You can leave your email address to communicate, which was originally designed to fit into the barrel and be used as a prop.
You can leave your email address to communicate, which was originally designed to fit into the barrel and be used as a prop.
First of all, it solves the smoky Wolf problem, and second of all, because this thing is a hassle to transport and in fact if you don't have to transport it it might only cost 60 pounds.
it not same thing, somky wolf due to a structural problem, tracer needed infrared sensing to detect if the BB shot had passed, and the infrared sensing failed after the smoke occurred.
and the oil smoke will condensation in the tube it will seem like lacking oli.
This new one i sell the sensor becomes vibration sensing in a way that you can use to dry fires at home. And this sensor has been tested and will not be triggered by other impacts.
In fact, this thing started to sell half a year earlier than Smoke Wolf, and Smokey Wolf is a copy of this product, and there are problems such as oil leakage and failure
Becasue smokey wolf
It uses infrared sensors, and the smoke will interfere with it, and because of structural problems, the smoke will stay in the inner tube for a long time, so the condensed oil will affect hop-up.
What gas did you use? Is this green gas?
I think it's because the temperature, and if your magazine is hotter than the Gas bottle, you can only pump a little bit of gas in noce time.
The internal movement 29.7mm*91.8mm, can be fitted with a muffler larger than suppressor, the use of soot drive and 3.7V lithium battery drive, the principle is electric heating oil to produce smoke, through the vibration sensor to light the LED light bulb, have not heard of it has serious failure.
Oil is the kind of oil used to smoke models I don't know how to say in English.
1 part
①Upper suspension guide tube
③Springs
④Charging Cable
⑤Battery
⑥Main movement
2Universal size suppressor greater than 29.7 diameter and 918 mm long inside
3 Decomposition and assembly
4 Add the fume oil
①Need to add the lampblack line
②The line has been filled with soot refill
Good idea, even his inventor hasn't decided what to call it, but it has been producing it for a year.
I can send you it manual electronically with accompanying translation if you like.
Unfortunately, due to a structural problem, tracer needed infrared sensing to detect if the BB shot had passed, and the infrared sensing failed after the smoke occurred. So the sensor becomes vibration sensing in a way that you can use to dry fires at home. This sensor has been tested and will not be triggered by other impacts.
Sensor, smoke generator, LED bulb
This is a sample of photographer got last year, and the light bulb was either not installed or turned off
And this internal structure could theoretically fit into most other suppressors.If the number of people who order is more, you can go and negotiate with the manufacturer
In advance, I am not a business, I just want to buy one, along with some of my daily necessities together to send, if anyone wants to buy with me then contact me.
It's about 100 pounds each, If anyone needs it, I'll order it for him. no deposit required.
Without further ado, I just show the videos and pictures.And you can choose different styles for AK or AR like SOCOM or PBS and QDC and osprey.
Any questions can be pointed out in the comments section.
Because I've used it before, it works better than Smokey Wolf
2b54b8924ec748aceb85ab91cc23c47d.mp4
713077638e0d6bcd235f33efb1143ec6.mp4
My Mauser M712 broke a small part, causing my trigger gruop to stop working, and I couldn't find a replacement part anywhere, so I ended up building something like a stopper with electrician tape and solder. then get it done
I didn't know there was such a thing. Ah,There will be no after-sales service if the goods are taken apart
No wonder I haven't heard back in a week. I know the problem. I just need the right pin.
I bought it on surplus store UK. Their website has a special after-sales service mailbox