ArranLH
-
Posts
87 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by ArranLH
-
This advert is COMPLETED!
- For sale
- Used
For sale, Glock Gen 3 by VFC. Been a solid work horse and trusty back side arm to my primary. It's been well used, as you can tell from the photos. There is some wear on the slide, mainly due to the holster rubbing the paint off. All works as it should and should have plenty of life left in it, could probably do with a fresh nozzle return spring but the current one does the job. Flamingo rubber as stock rubber struggled to lift .32g I might have the stock one somewhere if you really want it. I've also got the box but that's an attic job if you want that too. Comes with 1 gas tight mag. Selling as I fancy a change. £100£100
Tewkesbury, England - GB
-
What mag loader is that? -
This advert is COMPLETED!
- For sale
- Used
PEQ 15 with red laser Works as it should but will not come with the pressure switch as I don't know where it is. Used small dabs of glue on the laser zero dials but should turn with enough force. Not a fan of lasers and use surefire torches instead. £25 Inc postage£25
Tewkesbury, England - GB
-
This advert is COMPLETED!
- For sale
- As new
For sale, swamp deer scope Geissele repro Mount Sight protector Great scope just don't bother using it as I prefer red dots. Will work great on a DMR setup but I've been using it on a standard AR without issue. Does have illumination but when I tried it, it wasnt very bright on the highest setting. May have just been a dead battery. You don't need it though in my opinion. Any questions, let me know. Price includes fees and postage.£70
Gloucester, Gloucestershire - GB
-
This advert is COMPLETED!
- For sale
- Used
For Sale – KWA/ASG MP9 4 x leak free mags Attachments **not included** Artisan Stock Original Stock TNT Hop unit with custom stainless steel nub 14mm CCW outer barrel 2 x spare nozzles Spare Nozzle spring KWA stock valve (400+ fps) Lee precision valves ( -35fps & -50fps) Spare bolt (damaged) Spare 3D printed outer barrel (Will accept standard gbb barrels and hop rubbers) Please read the following - Stock cannot be removed as one of the screws keeps spinning. Will include material should you wish to make your own stainless steel nub. I've currently got it set for .32g it may over hop anything lighter (not tested) even with the hop turned all the way off. Comfortably hitting body size targets up to 40 meters, more than enough for a CQB rif. Power down valve installed to keep it under CQB limits. Chrono was on green gas at 10°C Originally purchased 2nd hand from Airsoft Forum and wasn't running as advertised, I've managed to get it all sorted but because of this, I've lost any love I had for it. Any questions let me know. £250 £10 postage PF48 tracked£250
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Not needed as I no longer have the SSX23 Barely used as I thought it went missing but it's turned up in the bottom of an old bag. Gas tight.. even a year later as it's always had gas in. £25 includes postage and PayPal fees. UK Only£25
Gloucester, Gloucestershire - GB
-
This advert is COMPLETED!
- For sale
- As new
Selling the Odin so this isn't needed and I prefer a classic thumb loader.. because you know.. that thumb strength. Anyway, it's noisy but loads the mags. Only used it on about two mags. Price includes postage and fees.£17.50
- GB
-
This advert is COMPLETED!
- For sale
- As new
Odin sidewinder I did write my surname on it.. to deter anyone who took a fancy to it. I'm sure it'll scrub off or keep it on their as a little momento, up to you!. Price includes PayPal fees and delivery.£35
- GB
-
This advert is COMPLETED!
- For sale
- Used
After some standard MWS mags for my brother (he doesn't know how to use this forum) Let me know your price including postage!NO VALUE SPECIFIED
- GB
-
This advert is COMPLETED!
- For sale
- Used
Magazines for MWS Put down as used but they've hardly been touched. Gas tight £55 Each if you want individual. ONLY 1 REMAINING£55
Gloucester , England - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Tokyo Marui MP5 A5 NGRS 6 X Mags (5 mid-cap + 1 hi-cap) Genuine Magpul MOE handgaurd RIS Rail Attachment Standard Handgaurd CYMA Full Stock Stock Parts Batteries wired to MR30 (deans to MR30 adapter included) Upgraded by Tactical Geordie - NGRS bushings/bearings - FPS Softair NGRS bushings NGRS gearsets - LAYLAX NGRS gearset Eagle 6 NGRS spring - E6 NGRS M95 NGRS piston - Prometheus piston Prometheus AEP flat hop, with Prometheus bridge nub Firing 289 FPS +/-1.2fps on a .28g with a range of upto 70m - can provide videos of this. This thing has been insanely fun to use and put a lot of my other RIFS on the shelf for a long period of time. Was amazing stock however it is a laser now and super snappy thanks to the work by Tactical Geordie, a renowned tech in the NGRS world). Since the upgrades it has seen about 2 or 3 games as I have now made the switch over to GBBR's, hence the reason for the sale. RIF has signs of use but is in a relatively great condition, the mags have signs of use also. I will take serious offers on this, sorry no splitting or trades. Shipping can be arranged and collection is also welcome, buy pays shipping fees. Payment by goods and service only (we are both protected then). Any questions, feel free to ask.£750
Gloucester, Gloucestershire - GB
-
This advert is COMPLETED!
- For sale
- Used
TM FNX45 Extra Mag Nineball 6.03 inner barrel Flamingo Bucking Deadly customs holster Great condition, been very reliable and I've always done my best to keep it clean and lubed. Will come with an additional mag which used to leak but since sealing it, has worked fine with no issues. Deadly customs holster (you will need a mounting for it as I'll be using the current one for something else) I've used upto .32g bb's in it and it's been very accurate with a good range for a sidearm.£150
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
After a strike arm for my MWS seem to be out of stock everywhere. Trying out loads of different hob and nub combos to see what works best for me. Let me know if you have one spare and how much you want.NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
TM MP7A1 GBBR What you get. TM MP7A1 7 Mags, all leak free HK MP7A1 Sling Swivel Mount Original Box Nineball hop rubber installed (No Attachments, these will be removed) Standard muzzle + 14mm CCW muzzle Great little gun not even a year old, Bought it because my older brother has one But Gas is really not for me! HK Swivel mount installed as this prevents the inner shell from cracking at the back, a common TM issue. These seem to be really difficult to get hold of now. Has fantastic range and holds accuracy. Brilliant for CQB and medium range. Used it on an outdoor skirmish and had no issue hitting people with it. Only used a handful of times as this was a backup gun for when my AEG went tits up. After every game, it was used, I cleaned and oiled it, so its looked after. Great little SMG that's a lot of fun to use. I'm open to sensible offers. All comes as a package. No splitting mags or swaps (GHK AK considered or MWS)£450
-
This advert is COMPLETED!
- For sale
- As new
Tokyo Marui MK18 NGRS - Fully Upgraded to the max. This thing is an absolute beast and has served me extremely well. It's fully upgraded, to the point you couldn't physically do anything more to it. All upgrades were done by the incredible Graham at Tactical Geordies so I've got plenty of photos and videos of all work that has been done to it. When I bought it, it was in a bit of a sorry state internally thanks to an old tech but I can hands down say it's a completely different rif now thanks to the magic Graham did on it. You can freely look at the photos and videos he has available of it on his Facebook & Instagram pages. It's very accurate and punches bb's out to 70 Meters. You'd be in the realms of competing against snipers and I've picked off a fair few using it. Now I always swore that I'd never sell it (my mates would even give me stick for putting it up for sale), but I've since bought a Mk18 MWS so this has now gone to the cupboard and stayed there. I've got an MP5 NGRS for when I want to switch out to AEG. I've put a photo up of how I've had it set up in the past, please note it'll come without attachments as these have now ended up on my other MK18 however this should give you an idea of how it can look. Will not come with Case but it's the only photo I had where the mags are ok show too. There are some scuffs on it, it's been used so it's expected and although I try to be careful.. it's Airsoft so it's sure to happen. I've pictured the scuffs, scratches etc. I don't have a box for it but I may have something I could send it in should you want it delivered, it's survived all the trips hundreds of miles it's been sent back and fourth to the tech so I'd have faith it'll survive on its way to you. Or come and collect it, up to you. It's not seen a game since the Leviathan was installed but when you plug it in, it'll say it's fired over 1000 shots, this is due to the Tech fully stress testing the rif to make sure it's running perfectly smooth. It saw one game with the Brushless motor fitted but the gate titan that was previously installed didn't agree to well with the motor and kept throwing up errors, hence the switch to the leviathan (even the tech has stopped installing gates due to their reliability issues). If you have any questions, please let me know. Got plenty of videos of it working as it should along with videos etc. It's cost me considerably more than the price you can have it for. Secure payments only on this so we are both protected. Internals: - Mirror polishing. AoE. Radiusing. 0.05mm shimming. Viton o-rings. - Tappet fin reshaped for ZCI delay chip and fps consistency. - Jefftron Leviathan (Bluetooth and real feel trigger) - Wired to Deans - Laylax trigger pin - FLT NGRS bushings - T238 Brushless Motor - TM bevel gear (better pinion meshing and lower amp draw) - ZCI spur and sector - E6 Enhanced recoil spring - SHS spring guide - E6 M90 - FPS Carbon fibre piston - FPS piston head - FPS cylinder head - FPS nozzle - Lambda One 303mm 6.01mm tightbore - PDI W-hold with red AK2M4 Omega nub Externals: - PTS EPG Grip - PTS EPS Stock Accessories: - 4 x PTS EPM NGRS Magazines - Could provide batteries with it that the tech built the rif with and fit perfectly into the stock. FPS Details: 0.32g - Semi: 270.0 +/- 0.75fps - Auto: 271.3 +/- 1.70fps (17.2rps) - Semi variance: +/- 0.3% - Auto variance: +/- 0.6% Range & Accuracy: - 70 Meters£750
Gloucester, Gloucestershire - GB
-
Wolverine Airsoft MTW Gen 2 Billet Tactical 14" Carbine
ArranLH commented on Connorthescot's advert in Gas Rifles
I'd probably put this in the HPA category and not the GBBR one as you'd probably have a better chance at selling it there. -
This advert is COMPLETED!
- For sale
- Used
Standard MWS mags wanted for a MK18. Please let me know if you have some and what you'd want for themNO VALUE SPECIFIED
Gloucester, Gloucestershire - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
After a buffer kit for my MWS. I actually had this in my basket on fire Support and thought, I'll sort it out the next day.. low and behold it sold out. If you've got one going, it'll be appreciated!NO VALUE SPECIFIED
- GB
-
This advert is COMPLETED!
- For sale
- Used
I need of some MWS mags so if anyone has any that they'd happily part with them please let me know.£1
- GB
-
This advert is COMPLETED!
- For sale
- Used
Tan holy warrior S1 Unity riser Red dot engineering protector This eotech has been described as being the closest replica of the real thing and has a really good, clear sight picture. Other, less expensive, replicas of the eotech are known to have a very tinted sight picture, but not this one. Quick release on the sight with a screw on the other side to apply more or less tension. I got it to achieve that classic MK18 look on my platform but I prefer my LVPO instead. Free, next working day, tracked shipping.£125
Gloucester, Gloucestershire - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Great scope, just don't have anything to put it on anymore. Does have lens covers but the plastic on the front one is missing. This is on the caps themselves and does not effect the actual scope. Free tracked shipping£30
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
1 x stock magazine (that came with the rif) 3 x colt branded magazines I believe these are all 82 round magazines but can be switched the 30 for milsim events. Please note, these are for TM NGRS AEG's only. Free, tracked shipping. Offers welcome. Will not split.£60
- GB
-
Need some advice. Contemplating protecting what little brain cells I have left with a lid. Can anyone recommend a decent one, Ideally I want one that sits low down the forehead, kinda where say your cap or beanie would sit if you wear one. I only mention that as I've had a cheap one in the past and when I wore it, it sat really high up... If that makes sense.
-
This advert is COMPLETED!
- For sale
- Used
Great little rif and always good fun to use. Perfect for CQB thanks to it's small profile but has really good range of you fancy taking it out onto those larger sites. Comes with - 8 gas tight magazines Carry case Spare o rings for the mags HK swivel mount sling point I have serviced this after every game day. With the recent re-grease and oil consisting of a full complete strip of the all internals, clean, re-oil and put back together. I will note that inner shell has fallen victim to the Marui crack on the back however, the HK Sling mount has been installed to reinforce this. The rif functions and runs flawlessly, as it should, without any issue at all. I've installed a maple leaf MR Hop rubber and it'll hop upto .32g without issue. Maybe heavier but I've not tried. I've tried to be as transparent as I can without writing a huge essay but if you have any further questions. Please let me know! PayPal goods and service for your reassurance or bank transfer. Free tracked postage.£450
Gloucester, Gloucestershire - GB
-
This advert is COMPLETED!
- For sale
- Used
Great little rif and always good fun to use. Perfect for CQB thanks to it's small profile but has really good range of you fancy taking it out onto those larger sites. Comes with - 8 gas tight magazines Carry case Spare o rings for the mags HK swivel mount sling point I have serviced this after every game day. With the recent re-grease and oil consisting of a full complete strip of the all internals, clean, re-oil and put back together. I will note that inner shell has fallen victim to the Marui crack on the back however, the HK Sling mount has been installed to reinforce this. The rif functions and runs flawlessly, as it should, without any issue at all. I've installed a maple leaf MR Hop rubber and it'll hop upto .32g without issue. Maybe heavier but I've not tried. I've tried to be as transparent as I can without writing a huge essay but if you have any further questions. Please let me know! PayPal goods and service for your reassurance or bank transfer. Free tracked postage.£450
Gloucester, Gloucestershire - GB
