 round TM MWS MagazinesNO VALUE SPECIFIED
-
Time Left: 4 days and 15 hours
- For sale
- Used
Good Condition LPVO from Visionking Illuminates Red/Blue, includes both caps and original box Fits any 30mm Scope mounts £50 Posted£50
-
Time Left: 4 days and 15 hours
- For sale
- Used
Excellent condition Vortex Strikefire 1x Red on an Element Wilcox Mount Includes the original box and included accessories (Original mount etc) £160 Posted£160
-
This advert is COMPLETED!
- For sale
- Used
An excellent modern red dot that includes all the original packaging, manuals and adjustment tool. Vector Frenzy also fall under their "T-VIP" unlimited warranty which gives a vortex style warranty service so even if it gets shot out it can be replaced for free. BBA Killflashes are installed on both lens but can be removed very easily (original front spacers in the box) Needs a bit of dusting but overall in great condition, electrical tape on base to reduce wobble on some rails Full specs here: https://www.tacticalscope.co.uk/vector-optics-frenzy-plus-1x31x26-solar-reflex.html £140 Posted RM24£140
-
Time Left: 4 days and 15 hours
- For sale
- Used
Virtually new PTS handguard for M16 length ARs Has a couple of printed rails on it - you can replace these with MOE spec rail segments, MLOK does not fit this without modification RM48 Posted£25
-
This advert is COMPLETED!
- For sale
- Used
Good Condition VFC P320 with the Bronze custom slide - £250 posted Bundle includes: P320, threaded outer barrel and original box 5 total mags, 4 with printed extended baseplates 3 extra original baseplates 2 tan 1 black Printed thumb saver Original non threaded outer barrel Printed RMR mount which is a bit rough but does work Externally a few marks but shoots and cycles great. Posted RM48 Full specs here: https://www.proactstore.com/products/parabellum-p320-pro-wc-custom-alum-47-bs£250
-
Time Left: 4 days and 15 hours
- For sale
- Used
Quite a few marks here and there, missing a single bolt. Includes a single rail piece and barrel nut - £25 Posted£25
-
This advert is COMPLETED!
- For sale
- Used
Full steel flash hider and outer barrel for VFC/DNA AR Upper receivers - £50 Posted Has been installed but is in otherwise good condition. Threading is 1-1/2" RH SPEC. Full info is here: https://www.proactstore.com/en/products/dna-115-steel-outer-barrel-cmpc https://www.proactstore.com/products/dna-m16a2-flash-hider-1-2-28rh£50
-
This advert is COMPLETED!
- For sale
- Used
Complete EDGI Piston set for the Tac-41 - £65 posted Only selling as I can't get on with the tuning so going to go for silverback's own parts£65
-
This advert is COMPLETED!
- For sale
- Used
Great condition 733 Commando GBBR, I'm only selling as I'd like the M16A2 Includes the following: M733 itself 1x V3 20 Round Stanag XM177 Comp Sling Bolt has standard VFC NPAS Installed (Currently at 1.14j limits on .32s on ASG Orange in current weather) Rest of the rifle is stock aside from upgraded bucking which sends .32s far I can send vids/more pictures if required I'd prefer collection from East Bristol but I can post at cost as I'll need to source a box. I can also include a DNA steel outer and flash hider for an additional £50 found here£400
-
This advert is COMPLETED!
- For sale
- Used
Used very briefly but in good condition - £15 Posted£15
-
This advert is COMPLETED!
- For sale
- Used
Genuine DNC fishtail parka in size small but don't let the size put you off, these are designed to be worn over full combat gear such as plate carriers so will be easily big enough for most humans. I'm 5 foot 11 and the sleeves are long and the tail reaches halfway down my thighs. No liner but in overall good condition£35
-
This advert is COMPLETED!
- For sale
- As new
Selling for a friend. Good condition TM M45 in Black with included TM mag and 2x extra clone mags£110
-
This advert is COMPLETED!
- For sale
- Used
Genuine TA41 2.5x ACOG found on NLAW Launchers - Overall in good nick and I will include 1x of any of the 4 mounts found here for no extra cost: https://bristolbasedairsoft.co.uk/products/ta41-acog-nlaw-picatinny-mounts-mm08£90
-
This advert is COMPLETED!
- For sale
- As new
Virtually unused LevAR thats surplus to requirements as my short stroke kits are all sorted Has only been out the box to test, found hop up nub was misaligned and repositioned. It has been shot less than 20 times. Includes everything in the box, 2 mags are included and I'll include my BBA Short Stroke kit which I can install for the buyer on request for no extra cost. £350 posted via Paypal with PF48£350
-
This advert is COMPLETED!
- For sale
- Used
Selling for a friend, sold as seen. Vortex Sparc AR 1x Red Dot - £150 Posted Vortex VMX-3T 3x Magnifier - £115 Posted Small dark spec in top right of glass, never bothered my friend but this could be warrantied via CSW/Vortex £250 posted if bought together£250
-
This advert is COMPLETED!
- For sale
- Used
Selling for a friend. £350 Posted without Vortex Optics £600 Posted with Both Vortex Optics Good condition TM Recoil M4 SOPMOD Wired to Deans - Completely stock internals Includes: Original box + mag Extra TM Mid cap and 2x black PTS EPM Mid Caps 7.4v Lipo For addition cost a Vortex Sparc AR and Vortex VMX-3T 3X Magnifier can be included£350
-
This advert is COMPLETED!
- For sale
- Used
Bit rough externally but clear glass, was painted previously but I've stripped 99%£100
-
This advert is COMPLETED!
- For sale
- Used
Complete front end kit for MWS originally bought from octagon: https://www.octagonairsoft.com/product-page/fcw-carbon-fiber-mk12-mod-spr-rail-system-for-marui-mws Original outer barrel was snapped but a 1:1 replacement has been made with crudely FSP cuts but does the job perfectly. Quite a few marks here and there hence the price, can send a load more pictures on request - one of the top rail segment screw inserts is loose and screw missing£200
-
This advert is COMPLETED!
- For sale
- Used
Includes: Original box 3 discs 4 C02 Capsules Original loading arm (Printed Extended loading arm installed to make reloading easier) Bought for a project that I never finished, overall in good condition - £50 Posted£50
-
This advert is COMPLETED!
- For sale
- Used
Standard outer included on the M4A1/M4 TM MWS - Includes brass spacer and O ring - £35 Posted£35
-
This advert is COMPLETED!
- For sale
- Used
Allows for bolt release with right hand - Should work with any GBBR/EBB AR Pattern Lower - £12 Posted£12
-
This advert is COMPLETED!
- For sale
- Used
Invader Gear Large UBACS Cadpat - £20 Posted Invader Gear Fast Helmet Cover - £8.50 Posted SOLD Cadpat HPA Line cover - £8.50 Posted £25 posted for both£25
-
This advert is COMPLETED!
- For sale
- Used
Gopro Hero Session 5 with FAST Helmet side mount - £90 Posted Missing side door but works perfectly£90
-
This advert is COMPLETED!
- For sale
- Used
Nuprol FAST SF Air Helmet in Black - £45 Posted Excellent condition, adjustable dial version and has all the padding£45
