Hi All,
AEG for refference https://www.patrolbase.co.uk/specna-arms-sa-e39-pdw-edge-tm
Recently started upgrading my stock gearbox , perun v2 hybrid, higher tpa motor. And wanted to drop a 13:1 gearset in.
I bought this zci gear set to drop in the gearbox, shimmed and all happy to use it. Good engagement on the piston and gears, good meshing.
Unfortunately when winding back the gears trough the case to check it all worked I kept noticing that the tappet plate wasn't returning the nozzle to the norrmal position and getting stuck.
I believe this to be due too the bearing guide, anyone had a similar experience with ?
Put stock gears back in and they work fine, they are fitted with a delayer.
